Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-EMU sprinkler pumps D..., K... and KM... | Wilo

Wilo-EMU sprinkler pumps D..., K... and KM...

Your advantages
Wilo-EMU D..., K…, KM...

Your advantages

  • VdS certified
  • Heavy-duty version made of grey cast iron or bronze
  • Pressure shroud in corrosion-free and hygienic stainless steel design with rubber bearings for reducing noise and vibration
Series description
Wilo--EMU D..., K..., KM...

Design

Multistage submersible pump in sectional construction with VdS approval for vertical or horizontal installation for supplying sprinkler systems

Application

For pumping water without long-fibre and abrasive constituents for supplying sprinkler systems

Equipment/function

  • Multistage submersible pump with semi-axial impellers
  • NEMA coupling (depending on type)
  • Three-phase motor for direct or star-delta start
  • Rewindable motors

Typekey

NO VALUE

Technical data

  • Mains connection: 3~400 V/50 Hz
  • Submerged operating mode: S1
  • Max. fluid temperature: 25 °C
  • Max. sand content: 35 g/m3
  • Max. number of starts: 10/h
  • Max. immersion depth: 300 m
  • Protection class: IP68

Construction

Submersible pump for vertical or horizontal installation in tanks to supply sprinkler systems.

Hydraulics

Multistage submersible-motor pump with semi-axial hydraulics. Housing parts made of EN-GJL with 2K coating or G-CuSn10, impellers made of G-CuSn10. Guide housing with casing wear rings made of special bronze. Pressure connection as flange connection.

Motor

Three-phase motor with rewindable PVC-insulated winding for direct and star-delta starting. Motor shroud made of A2/A4-quality stainless steel or steel/G-CuSn10. Pump connection up to 8" overall size as NEMA connection, as standardised connection from 10" and larger. Sealing of motor shaft by the use of a mechanical seal made of solid silicon carbide material.

Thrust bearing with rockers for absorption of high axial thrust. Negative axial thrust is absorbed by the counter-thrust bearing. Self-lubricating bearing. NU… series motors are filled with water-glycol mixture as standard. Alternatively, they can be filled with drinking water (T version). U… series motors generally have to be filled with drinking water.

Cooling

The motor is cooled by the pumped fluid. The motor must always be immersed when operated. Vertical installation is possible with or without cooling jacket. For horizontal installation, bearing brackets must be used for reinforcement of the unit. An anti-vortex plate or cooling jacket may be used to improve the inlet flow.

Pressure shroud

The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar or 5 bar on D 500 unit.

Scope of delivery

  • Hydraulics + motor completely assembled
  • Connection cable in accordance with VDE/KTW, cable cross-section and length per customer request
  • Installation and operating instructions

Options

  • Standard versions available from stock with 25 m cable (supply availability indicated by "L")

Accessories

  • Pressure shroud
  • Bearing brackets and anti-vortex plate
  • Non-return valve (certified, depending on type)
Documents

Installation and operating instructions

Submersible motor pump - motor pre-filled

Article Number 6094322
Edition 2007-05
Number of pages 72
Language en
PDF (1 MB)

Submersible motor pump - motor non-filled

Article Number 6094323
Edition 2007-05
Number of pages 72
Language en
PDF (1 MB)

Submersible motor pump in booster shroud - motor pre-filled

Article Number 6094324
Edition 2007-05
Number of pages 60
Language en
PDF (922 KB)

Submersible motor pump in booster shroud - motor non-filled

Article Number 6094325
Edition 2007-05
Number of pages 68
Language en
PDF (1 MB)

Certification booklet

Wilo-EMU D/DCH/K/KM/SCH (w/ motor), Wilo-EMU D/DCH/K/KM/SCH (w/ motor), Wilo-Actun ZETOS-K8 (w/ motor), Wilo-Actun ZETOS-K10 (w/ motor)

Article Number 6074549
Edition 2021-06
Number of pages 56
Language language neutral
PDF (6 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (327 KB)

VDS Mark

VDS Mark P4080003

Number of pages 4
Language language neutral
PDF (419 KB)