UPS 40-50 F | Wilo

UPS 40-50 F

Number of results: 4

Flow

Head / Pump pressure

Product design type	Glandless standard high-efficiency pump	Glandless premium smart-pump	Glandless standard high-efficiency pump	Glandless premium smart-pump	Existing pump



Description
Product description	Yonos MAXO 40/0,5-4 PN 6/10	Stratos MAXO 40/0,5-4 PN6/10	Yonos MAXO 30/0,5-12 PN 10	Stratos MAXO 30/0,5-12 PN 10	UPS 40-50 F
Article number	2120645	2164582	2120644	2164576	95906420
Series	Wilo-Yonos MAXO	Wilo-Stratos MAXO	Wilo-Yonos MAXO	Wilo-Stratos MAXO	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length	-	-	-	-	250 mm
Pump connection	DN 40	DN 40	G 2	G 2	-
Pump connection (alternative designation)	-	-	RP 1 1/2	RP 1 1/2	-
	-	-	DN 30	DN 30	-
Display	LED segment display	Graphic colour display (4.3 inches)	LED segment display	Graphic colour display (4.3 inches)	-
Comment	Works with other accessories without the need to change any piping	Works with other accessories without the need to change any piping	Works with other accessories without the need to change any piping	Works with other accessories without the need to change any piping	-
Fitting piece (PN6)	1 x 110586593 Intermediate flange pieces F 1, DN 40x30mm, PN 6	1 x 110586593 Intermediate flange pieces F 1, DN 40x30mm, PN 6	2 x 110851797 Flanged ring RF 12, PN6	2 x 110851797 Flanged ring RF 12, PN6	-
	-	-	1 x 110851098 Intermediate flange pieces F 26, DN 40x50mm, PN 6	1 x 110851098 Intermediate flange pieces F 26, DN 40x50mm, PN 6	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Constant speed (3 speed stages)	-	Constant speed (3 speed stages)	-	-
	-	Q limit for limiting the maximum volume flow	-	Q limit for limiting the maximum volume flow	-
	-	Dynamic Adapt plus	-	Dynamic Adapt plus	-
	-	ΔT-const. for constant differential temperature control	-	ΔT-const. for constant differential temperature control	-
	-	T-const. for constant temperature control	-	T-const. for constant temperature control	-
	-	Constant Q for constant volume flow control	-	Constant Q for constant volume flow control	-
	-	Multi Flow Adaptation	-	Multi Flow Adaptation	-
	-	Δ T-const. for constant differential temperature control	-	Δ T-const. for constant differential temperature control	-
	-	User-defined PID control	-	User-defined PID control	-
	-	Constant speed (n-const.)	-	Constant speed (n-const.)	-
Special features of the series	-	Heating/Cooling switching	-	Heating/Cooling switching	-
	-	Night set back	-	Night set back	-
	-	Heat quantity measurement	-	Heat quantity measurement	-
	-	Cooling quantity measurement	-	Cooling quantity measurement	-
	-	Key locking function	-	Key locking function	-
	-	No-Flow Stop	-	No-Flow Stop	-
	-	Reset function to factory setting	-	Reset function to factory setting	-
	-	Adjustable volume flow limiter	-	Adjustable volume flow limiter	-
	-	Ability to save and restore configured pump settings (3 restoration points)	-	Ability to save and restore configured pump settings (3 restoration points)	-
	-	Fault message and warning message in plain text including suggested remedy	-	Fault message and warning message in plain text including suggested remedy	-
Multi pump operation	Main/Standby (with Connect Module Yonos MAXO)	-	Main/Standby (with Connect Module Yonos MAXO)	-	-
	-	Main/Standby	-	Main/Standby	-
	-	Parallel operation	-	Parallel operation	-
Measurement value logging	-	Heat and cooling capacity measurement	-	Heat and cooling capacity measurement	-
Display	Setpoint	Setpoint	Setpoint	Setpoint	-
	Fault signals (error codes)	-	Fault signals (error codes)	-	-
	-	Actual delivery head	-	Actual delivery head	-
	-	Actual volume flow	-	Actual volume flow	-
	-	Actual power consumption	-	Actual power consumption	-
	-	Energy consumption	-	Energy consumption	-
	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-
	-	Warning messages in plain text (display status: yellow)	-	Warning messages in plain text (display status: yellow)	-
	-	Error messages in plain text (display: red)	-	Error messages in plain text (display: red)	-
	-	Pump venting (display status: blue)	-	Pump venting (display status: blue)	-
	-	Control mode	-	Control mode	-
	-	Active influences (e.g. STOP)	-	Active influences (e.g. STOP)	-
Display (can also be selected)	-	Speed	-	Speed	-
	-	Heating quantity	-	Heating quantity	-
	-	Cooling quantity	-	Cooling quantity	-
	-	Operating hours	-	Operating hours	-
	-	Mains voltage	-	Mains voltage	-
	-	Warning message	-	Warning message	-
	-	Error message	-	Error message	-
Pump venting function	-	Yes	-	Yes	-
Dry-running detection	-	yes	-	yes	-
Equipment
Thermal insulation shell	As accessory	Yes	As accessory	Yes	-
Cold water insulation shell	-	As accessories	-	As accessories	-
Quick electrical connection	Wilo plug	Wilo Connector	Wilo plug	Wilo Connector	-
Blocking-current proof motor	yes	yes	yes	yes	-
Particle filter	yes	yes	yes	yes	-
Key lock	-	yes	-	yes	-
Fluid temperature sensor	-	Integrated	-	Integrated	-
Connectivity
Analogue signal as standard	-	0-10 V	-	0-10 V	-
	-	2-10 V	-	2-10 V	-
	-	4-20 mA	-	4-20 mA	-
	-	0-20 mA	-	0-20 mA	-
	-	PT1000	-	PT1000	-
Digital output	SSM/SBM (via accessories Connect module Yonos MAXO)	-	SSM/SBM (via accessories Connect module Yonos MAXO)	-	-
	-	SSM	-	SSM	-
	-	SBM	-	SBM	-
Digital input	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	-
	-	Ext. OFF	-	Ext. OFF	-
	-	Ext. MIN	-	Ext. MIN	-
	-	Ext. MAX	-	Ext. MAX	-
	-	MANUAL (BMS-OFF)	-	MANUAL (BMS-OFF)	-
	-	Key lock	-	Key lock	-
	-	Switchover between heating/cooling mode	-	Switchover between heating/cooling mode	-
Bus communication via additional accessories	-	BACnet MS/TP	-	BACnet MS/TP	-
	-	LON	-	LON	-
	-	Modbus RTU	-	Modbus RTU	-
	-	CANopen	-	CANopen	-
	-	PLR	-	PLR	-
	-	BACnet IP	-	BACnet IP	-
	-	Modbus TCP	-	Modbus TCP	-
Access via the Wilo-Assistant app	-	Yes	-	Yes	-
Connection for Wilo-Smart Cloud	-	Via Wilo-Smart Gateway	-	Via Wilo-Smart Gateway	-
wire data exchange and remote operation	-	Bluetooth	-	Bluetooth	-
Motor data
Phases	1	1	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50 Hz
Energy efficiency index (EEI)	≤0,20	≤0,19	≤0,20	≤0,19	-
Min current	0,09 A	0,11 A	0,15 A	0,11 A	-
Max current	1 A	0,93 A	1,33 A	1,28 A	-
Rated power	90 W	99 W	230 W	262 W	-
Min. speed	1200 1/min	750 1/min	1000 1/min	750 1/min	-
Max. speed	3700 1/min	2600 1/min	4800 1/min	4350 1/min	-
Power consumption	7 W	7 W	10 W	7 W	-
Power consumption	120 W	130 W	305 W	295 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	F	F	-
Protection class	IPX4D	IPX4D	IPX4D	IPX4D	-
Sound-pressure level	-	27 dB	-	-	-
Materials
Material	Grey cast iron	Grey cast iron	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PPS-GF40	PPE/PS-GF30	PPS-GF40	-
Shaft	Stainless steel	Stainless steel	Stainless steel	1.4122, DLC-coated	-
Bearing	Carbon-graphite	Carbon-graphite	Carbon-graphite	Carbon, antimony-impregnated	-
Pipe connection
Inlet connection	DN 40	DN 40	G 2	G 2	DN 40
PN connection on suction side	PN 6/10	PN 6/10	PN 10	PN 10	PN 6/10
Outlet connection	DN 40	DN 40	G 2	G 2	DN 40
PN connection on discharge side	PN 6/10	PN 6/10	PN 10	PN 10	PN 6/10
Dimension, weight
Length with packaging	400 mm	600 mm	400 mm	400 mm	-
Length	223 mm	355 mm	225 mm	350 mm	-
Height with packaging	395 mm	394 mm	263 mm	263 mm	-
Height	240 mm	220 mm	244 mm	180 mm	-
Width with packaging	300 mm	400 mm	300 mm	300 mm	-
Width	150 mm	227 mm	128 mm	210 mm	-
Gross weight, approx.	10,2 kg	14,8 kg	7 kg	8,6 kg	-
Net weight, approx.	8,6 kg	11,4 kg	5,4 kg	7,5 kg	-
Ordering information
Product description	Yonos MAXO 40/0,5-4 PN 6/10	Stratos MAXO 40/0,5-4 PN6/10	Yonos MAXO 30/0,5-12 PN 10	Stratos MAXO 30/0,5-12 PN 10	UPS 40-50 F
Brand	Wilo	Wilo	Wilo	Wilo	Grundfos
EAN number	4048482235929	4048482699585	4048482235912	4048482699462	-
Article number	2120645	2164582	2120644	2164576	95906420

Data sheet

Description
Product description	UPS 40-50 F
Brand	Grundfos
Article number	95906420
Port-to-port length l0	250 mm

Motor data
Phases	1
Mains connection	1~230 V, 50 Hz

Pipe connection
Inlet connection	DN 40
PN connection on suction side	PN 6/10
Outlet connection	DN 40
PN connection on discharge side	PN 6/10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.