HiControl 1-EK
Technical data | |
---|---|
Mains connection | 1~230 V, 50/60 Hz |
Min. rated current I | 2 A |
Max. rated current per pump I | 10 A |
Protection class | IP65 |
Inlet connection | G 1 |
Outlet connection | G 1 |
Materials | |
---|---|
Material, housing | PA6 |
Product data | |
---|---|
Brand | Wilo |
Product description | HiControl 1-EK |
Article number | 4190895 |
EAN number | 4048482439648 |
Colour | black/grey |
Minimum order quantity | 1 |
Date of sales availability | 2015-03-01 |
Packaging | |
---|---|
Packaging type | Cardboard box |
Packaging property | Sales packaging |
Pieces per pallet | 1 |
Number per layer | 1 |
Dimension, weight | |
---|---|
Length with packaging | 180 mm |
Length L | 175 mm |
Height with packaging | 175 mm |
Height H | 162 mm |
Width with packaging | 150 mm |
Width W | 142 mm |
Gross weight, approx. m | 1.4 kg |
Net weight, approx. m | 1.3 kg |
Electronic control and regulation accessories. The Wilo HiControl 1 series is used for borehole pumps to enable automatic operation. Wilo-HiControl 1 protects the pump against operation with low volume flow. Thanks to a volume flow sensor and pressure sensor, Wilo-HiControl 1 automates the pump between two values, the start-up pressure and the shut-down volume flow. If the pressure in the network is lower than the start-up pressure, Wilo-HiControl 1 starts the pump. The pump continues to operate until the volume flow falls below the value of the shut-off volume flow.
The interior small container prevents water hammering and cycling.
The Wilo-HiControl 1-EK version with electric cable and built-in socket reduces the time required for installation through direct connection to the pump and to the current.
Wilo-HiControl 1 can be mounted on surface pumps or connected to submersible pumps for domestic water supply.
Special features
- Simple installation
- Especially compact design makes it suitable for many types of installation locations
- High operational reliability due to electronic fault signal
- Protection of the connected pumps due to built-in protection against low water levels
- Simple operation due to clear operating state display
- No additional diaphragm pressure vessel required
- Perfect corrosion protection, due to rust-free materials
- Wired ready-to-plug for fastest installation.
Inline version with input and output in vertical axis and uniform thread connections, suitable for direct connection to the pump housing or wall surface installation with a wall bracket (accessories).
Note
The HiControl 1 may be installed only in vertical position with the output at the top.
Scope of delivery
- HiControl 1 EK
- Including 1.5 m connection cable with EK adapter plug
- Cable tie for quick and secure installation of ready-to-plug pump units
Technical data | |
---|---|
Phases | 1 |
Rated voltage U | 220/230/240 V |
Mains frequency f |
|
Min. rated current I | 2 A |
Max. rated current per pump I | 10 A |
Protection class | IP65 |
Max. fluid temperature | 50 °C |
Max. ambient temperature | 50 °C |
Max. volume flow Q | 8 m³/h |
Inlet connection | G 1 |
Outlet connection | G 1 |
Material, housing | PA6 |
Net weight, approx. | 1.3 kg |
Make | Wilo |
Item no. | 4190895 |