Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-Comfort-Vario COR-1 MVIE...-GE | Wilo
Your advantages
Wilo-Comfort-Vario COR-1 MVIE...-GE

Your advantages

  • Sturdy system due to MVIE series stainless-steel high-pressure centrifugal pumps with air-cooled integrated frequency converter
  • Frequency converter with superproportionally large control range
  • Integrated full motor protection via PTC
  • Integrated dry-running detection with automatic cut-out in event of low water via performance characteristics of the motor control electronics
Series description
Wilo-Comfort-Vario COR-1 MVIE...-GE

Design

Water-supply unit with a non-self-priming high-pressure multistage centrifugal pump and integrated speed control

Application

  • Fully automatic water supply in inlet mode, either from the public water supply network or from a tank.
  • Pumping of drinking water, process water, cooling water, fire water (apart from fire-fighting systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents.

Equipment/function

  • 1 MVIE series pump with infinitely variable control mode via integrated frequency converter
  • All components in contact with the fluid are corrosion-resistant
  • Check valve, pressure side
  • Non-return valve, pressure side
  • Diaphragm pressure vessel 8 l, PN16

Typekey

Example:

Wilo COR-1 MVIE 204/GE

CO

Compact pressure boosting system

R

Regulation (control) by frequency converter

1

With one pump

MVIE

Pump series

2

Rated volume flow of the single pump [m3/h]

04

Number of single-pump stages

GE

GrundEinheit (basic unit); in other words, without an additional control device

Technical data

  • Mains connection 3~400 V ± 10 %, 50 Hz; 3~380 V ±10 %, 60 Hz or, depending on type, also 1~230 V ± 10 %, 50 Hz; 1~220 V ±10 %, 60 Hz (other versions on request)
  • Max. fluid temperature 50 °C (70 °C optional)
  • Max. ambient temperature 40 °C
  • Operating pressure 16 bar
  • Inlet pressure 6 bar
  • Nominal connection diameters on discharge side R 1¼" - R 1½"
  • Nominal connection diameters on inlet side Rp 1¼" - Rp 1½"
  • Speed range 1160 - 3500 rpm
  • Protection class IP 54
  • Fuse protection on mains side AC 3 according to motor power and EVU regulations
  • Approved fluids (other fluids on request):
    • Pure water without settling sediments
    • Process water, cold water, cooling water and rainwater
    • Drinking water

Materials

  • Impellers 1.4301/1.4404 stainless steel
  • Stage chambers 1.4301/1.4404 stainless steel
  • Pump housing EN-GJL-250/1.4404
  • Shaft 1.4057/1.4404 stainless steel
  • Gaskets EPDM (EP851)/FKM (Viton)
  • Housing cover made of 1.4301/1.4404 stainless steel
  • Housing bottom 1.4301/1.4404 stainless steel
  • Mechanical seal B-carbon/tungsten cade, SiC/carbon
  • Pressure shroud 1.4301/1.4404 stainless steel
  • Bearing, tungsten cade
  • Pipework made of 1.4571 stainless steel

Construction

  • Base frame: Galvanised steel with height-adjustable vibration dampers for comprehensive insulation against structure-borne noise
  • Pipework: complete pressure-side pipework made of stainless steel, suitable for the connection of all piping materials used in building services; the pipework is dimensioned according to the overall hydraulic performance of the pressure boosting system
  • Pumps: 1 pump from the series MVIE 2.., 4.., 8.., 16.., 32.. or 52.. (up to max. motor power of 7.5 kW) is used; the adapted, air-cooled frequency converter on the pump motor enables continuous auto control between 25 Hz and a maximum of 65 Hz for all pumps of these series; all pump components in contact with fluid are made of stainless steel.
  • Valves: the pump is fitted on the pressure side with a check valve with DVGW approval mark and a DVGW-approved non-return valve
  • Diaphragm pressure vessel: 8 l/PN16 located on the discharge side with a butyl rubber diaphragm, completely safe in accordance with food safety laws; for testing and inspection purposes, with shut-off ball cock, with drain and throughflow fitting according to DIN 4807

Scope of delivery

  • Factory-mounted, ready for connection pressure-boosting system checked for functionality and impermeability
  • Installation and operating instructions

Options

Other mains connections on request

Documents

Installation and operating instructions

Wilo-MultiVert-MVIE 2G

Article Number 4090994
Edition 0305
Number of pages 22
PDF (1 MB)

Wilo-Helix VE 22-36-52

Article Number 4151995
Edition 1601
Number of pages 39
PDF (8 MB)

Wilo-Helix VE 2-4-6-10-6

Article Number 4151993
Edition 1601
Number of pages 38
PDF (7 MB)

Wilo-SiBoost 2.0 Smart 1, Wilo-SiBoost Smart 1, Wilo-Comfort-Vario COR-1...-GE, Wilo-Comfort-Vario COR/T-1…-GE

Article Number 2535459
Edition 2023-08
Number of pages 72
PDF (31 MB)

General overview

General Overview 2024 - International version

Edition 2022
Number of pages 74
PDF (33 MB)

Certificate REACH

Group Statement REACH

Edition 2021-05
Number of pages 4
PDF (276 KB)