DrainLift BOX-32/8E O
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 1 bar |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 35 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 35 °C |
| Sound-pressure level | 54 dB |
| Switching volume V | 26 l |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Rated current IN | 2,1 A |
| Protection class | IP68 |
| Phase | 1 |
| Rated speed n | 2900 1/min |
| Number of poles | 2 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 50 1/h |
| Power consumption P1(Q=max.) of selected impeller * number of pumps P1 | 450 W |
| Operating mode (non-immersed) | S3-25% |
| Insulation class | F |
| Materials | |
|---|---|
| Pump housing | PP-GF30 |
| Impeller | PPE/PS-GF20 |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | - |
| Pipe connection on the discharge side DNd | Rp 1¼ |
DrainLift Box 32/8 O; 32/11 O; 40/11 O
| Prices | |
|---|---|
| Price (excl. VAT) | EUR 2,098.- |
| Price group | PG7 |
| ECO-contribution PMCB | EUR 0.26 |
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift BOX-32/8E O |
| Article number | 6093969 |
| EAN number | 4062679243023 |
| Colour | Black |
| Minimum order quantity | 1 |
| Date of sales availability | 2022-08-01 |
| Packaging | |
|---|---|
| Packaging type | Euro pallet |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 1200 mm |
| Length L | 705 mm |
| Height with packaging | 1200 mm |
| Height H | 880 mm |
| Width with packaging | 800 mm |
| Width W | 720 mm |
| Gross weight, approx. m | 48 kg |
| Net weight, approx. m | 26 kg |
Compact and fully-automatic sewage lifting unit for floor-mounted installation within buildings.
Fluid
For collection and pumping of the following in domestic areas:
- Sewage not containing faeces
Sewage pumping according to 12050
The sewage lifting unit meets the requirements of EN 12050-2.
Construction
Gas-tight and watertight collection reservoir made from plastic, with deposit-free interior. Two DN 100 connections at a 180° angle to each other for the inlet as well as venting and cable routing. The discharge connection is located at a 90° angle to the other two connections. For easy maintenance of the unit, the cover serves as an inspection opening.
Sewage pump with integrated turbulator (twister function), open multi-channel impeller and vertical threaded connection. Pump housing, strainer and impeller made of composite material. 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Connection cable with float switch and fitted plug (CEE 7/7).
The twister function guarantees permanent turbulence within the pump's intake area. The turbulence prevents the settling sediments from sinking and settling. This ensures a clean pump sump and reduces the build-up of odours.
The level control takes place via the float switch attached to the pump. The “pump on/off” switching level is determined by the cable length of the float switch.
Scope of delivery
- Plastic chamber with installed pipework
- Pipework with non-return valve
- Pump with float switch and plug
- Pressure hose (inside diameter: 40 mm/1.5 in; length: 7 cm/2.8 in) incl. hose clips
- O-ring to seal tank cover and as anti-syphon trap
- Tank cover (cover plug)
- Fixation material for buoyancy safeguards
- Installation and operating instructions
| Operating Data |
|---|
| Approved field of application | |
|---|---|
| Fluid temperature T | 3 °C |
| Max. fluid temperature, for short periods up to 3 min. T | 60 °C |
| Ambient temperature T | 3 °C |
| Maximum operating pressure PN | 1 bar |
| Max. permissible pressure in the pressure pipe P | 1,7 bar |
| Product data | |
|---|---|
| Gross volume of the tank V | 113 l |
| Switching volume V | 26 l |
| Operating mode (non-immersed) | S3-25% |
| Height H | 880 mm |
| Length L | 705 mm |
| Width W | 720 mm |
| Diagonal dimension Diagonal axis | 720 mm |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 0,37 kW |
| Rated speed n | 2900 1/min |
| Rated current IN | 2,1 A |
| Insulation class | F |
| Protection class motor | IP68 |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 3G1 mm² |
| Mains plug | CEE 7/7 (Schuko) |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | PP-GF30 |
| Impeller | PPE/PS-GF20 |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side | Ø 110 |
| Pipe connection on the discharge side | Ø 40 |
| Connection venting | Ø 110 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift BOX-32/8E O |
| Net weight, approx. m | 26 kg |
| Article number | 6093969 |
Installation and operating instructions
Wilo-DrainLift BOX
| Article Number | 2521833 |
| Edition | 2022-10 |
| Number of pages | 32 |
| Language | en |
PDF (6 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (271 KB)Mains-independent alarm signal (3) | ||||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Fittings (1) | ||||
Shut-off ball cock for switching between 2 circuits:
| ||||
Installation/setup (2) | ||||
Diaphragm hand pump for manual draining of a collection reservoir. Fixed installation and mobile application possible. The pumped-off fluid must flow directly to the discharge pipe or another collection point. | ||||
Collar for securing the baseplate against pressing ground water, with corrosion-resistant clamps. | ||||
Alarm signal (10) | ||||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | ||||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | ||||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
24 VDC flash light, wall fixation | 2551612 | EUR 434.- | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | ||||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||||
Level control (9) | ||||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA65 with 10 m cable | 503211893 | EUR 228.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA65 with 20 m cable | 2004431 | EUR 342.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA65 with 30 m cable | 2004432 | EUR 462.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA KR1 S with 5 m cable | 6082806 | EUR 175.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA KR1 S with 10 m cable | 6082807 | EUR 295.- | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | ||||
Float switch WA65 (PSN-X) with 20 m cable | 6088843 | EUR 238.- | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | ||||
Float switch WA65 (PSN-X) with 10 m cable | 6088844 | EUR 156.- | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | ||||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | ||||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Commissioning | Commissioning Lifting stations (Single pump) | 2219412 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||