Drain VC 32/10 (1~230 V)
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 1 bar |
| Free ball passage of the hydraulics | 5 mm |
| Hydraulics type | Open multi-channel impeller |
| Max. immersion depth | 0,77 m |
| Optimal delivery head Hopt | 747,7 kPa |
| Optimal volume flow Qopt | 4,995 m³/h |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 95 °C |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±5 % |
| Rated power P2 | 0,37 kW |
| Power consumption P1 max | 570 W |
| Rated current IN | 3,9 A |
| Activation type | Direct On Line (DOL) |
| Rated speed n | 2672 1/min |
| Max. switching frequency t | 10 1/h |
| Insulation class | F |
| Protection class | IP55 |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Stainless steel |
| Shaft | Stainless steel |
| Motor housing | Aluminium |
| Installation dimensions | |
|---|---|
| Pipe connection on the discharge side DNd | R 1 |
Wilo-Drain VC 32/10 (1~230 V)
| Prices | |
|---|---|
| Price (excl. VAT) | EUR 4,415.- |
| Price group | PG7 |
| ECO-contribution PMCB | EUR 0.01 |
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Drain VC 32/10 (1~230 V) |
| Article number | 2044582 |
| EAN number | 4016322640295 |
| Colour | Green |
| Minimum order quantity | 1 |
| Date of sales availability | 2010-01-01 |
| Packaging | |
|---|---|
| Packaging type | Box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 372 mm |
| Length L | 300 mm |
| Height with packaging | 1390 mm |
| Height H | 1247 mm |
| Width with packaging | 328 mm |
| Width W | 300 mm |
| Gross weight, approx. m | 55 kg |
| Net weight, approx. m | 36 kg |
Vertical wastewater pump in pedestal-type design for pumping fluids at temperatures of up to max. 95 °C. The hydraulics housing is made of cast iron and impeller made of steel. Pressure connection with horizontal pressure outlet and female thread. Drive is provided by a single-phase version standard motor that features a motor housing made of aluminium. Motor protection and connection cable are to be provided on-site. Hydraulics and motor are rigidly connected via the pump shaft (in the shaft protection pipe). The pump shaft is located by a plain bearing and the plain bearing is lubricated by the fluid. A float switch is fitted for automatic operation. Switching points can be set using stops.
| Operating Data |
|---|
| Product data | |
|---|---|
| Hydraulics type | Open multi-channel impeller |
| Free ball passage of the hydraulics | 5 mm |
| Maximum operating pressure PN | 1 bar |
| Fluid temperature T | 3 °C |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±5 % |
| Rated power P2 | 0,37 kW |
| Power consumption P1 max | 0,57 kW |
| Rated current IN | 3,9 A |
| Activation type | Direct On Line (DOL) |
| Rated speed n | 2672 1/min |
| Max. switching frequency t | 10 1/h |
| Insulation class | F |
| Protection class | IP55 |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Stainless steel |
| Shaft | Stainless steel |
| Motor housing | Aluminium |
| Installation dimensions | |
|---|---|
| Pipe connection on the discharge side DNd | R 1 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Drain VC 32/10 (1~230 V) |
| Net weight, approx. m | 36 kg |
| Article number | 2044582 |
Installation and operating instructions
Wilo-Drain VC 32/40
| Article Number | 2047640 |
| Edition | 2007-03 |
| Number of pages | 20 |
| Language | de, en, fr, ru |
PDF (672 KB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (271 KB)3D_DWG
VC32/10 1-230
| Language | language neutral |
DWG (578 KB)3D_STEP
VC32/10 1-230
| Language | language neutral |
STP (818 KB)2D_DWG_TOP
VC32/10 1-230
| Language | language neutral |
DWG (16 KB)2D_DWG_FRONT
VC32/10 1-230
| Language | language neutral |
DWG (21 KB)2D_DWG_RIGHT
VC32/10 1-230
| Language | language neutral |
DWG (21 KB)Mains-independent alarm signal (3) | ||||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Simple mains connection (2) | ||||
Connection cable as material sold by the metre | ||||
Connection cable as material sold by the metre | ||||
Pump control/accessories (1) | ||||
Elektronisches Motorschutzrelais zum Anschluss der Wicklungstemperaturüberwachung mit Wiedereinschaltsperre und Ex-Zulassung. Pro Überwachungskreis (niedrige/hohe Temperatur) muss ein Relais verwendet werden! Geeigent für den Einbau in Schaltschränken mit 35 mm Hutschiene! | ||||
Alarm signal (10) | ||||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | ||||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | ||||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
24 VDC flash light, wall fixation | 2551612 | EUR 434.- | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Cable (2) | ||||
Connection cable as material sold by the metre | ||||
Connection cable as material sold by the metre | ||||
Motor protection (1) | ||||
Elektronisches Motorschutzrelais zum Anschluss der Wicklungstemperaturüberwachung mit Wiedereinschaltsperre und Ex-Zulassung. Pro Überwachungskreis (niedrige/hohe Temperatur) muss ein Relais verwendet werden! Geeigent für den Einbau in Schaltschränken mit 35 mm Hutschiene! | ||||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Commissioning | Commissioning Drainage pumps | 2219491 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||