Figura similar
Bloque base para motor H20 BG.315
Referencia : 4213077
| Materiales | |
|---|---|
| Material | Acero |
| Datos del producto | |
|---|---|
| Marca | Wilo |
| Denominación del producto | Bloque base para motor H20 BG.315 |
| Referencia | 4213077 |
| Número EAN | 4048482762999 |
| Color | Negro |
| Cantidad mínima de pedido | 1 |
| Disponibilidad en el mercado | 2019-12-01 |
| Embalaje | |
|---|---|
| Tipo de embalaje | Caja de cartón |
| Propiedades del embalaje | Embalaje de transporte |
| Número por palé | 1 |
| Número por capa | 1 |
| Medidas y pesos | |
|---|---|
| Longitud con embalaje | 204 mm |
| Longitud L | 120 mm |
| Altura con embalaje | 120 mm |
| Altura H | 20 mm |
| Ancho con embalaje | 204 mm |
| Ancho W | 120 mm |
| Peso bruto aproximado m | 9,3 kg |
| Peso neto aproximado m | 9,2 kg |
Supporting blocks for installation on a base of monobloc pumps. Comprised of several supporting blocks (number dependent on the pump type), intended for the screwed connection with the screw-on bases or feet of the pump/motor. The supporting blocks ensure secure fastening of the pump to the foundation. Various sets are available for the pump and motor.
Furthermore, they equalise the difference in height between the pump and the motor, if the pump housing is bigger than the axle height of the motor or vice-versa. This prevents turbulent running of the pump and possible premature wear of the mechanical seal.
The set does not contain any fixation material.
Scope of delivery
- Supporting blocks
- Washers
- Alignment plates
- Screws (type depends on the base of the motor)
| Datos técnicos | |
|---|---|
| Material | Acero |
| Peso | 9,2 kg |
| Marca | Wilo |
| Ref. | 4213077 |
Group Statement
Reglamento REACH
| Edición | 2021-05 |
| Número de páginas | 5 |
| Idioma | lengua neutra |
PDF (271 KB)