MAGNA3 32-60 FN | Wilo

MAGNA3 32-60 FN

Number of results: 2

Flow

Head / Pump pressure

Product design type	Glandless premium smart-pump	Glandless premium smart-pump	Existing pump



Description
Product description	Stratos MAXO-Z 30/0,5-8 PN 10	Stratos MAXO-Z 32/0,5-8 PN 6/10	MAGNA3 32-60 FN
Article number	2164670	2164672	98126822, 98333857
Series	Wilo-Stratos MAXO-Z	Wilo-Stratos MAXO-Z	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length	180 mm	220 mm	220 mm
Pump connection	G 2	DN 32	-
Pump connection (alternative designation)	RP 1 1/2	-	-
	DN 30	-	-
Display	Graphic colour display (4.3 inches)	Graphic colour display (4.3 inches)	-
Comment	Change piping	Fits without modifications	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	Q limit for limiting the maximum volume flow	-
	Dynamic Adapt plus	Dynamic Adapt plus	-
	ΔT-const. for constant differential temperature control	ΔT-const. for constant differential temperature control	-
	T-const. for constant temperature control	T-const. for constant temperature control	-
	Constant Q for constant volume flow control	Constant Q for constant volume flow control	-
	Multi Flow Adaptation	Multi Flow Adaptation	-
	Δ T-const. for constant differential temperature control	Δ T-const. for constant differential temperature control	-
	User-defined PID control	User-defined PID control	-
	Constant speed (n-const.)	Constant speed (n-const.)	-
Special features of the series	Heating/Cooling switching	Heating/Cooling switching	-
	Thermal desinfection	Thermal desinfection	-
	Night set back	Night set back	-
	Heat quantity measurement	Heat quantity measurement	-
	Cooling quantity measurement	Cooling quantity measurement	-
	Key locking function	Key locking function	-
	No-Flow Stop	No-Flow Stop	-
	Adjustable volume flow limiter	Adjustable volume flow limiter	-
	Ability to save and restore configured pump settings (3 restoration points)	Ability to save and restore configured pump settings (3 restoration points)	-
	Fault message and warning message in plain text including suggested remedy	Fault message and warning message in plain text including suggested remedy	-
Multi pump operation	Main/Standby	Main/Standby	-
	Parallel operation	Parallel operation	-
Measurement value logging	Heat and cooling capacity measurement	Heat and cooling capacity measurement	-
Display	Setpoint	Setpoint	-
	Actual delivery head	Actual delivery head	-
	Actual volume flow	Actual volume flow	-
	Actual power consumption	Actual power consumption	-
	Energy consumption	Energy consumption	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-
	Control mode	Control mode	-
	Active influences (e.g. STOP)	Active influences (e.g. STOP)	-
Display (can also be selected)	Speed	Speed	-
	Heating quantity	Heating quantity	-
	Cooling quantity	Cooling quantity	-
	Operating hours	Operating hours	-
	Mains voltage	Mains voltage	-
	Warning message	Warning message	-
	Error message	Error message	-
Pump venting function	Yes	Yes	-
Dry-running detection	yes	yes	-
Equipment
Thermal insulation shell	Yes	Yes	-
Cold water insulation shell	As accessories	As accessories	-
Quick electrical connection	Wilo Connector	Wilo Connector	-
Connectivity
Analogue signal as standard	0-10 V	0-10 V	-
	2-10 V	2-10 V	-
	4-20 mA	4-20 mA	-
	0-20 mA	0-20 mA	-
	PT1000	PT1000	-
Digital output	SSM	SSM	-
	SBM	SBM	-
Digital input	Ext. OFF	Ext. OFF	-
	Ext. MIN	Ext. MIN	-
	Ext. MAX	Ext. MAX	-
	MANUAL (BMS-OFF)	MANUAL (BMS-OFF)	-
	Key lock	Key lock	-
	Switchover between heating/cooling mode	Switchover between heating/cooling mode	-
Bus communication via additional accessories	BACnet MS/TP	BACnet MS/TP	-
	LON	LON	-
	Modbus RTU	Modbus RTU	-
	CANopen	CANopen	-
	PLR	PLR	-
	BACnet IP	BACnet IP	-
	Modbus TCP	Modbus TCP	-
Access via the Wilo-Assistant app	No	No	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	Via Wilo-Smart Gateway	-
wire data exchange and remote operation	Bluetooth	Bluetooth	-
Motor data
Phases	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50 Hz
Energy efficiency index (EEI)	≤0.19	≤0.18	-
Min current	0.11 A	0.11 A	-
Max current	1.05 A	1.1 A	-
Rated power	133 W	133 W	-
Min. speed	750 1/min	750 1/min	-
Max. speed	3600 1/min	3550 1/min	-
Power consumption	7 W	7 W	-
Power consumption	160 W	160 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	-
Protection class	IPX4D	IPX4D	-
Materials
Bearing	Carbon-graphite	Carbon-graphite	-
Pipe connection
Inlet connection	G 2	DN 32	DN 32
PN connection on suction side	PN 10	PN 6/10	PN 6/10
Outlet connection	G 2	DN 32	DN 32
PN connection on discharge side	PN 10	PN 6/10	PN 6/10
Dimension, weight
Length with packaging	400 mm	800 mm	-
Length	335 mm	345 mm	-
Height with packaging	263 mm	394 mm	-
Height	180 mm	220 mm	-
Width with packaging	300 mm	600 mm	-
Width	210 mm	212 mm	-
Gross weight, approx.	8.6 kg	15.2 kg	-
Net weight, approx.	7.5 kg	10.7 kg	-
Ordering information
Product description	Stratos MAXO-Z 30/0,5-8 PN 10	Stratos MAXO-Z 32/0,5-8 PN 6/10	MAGNA3 32-60 FN
Brand	Wilo	Wilo	Grundfos
EAN number	4048482700120	4048482700144	-
Article number	2164670	2164672	98126822, 98333857

Data sheet

Description
Product description	MAGNA3 32-60 FN
Brand	Grundfos
Article number	98126822, 98333857
Port-to-port length l0	220 mm

Motor data
Phases	1
Mains connection	1~230 V, 50 Hz

Pipe connection
Inlet connection	DN 32
PN connection on suction side	PN 6/10
Outlet connection	DN 32
PN connection on discharge side	PN 6/10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.