Wilo-Comfort-Vario COR-1 MVIE...GE RBI | Wilo

Wilo-Comfort-Vario COR-1 MVIE...GE RBI

Series: Wilo-Comfort-Vario COR-1 MVIE...EM-GE (non-self-priming) [Historic]

Water-supply unit with a non-self-priming high-pressure multistage centrifugal pump and integrated speed control

Fully automatic water supply in inlet mode, either from the public water supply network or from a tank.
Pumping of drinking water, process water, cooling water, fire water (apart from fire-extinguishing systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents.

1 MVIE RBI series pump with infinitely variable control mode via integrated frequency converter
All components in contact with the fluid are corrosion-resistant
Check valve, pressure side
Non-return valve, pressure side
Diaphragm pressure vessel 8 l, PN16

Example:	Wilo COR-1 MVIE RBI 204/GE
CO	Compact pressure boosting system
R	Regulation (control) by frequency converter
1	With one pump
MVIE RBI	Pump series
2	Rated volume flow of the single pump [m³/h]
04	Number of single-pump stages

Mains connection 3~400 V ± 10 %, 50 Hz; 3~380 V ±10 %, 60 Hz or, depending on type, also 1~230 V ± 10 %, 50 Hz; 1~220 V ±10 %, 60 Hz (other versions on request)
Max. fluid temperature 50 °C (70 °C optional)
Max. ambient temperature 40 °C
Operating pressure 16 bar
Inlet pressure 6 bar
Nominal connection diameters on discharge side R 1¼" - R 1½"
Nominal connection diameters on inlet side Rp 1¼" - Rp 1½"
Speed range 1160 - 3500 rpm
Protection class IP 54
Fuse protection on mains side AC 3 according to motor power and EVU regulations
Approved fluids (other fluids on request):
- Pure water without settling sediments
- Process water, cold water, cooling water and rainwater
- Drinking water

Base frame: Galvanised steel with height-adjustable vibration dampers for comprehensive insulation against structure-borne noise
Pipework: complete pressure-side pipework made of stainless steel, suitable for the connection of all piping materials used in building services; the pipework is dimensioned according to the overall hydraulic performance of the pressure boosting system
Pumps: 1 pump from the series MVIE RBI 2.., 4.., 8.., 16.., 32.. or 52.. (up to max. motor power of 7.5 kW) is used; the adapted, air-cooled frequency converter on the pump motor enables continuous auto control between 25 Hz and a maximum of 65 Hz for all pumps of these series; all pump components in contact with fluid are made of stainless steel.
Valves: the pump is fitted on the pressure side with a check valve with DVGW approval mark and a DVGW-approved non-return valve
Diaphragm pressure vessel: 8 l/PN16 located on the discharge side with a butyl rubber diaphragm, completely safe in accordance with food safety laws; for testing and inspection purposes, with shut-off ball cock, with drain and throughflow fitting according to DIN 4807

Factory-mounted, ready for connection pressure-boosting system checked for functionality and impermeability
Installation and operating instructions

Other mains connections on request

PDF (1 MB)

PDF (8 MB)

PDF (8 MB)

PDF (7 MB)

PDF (8 MB)

Oznaka izdelka	Število črpalk	Količina pretoka Q	Nazivna moč motorja P₂	Številka artikla
COR-1MVIE7002-GE RBI	1	70 m³/uro	11 kW	2993072
COR-1MVIE7003/1-GE RBI	1	70 m³/uro	15 kW	2993073
COR-1MVIE7003/2-GE RBI	1	95 m³/uro	22 kW	2993079
COR-1MVIE7004-GE RBI	1	70 m³/uro	22 kW	2993075
COR-1MVIE7004/2-GE RBI	1	70 m³/uro	18,5 kW	2993074
COR-1MVIE9501-GE RBI	1	95 m³/uro	11 kW	2993076
COR-1MVIE9502-GE RBI	1	95 m³/uro	18,5 kW	2993078
COR-1MVIE9502/1-GE RBI	1	95 m³/uro	15 kW	2993077