CRE 10-1 | Wilo

CRE 10-1

Number of results: 2

Flow

Head / Pump pressure

Product design type	High-pressure multistage centrifugal pump	High-pressure multistage centrifugal pump	Existing pump



Description
Product description	Helix2.0-VE 1001-1/16/E/KS/3	Helix2.0-VE 1001-1/16/E/S/3	CRE 10-1
Article number	4250776	4250777	-
Series	Wilo-Helix2.0-VE	Wilo-Helix2.0-VE	-
Mains connection	3~380 V ±10%, 50/60 Hz	3~380 V ±10%, 50/60 Hz	-
	3~400 V ±10%, 50/60 Hz	3~400 V ±10%, 50/60 Hz	-
	3~440 V ±10%, 50/60 Hz	3~440 V ±10%, 50/60 Hz	-
Port-to-port length	-	-	200 mm
Pump connection	G 1½	G 1½	-
Display	Graphic colour display (2 inches)	Graphic colour display (2 inches)	-
Comment	Check connection Check duty point	Check connection Check duty point	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	User-defined PID control	User-defined PID control	-
	Constant speed (n-const.)	Constant speed (n-const.)	-
	Constant pressure p-c	Constant pressure p-c	-
Special features of the series	Pump kick	Pump kick	-
	Volume flow based on differential pressure sensor	Volume flow based on differential pressure sensor	-
Multi pump operation	Operation/reserve during twin-head pump operation	Operation/reserve during twin-head pump operation	-
Equipment
Cable glands for sensors and communication	Mains connection	Mains connection	-
	Communication	Communication	-
Service	Access and setting via HMI and the green button as well as via the switch return button and cable connection to the laptop	Access and setting via HMI and the green button as well as via the switch return button and cable connection to the laptop	-
	Error codes	Error codes	-
	Wilo Service: Historical data collection for analysis of pump operation and read out by the Wilo Service tool	Wilo Service: Historical data collection for analysis of pump operation and read out by the Wilo Service tool	-
Connectivity
Analogue signal as standard	0-10 V	0-10 V	-
	4-20 mA	4-20 mA	-
Digital output	SSM or SBM	SSM or SBM	-
Digital input	Ext. OFF	Ext. OFF	-
Bus communication via additional accessories	BACnet MS/TP	BACnet MS/TP	-
	LON	LON	-
	Modbus RTU	Modbus RTU	-
	CANopen	CANopen	-
	PLR	PLR	-
	Ethernet	Ethernet	-
Motor data
Phases	3	3	3
Mains connection	3~380 V, 50/60 Hz	3~380 V, 50/60 Hz	3~400 V, 50 Hz
Rated power	750 W	750 W	-
Power consumption	940 W	940 W	-
Electromagnetic compatibility	EN 61000-6-1, -2, -3, -4	EN 61000-6-1, -2, -3, -4	-
Insulation class	F	F	-
Protection class	IP55	IP55	-
Pipe connection
Inlet connection	G 1½	G 1½	Rp 1½
PN connection on suction side	PN 16	PN 16	PN 16
Outlet connection	G 1½	G 1½	Rp 1½
PN connection on discharge side	PN 16	PN 16	PN 16
Dimension, weight
Length with packaging	1200 mm	1200 mm	-
Length	344 mm	344 mm	-
Height with packaging	600 mm	600 mm	-
Height	764 mm	728 mm	601 mm
Width with packaging	400 mm	400 mm	-
Width	235 mm	235 mm	-
Gross weight, approx.	44.9 kg	39.2 kg	-
Net weight, approx.	36.9 kg	31.2 kg	-
Ordering information
Product description	Helix2.0-VE 1001-1/16/E/KS/3	Helix2.0-VE 1001-1/16/E/S/3	CRE 10-1
Brand	Wilo	Wilo	Grundfos
EAN number	4062679218625	4062679218632	-
Article number	4250776	4250777	-

Data sheet

Description
Product description	CRE 10-1
Brand	Grundfos
Port-to-port length l0	200 mm

Motor data
Phases	3
Mains connection	3~400 V, 50 Hz

Pipe connection
Inlet connection	Rp 1½
PN connection on suction side	PN 16
Outlet connection	Rp 1½
PN connection on discharge side	PN 16

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.