Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Atmos GIGA-I 80/165-18,5/2 | Wilo

Atmos GIGA-I 80/165-18,5/2

Article number: 2220250
Technical data
Hydraulic data
Minimum efficiency index (MEI) ≥0.4
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Motor data
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Motor efficiency class IE3
Rated power P2 18.5 kW
Rated current IN 33 A
Rated speed n 2900 1/min
Power factor cos φ 0.91
Motor efficiency ηM 50% 90.9 %
Motor efficiency ηM 75% 92 %
Motor efficiency ηM 100% 92.1 %
Insulation class F
Protection class motor IP55
Motor protection PTC integrated
Materials
Pump housing 5.1301/EN-GJL-250 KTL-coated
Impeller Grey cast iron EN-GJL-200
Shaft Stainless steel
Mechanical seal AQ1EGG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 80
Pipe connection on the discharge side DNd DN 80
Port-to-port length L0 500 mm

Atmos GIGA-I 80/165-18,5/2

∆: Connection diagram delta connection

Y: Connection diagram star connection

Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases.

P2≤ 3 kW 3~400 V Y
  3~230 V ∆
P2≥ 4 kW 3~690 V Y
  3~400 V ∆

After removing the bridges, Y-∆ start is possible.

Product data
Brand Wilo
Product description Atmos GIGA-I 80/165-18,5/2
Article number 2220250
EAN number 4062679222363
Colour Green
Minimum order quantity 1
Date of sales availability 2022-07-01
Packaging
Packaging type Euro pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 1200 mm
Length L 911 mm
Height with packaging 669 mm
Height H 525 mm
Width with packaging 800 mm
Width W 350 mm
Gross weight, approx. m 235 kg
Net weight, approx. m 210 kg
Tender text

Single-stage glanded centrifugal pump with in-line design for pipe installation or installation on a base. Low-oscillation and low-noise monobloc design with lantern and rigidly connected standard flange motor. With forced-flow circulation, bidirectional bellows mechanical seal and cavitation-reducing impeller. From kW 37 with a cartridge mechanical seal in the back pull-out system for mechanical seal replacement without dismantling the motor. Flange with R 1/8 pressure measuring connections.

All grey cast iron components are cataphoretic-coated.

Pumps with motors ≥ 5.5 kW are equipped as standard with a PTC thermistor sensor for motor protection.

The motor terminal box ≤ 7.5 kW can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant. The motor terminal boxes > 7.5 kW are always made of metal.

  • Mechanical seal for pumping water up to Tmax = +140 °C. Up to T ≤ +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
Operating Data
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Min. ambient temperature Tmin -15 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Minimum efficiency index (MEI) ≥0.4
Motor data
Motor efficiency class IE3
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 18500 W
Rated speed n 2900 1/min
Rated current IN 33 A
Power factor cos φ 0.91
Motor efficiency ηM 50% 90.9 %
Motor efficiency ηM 75% 92 %
Motor efficiency ηM 100% 92.1 %
Insulation class F
Protection class IP55
Materials
Pump housing 5.1301/EN-GJL-250 KTL-coated
Impeller Grey cast iron
Shaft Stainless steel
Shaft seal AQ1EGG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 80
Pipe connection on the discharge side DNd DN 80
Ordering information
Brand Wilo
Product description Atmos GIGA-I 80/165-18,5/2
Net weight, approx. m 210 kg
Article number 2220250
Documents

Installation and operating instructions

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230372
Edition 2023-06
Page format 209.9 x 297.0 mm
Number of pages 148
PDF (7 MB)

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230376
Edition 2023-06
Page format 209.9 x 297.0 mm
Number of pages 72
PDF (7 MB)

Certification booklet

Wilo-CronoLine-IL-E, Wilo-CronoTwin-DL-E, Wilo-CronoBloc-BL-E, Wilo-Atmos GIGA-I/-B, Wilo-CronoLine-IL, Wilo-CronoTwin-DL, Wilo-CronoBloc-BL

Article Number 2216677
Edition 2022-11
Page format 209.9 x 297.0 mm
Number of pages 40
PDF (13 MB)

Certificate REACH

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (262 KB)

Acustic Spectrum (Octave band)

Atmos GIGA-I 80/165-18,5/2

Page format 209.9 x 297.0 mm
Number of pages 1
PDF (165 KB)

BIM/CAD
Accessory

Continuous, infinitely variable control, differential pressure-sensitive CC-HVAC system (26)

Continuous, infinitely variable control, temperature-dependent CC-HVAC system (22)

Continuous, infinitely variable control, differential pressure-sensitive SC-HVAC system (33)

Continuous, infinitely variable control, temperature-dependent SC-HVAC system (27)

Pipe installation, adapter fitting (5)

Wall fixation/installation on a base (1)

Pump control (1)

Pump control/accessories (31)

Pump control/Comfort control system (3)

Pump control/Smart control system (16)