Wilo-Multivert MVI

Series description

Your advantages

  • Corrosion-resistant impellers, diffusors and stage housings
  • Drinking water approval for all components that come in contact with the fluid (EPDM version)

Construction

Non-self-priming, multistage high-pressure centrifugal pump in vertical design with in-line connections.

Application

  • Water supply and pressure boosting
  • Fire extinguishing systems
  • Boiler feed
  • Industrial circulation systems
  • Process engineering
  • Cooling water circulation systems
  • Washing and sprinkling systems

Equipment/function

  • MVI 70.. and 95..: PN16 and PN25 version with round flange

Scope of delivery

  • MVI high-pressure multistage centrifugal pump
  • MVI 1.. – 8..: Oval counter flanges with corresponding screws and O-rings (PN16 variant)
  • Installation and operating instructions

Type key

Example:

MVI 7002/1-3/16/E/3-400-50-2

MVI

Vertical high-pressure multistage centrifugal pump

70

Flow rate in m3/h

02

Number of impellers

1

Number of trimmed impellers

3

3= pump housing EN-GJL-250 (cataphoretic coating), hydraulics 1.4301 (AISI 304)

16

Flange type 16 = flange PN16 (round or oval) 25 = flange PN25 (round or oval)

E

Gasket type E = EPDM V = FKM (Viton)

3

3 = 3~ (three-phase current)

400

Connection voltage in V

50

Frequency in Hz

2

Number of poles

Technical data

  • Electrical connection:
    • 3~400 V (±10 %), 50 Hz
    • ≤ 4 kW 230 V/ 400 V; Δ/Y
    • > 4 kW 400 V/ 690 V; Δ/Y
  • Fluid temperature of -15 to +120 °C (with EPDM), (-15 to +90 °C with FKM)
  • Operating pressure max. 16/25 bar
  • Max. inlet pressure of 10 bar
  • Protection class IP 55
  • Flange connections:
  • MVI 70../95.. PN 16/PN 25: Round flange (DN 100)

Materials

MVI 70../95..:

  • Impellers of stainless steel 1.4408 (AISI 316)
  • Stage chambers made of 1.4301 (AISI 304) stainless steel
  • Pump housing made of cataphoretic-coated grey cast iron EN-GJL 250
  • Shaft 1.4057 (AISI 431) stainless steel
  • Gasket EPDM
  • Housing cover made of 1.4301 (AISI 304) stainless steel
  • Housing bottom made of 1.4301 (AISI 304) stainless steel
  • Mechanical seal of B-carbon/tungsten carbide, SiC/carbon
  • Pressure shroud made of 1.4301 (AISI 304) stainless steel
  • Bearing of tungsten carbide

Duty chart

Multivert MVI 1 - 95

Pump curves in accordance with ISO 9906: 2012 3B

Downloads

REACH regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

General overview 2019 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 74

PDF (42 MB)

Download

Wilo-Multivert-MVI 2.. / 4.. / 8.. / 16..-6

Article Number 2050778
Edition 1502
Version number 07
Page format A4
Number of pages 15

PDF (861 kB)

Download

Wilo-Multivert-MVI 2.. / 4.. / 8.. / 16..-6

Article Number 2050778
Edition 1502
Version number 07
Page format A4
Number of pages 100

PDF (3 MB)

Download

Wilo-MultiVert MVI 16../32../52../70../95..

Article Number 2040502
Edition 1606
Version number 08
Page format A4
Number of pages 17

PDF (984 kB)

Download

Wilo-Multivert MVI 16../32../52../70../95..

Article Number 2040502
Edition 1606
Version number 08
Page format A4
Number of pages 14

PDF (1 MB)

Download

Wilo-MultiVert-MVI 2.. / 4.. / 8.. / 16..-6

Article Number 2050778
Edition 1502
Version number 07
Page format A4
Number of pages 15

PDF (970 kB)

Download

Product

PDF: Wilo-Multivert MVI

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download