Contact

1-800-266-8866*

*Toll Free

Wilo-Xiro SPC

Series description

Your advantages

  • Heavy-duty version made of cast iron
  • Universally applicable due to a high performance range
  • Easy installation with integrated non-return valve
  • Easy to maintain and repair due to rewindable motors

Construction

Multistage grey cast iron submersible pump in tie strap version for vertical and horizontal installation

Application

  • For process water supply from boreholes and rainwater storage tanks
  • For sprinkling and irrigation
  • Lowering of the water level
  • For pumping water without long-fibre and abrasive constituents

Equipment/function

  • Multistage hydraulics with radial or semi-axial impellers
  • Integrated non-return valve
  • NEMA coupling for 6“ and 8“ hydraulics
  • Rewindable, three-phase AC motor

Scope of delivery

  • Hydraulics and motor ready assembled
  • 4.3 m connection cable
  • Installation and operating instructions

Type key

Example:

Xiro SPC 6.50-09-B1/XI6-18,5-B1

SPC

Submersible pump made of grey cast iron

6

Diameter of the hydraulic unit in inches ["]

50

Rated volume flow at optimum efficiency in m3/h

09

Number of hydraulic stages

B1

Technical key figures for hydraulics

X

Motor construction type: prefilled with water-glycol mixture and rewindable

I

Motor material version: I = Final parts made of stainless steel C = Final parts made of cast iron

6

Diameter of the motor in inches ["]

18.5

Rated motor power P2 in kW

B1

Technical key figures for motor

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3-30 °C
  • Minimum flow rate at motor: 0.2 m/s or 0.5 m/s (depending on performance)
  • Max. sand content: 50 g/m3
  • Max. number of starts: 10 -20/h (depending on performance)
  • Max. immersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: NPT 3 bis NPT 6

Materials

  • Hydraulic housing: EN-GJL-200
  • Impellers: ASTM B145 (bronze)
  • Hydraulic shaft: Stainless steel ASTM A582 (AISI 303)
  • Motor housing: Stainless Steel AISI 304 (1.4301) with final parts in EN-GJL-200
  • Motor shaft: Stainless steel AISI 304 (1.4301)

Description/construction

Submersible pump for vertical or horizontal installation.

Hydraulics

Multistage submersible motor pump with NEMA (6" and 8") or standard connection (10") with radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.

Motor

Rewindable three-phase AC motor with PVC-isolated winding and a water-glycol filling for direct startup. Hydraulic connection as NEMA (6" and 8") or standard connection (10"). Sealing of motor shaft with a mechanical seal made of carbon/ceramic material. Self-lubricating motor bearing. Thrust bearing with rockers for absorption of high axial thrust. Negative axial thrust is absorbed by the rotating seal bearing.

Cooling

The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.

Downloads

REACH regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

General overview 2019 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 74

PDF (42 MB)

Download

Product

PDF: Wilo-Xiro SPC

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download