Wilo-HiMulti 3 C
Series description


Your advantages
- Simple: Plug & Pump system
- Efficient: Highly efficient hydraulics, low electricity consumption and very compact thanks to motor optimisation
- Automatically operating system and dry-running protection thanks to Wilo-HiControl 1
- Low-noise: Noise level between 56 dB(A) and 64 dB(A)
- 360° rotatable electronic pump control HiControl 1 for easy installation
Construction
Water-supply system with automatic pump control system in non self-priming version (HiMulti 3 C) or self-priming version (HiMulti 3 C P)
Application
- Water supply (drinking water certification in accordance with ACS)
- Sprinkling
- Irrigation and spraying
- Rainwater utilisation
Equipment/function
- Directly flanged motor
- Connection cable with plug
- Thermal motor protection switch
- Automatic pump control
- Low-water cut-out switch
Scope of delivery
- Pump
- Pump control Wilo-HiControl 1
- 1 piece plastic connector with seal for manual connection to the inlet pipe
- Wilo-Connector (electrical quick connector)
- Installation and operating instructions
Type key
Example: | HiMulti 3 C1-24 P |
HiMulti | Multistage, horizontal centrifugal pump for domestic water supply (HI = Home Intelligence) |
3 | Product level (1 for starter level... 5 for premium level) |
C1 | Version with automatic pump control system Wilo-HiControl 1 |
2 | Nominal volume flow in m³/h |
4 | Number of impellers |
P | P = Self-priming version (no specification = non-self-priming version) |
Technical data
- Mains connection: 1~230 V, 50 Hz
- Perm. fluid temperature: 0 °C to +40 °C (+55 °C for 10 min)
- Perm. ambient temperature: -15 °C to +40 °C
- Permissible storage temperature: -30 °C to +60 °C
- Max. permissible operating pressure: 8 bar
- Max. permissible inlet pressure: 3 bar
- Start-up pressure: 1.5 bar
- Switch off volume flow: 95l/h
- Protection class: IP54
- Suction side connection: Rp1
- Connection on pressure side: Rp1
- Information about the automatic can be found in the documentation for Wilo-HiControl 1
Materials
- Pump housing in Technopolymer with ACS, WRAS and KTW drinking certifications
- Impellers and stage casing made of Noryl 30% GF with drinking water certification in accordance with ACS, WRAS and KTW
- Pump cover and shaft made of stainless steel
- Mechanical seal made of ceramic/carbon
- Housing for the pressure monitoring made of Nylon PA6 with drinking water certification in accordance with ACS
Duty chart
Wilo-HiMulti 3 C


Downloads

REACH regulation
Edition | 2018-10 |
Page format | 209.9 x 296.7 mm |
Number of pages | 4 |
PDF (581 kB)
Download
General overview 2019 International version
Article Number | 2200591 |
Edition | 2018 |
Version number | 1 |
Page format | 209.9 x 297.0 mm |
Number of pages | 74 |
PDF (42 MB)
Download
Wilo-HiControl
Article Number | 4196363 |
Edition | 1505 |
Version number | 02 |
Page format | A4 |
Number of pages | 20 |
PDF (875 kB)
Download
Wilo-HiMulti 3
Article Number | 4197440 |
Edition | 1510 |
Version number | 03 |
Page format | A4 |
Number of pages | 27 |
PDF (7 MB)
Download