Multistage, non-self-priming, horizontal high-pressure centrifugal pump in block design with horizontal suction port and vertical pressure port and built-in, air-cooled frequency converter. The integrated frequency converter enables variable speed, pressure and PID control.

Speed control

• "Speed control" : Manually with green button or via external signals
• "Differential pressure, constant" : Pressure control with pressure sensor, setpoint adjustment via green button or via external signals
• "PID control": other constant control variables (temperature, volume flow, pressure....) with sensor, setpoint adjustment with green button, by means of external signals

The electronic module provides various protective functions. They include overload protection, the detection of low water, mains undervoltage or overvoltage, high ambient temperature, missing phases, blocked pumps and short-circuits. Error messages are issued on the display.

Short-circuit-proof +24 V voltage output with max. contact strength of 30 mA is present on the electronic module. The module has potential-free contacts for SSM, red and green LED for ON/OFF signal.

Input:

• In1: Input sensor signal 4-20 mA, 0-10 V, 0-20 mA or 2-10 V
• In2: Input setpoint 0-20 mA, 0-10 V, 4-20 mA or 2-10 V

Output:

• + 24 V voltage output with max. contact strength of 50 mA
• Potential-free collective fault and run signals
• External On/Off mode. IR communication
• Plug-in position for Wilo IF-Modules Modbus, BACnet, CAN, PLR, LON for connection to the building automation

This pump has a compact design with a continuous motor pump shaft and a bidirectional mechanical seal.

The pump is suitable for water supply and pressure boosting, industrial recirculation systems, process water and cooling water circuits. It can also be used in fire extinguishing systems, washing systems as well as for irrigation.

Special features/product advantages

• Space-saving, compact block design
• All hydraulic parts which come into contact with the fluid, such as stage chambers, impellers, guide vane apparatuses and pump housings, are made of stainless steel.
• Green-button technology and display enable particularly simple parameterisation and operation of the electronic module.
• Drinking water approval (ACS, KTW, WRAS) for all components in contact with the fluid (EPDM version)

Scope of delivery

• Wilo-Multivert MHIE high-pressure multistage centrifugal pump
• Installation and operating instructions

Design notes

• Optional plug-in IF-Modules
• Sensors are available as accessories.

Operating data

• Fluid media
  Water

Product data

• Min. fluid temperature T_min
  -15 °C
• Max. fluid temperature T_max
  90 °C
• Max. ambient temperature T_max
  50 °C
• Maximum operating pressure PN
  10 bar
• Maximum inlet pressure p inl
  6 bar

Motor data

• Electromagnetic compatibility
  EN 61000-6-1, -2, -3, -4
• Mains connection
  3~400 V, 50/60 Hz
• Voltage tolerance
  400/50:+/-10%_380/60:+/-10%_440/60:+/-6%
• Rated power P₂
  1.10 kW
• Rated current I_N
  3.30 A
• Min. speed n_min
  1005 rpm
• Max. speed n_max
  3260 rpm
• Insulation class
  F
• Protection class
  IP54

Materials

• Pump housing
  1.4404
• Impeller
  1.4404
• Shaft
  1.4404
• Shaft seal
  Q1BVGG
• Gasket material
  FKM

Installation dimensions

• Pipe connection on the suction side RPS
  Rp 1
• Pipe connection on the pressure side RPD
  Rp 1

Information for order placements

• Brand
  Wilo
• Product description
  Economy MHIE 205N-2G (3~380/400/440 V, FKM)
• Net weight, approx. m
  17 kg
• Article number
  4148407