UPSD 32-120 F | Wilo

UPSD 32-120 F

Number of results: 4

Flow

Head / Pump pressure

Product design type	Glandless standard high-efficiency pump	Glandless premium smart twin-head pump	Glandless premium smart twin-head pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Yonos MAXO-D 32/0,5-11 PN 6/10	Stratos MAXO-D 32/0,5-12 PN 6/10	Stratos MAXO-D 40/0,5-12 PN 6/10	Yonos MAXO-D 40/0,5-12 PN 6/10	UPSD 32-120 F
Article number	2120663	2164648	2164650	2120665	96408894
Series	Wilo-Yonos MAXO-D	Wilo-Stratos MAXO-D	Wilo-Stratos MAXO-D	Wilo-Yonos MAXO-D	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length	-	-	-	-	220 mm
Pump connection	DN 32	DN 32	DN 40	DN 40	-
Display	LED segment display	Graphic colour display (4.3 inches)	Graphic colour display (4.3 inches)	LED segment display	-
Comment	Fits without modifications	Fits without modifications	Change piping	Change piping	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Constant speed (3 speed stages)	-	-	Constant speed (3 speed stages)	-
	-	Q limit for limiting the maximum volume flow	Q limit for limiting the maximum volume flow	-	-
	-	Dynamic Adapt plus	Dynamic Adapt plus	-	-
	-	ΔT-const. for constant differential temperature control	ΔT-const. for constant differential temperature control	-	-
	-	T-const. for constant temperature control	T-const. for constant temperature control	-	-
	-	Constant Q for constant volume flow control	Constant Q for constant volume flow control	-	-
	-	Multi Flow Adaptation	Multi Flow Adaptation	-	-
	-	Δ T-const. for constant differential temperature control	Δ T-const. for constant differential temperature control	-	-
	-	User-defined PID control	User-defined PID control	-	-
	-	Constant speed (n-const.)	Constant speed (n-const.)	-	-
Special features of the series	-	Heating/Cooling switching	Heating/Cooling switching	-	-
	-	Night set back	Night set back	-	-
	-	Heat quantity measurement	Heat quantity measurement	-	-
	-	Cooling quantity measurement	Cooling quantity measurement	-	-
	-	Key locking function	Key locking function	-	-
	-	No-Flow Stop	No-Flow Stop	-	-
	-	Reset function to factory setting	Reset function to factory setting	-	-
	-	Adjustable volume flow limiter	Adjustable volume flow limiter	-	-
	-	Ability to save and restore configured pump settings (3 restoration points)	Ability to save and restore configured pump settings (3 restoration points)	-	-
	-	Fault message and warning message in plain text including suggested remedy	Fault message and warning message in plain text including suggested remedy	-	-
Multi pump operation	Main/Standby	Main/Standby	Main/Standby	Main/Standby	-
	-	Parallel operation	Parallel operation	-	-
Measurement value logging	-	Heat and cooling capacity measurement	Heat and cooling capacity measurement	-	-
Display	Setpoint	Setpoint	Setpoint	Setpoint	-
	-	Actual delivery head	Actual delivery head	-	-
	-	Actual volume flow	Actual volume flow	-	-
	-	Actual power consumption	Actual power consumption	-	-
	-	Energy consumption	Energy consumption	-	-
	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-
	-	Warning messages in plain text (display status: yellow)	Warning messages in plain text (display status: yellow)	-	-
	-	Error messages in plain text (display: red)	Error messages in plain text (display: red)	-	-
	-	Pump venting (display status: blue)	Pump venting (display status: blue)	-	-
	-	Control mode	Control mode	-	-
	-	Active influences (e.g. STOP)	Active influences (e.g. STOP)	-	-
Display (can also be selected)	-	Speed	Speed	-	-
	-	Heating quantity	Heating quantity	-	-
	-	Cooling quantity	Cooling quantity	-	-
	-	Operating hours	Operating hours	-	-
	-	Mains voltage	Mains voltage	-	-
	-	Warning message	Warning message	-	-
	-	Error message	Error message	-	-
Pump venting function	-	Yes	Yes	-	-
Dry-running detection	-	yes	yes	-	-
Equipment
Thermal insulation shell	-	No	No	-	-
Cold water insulation shell	-	No	No	-	-
Quick electrical connection	Wilo plug	Wilo Connector	Wilo Connector	Wilo plug	-
Blocking-current proof motor	-	yes	yes	-	-
Particle filter	-	yes	yes	-	-
Key lock	-	yes	yes	-	-
Fluid temperature sensor	-	Integrated	Integrated	-	-
Connectivity
Analogue signal as standard	-	0-10 V	0-10 V	-	-
	-	2-10 V	2-10 V	-	-
	-	4-20 mA	4-20 mA	-	-
	-	0-20 mA	0-20 mA	-	-
	-	PT1000	PT1000	-	-
Digital output	SSM/SBM (via accessories Connect module Yonos MAXO)	-	-	SSM/SBM (via accessories Connect module Yonos MAXO)	-
	-	SSM	SSM	-	-
	-	SBM	SBM	-	-
Digital input	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
	-	Ext. OFF	Ext. OFF	-	-
	-	Ext. MIN	Ext. MIN	-	-
	-	Ext. MAX	Ext. MAX	-	-
	-	MANUAL (BMS-OFF)	MANUAL (BMS-OFF)	-	-
	-	Key lock	Key lock	-	-
	-	Switchover between heating/cooling mode	Switchover between heating/cooling mode	-	-
Bus communication via additional accessories	-	BACnet MS/TP	BACnet MS/TP	-	-
	-	LON	LON	-	-
	-	Modbus RTU	Modbus RTU	-	-
	-	CANopen	CANopen	-	-
	-	PLR	PLR	-	-
	-	BACnet IP	BACnet IP	-	-
	-	Modbus TCP	Modbus TCP	-	-
Access via the Wilo-Assistant app	-	Yes	Yes	-	-
Connection for Wilo-Smart Cloud	-	Via Wilo-Smart Gateway	Via Wilo-Smart Gateway	-	-
wire data exchange and remote operation	-	Bluetooth	Bluetooth	-	-
Motor data
Phases	1	1	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	3~400 V, 50 Hz
Energy efficiency index (EEI)	≤0,23	≤0,19	≤0,17	≤0,23	-
Min current	0,15 A	0,11 A	0,2 A	0,17 A	-
Max current	1,33 A	1,42 A	2,49 A	2,4 A	-
Rated power	230 W	266 W	479 W	450 W	-
Min. speed	1000 1/min	750 1/min	650 1/min	950 1/min	-
Max. speed	4800 1/min	4400 1/min	3600 1/min	4600 1/min	-
Power consumption	10 W	7 W	10 W	15 W	-
Power consumption	305 W	320 W	570 W	550 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	F	F	-
Protection class	IPX4D	IPX4D	IPX4D	IPX4D	-
Sound-pressure level	-	-	-	-	-
Materials
Material	Grey cast iron	Grey cast iron	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PPS-GF40	PPS-GF40	PPS-GF40	-
Shaft	Stainless steel	1.4122, DLC-coated	1.4028, DLC-coated	Stainless steel	-
Bearing	Carbon, metal-impregnated	Carbon, antimony-impregnated	Carbon, antimony-impregnated	Carbon, metal-impregnated	-
Pipe connection
Inlet connection	DN 32	DN 32	DN 40	DN 40	DN 32
PN connection on suction side	PN 6/10	PN 6/10	PN 6/10	PN 6/10	PN 6/10
Outlet connection	DN 32	DN 32	DN 40	DN 40	DN 32
PN connection on discharge side	PN 6/10	PN 6/10	PN 6/10	PN 6/10	PN 6/10
Dimension, weight
Length with packaging	400 mm	800 mm	800 mm	525 mm	-
Length	220 mm	220 mm	250 mm	250 mm	-
Height with packaging	395 mm	394 mm	394 mm	375 mm	-
Height	334 mm	334 mm	381 mm	401 mm	-
Width with packaging	300 mm	600 mm	600 mm	385 mm	-
Width	251 mm	400 mm	490 mm	302 mm	-
Gross weight, approx.	18,9 kg	25,5 kg	38,8 kg	26,6 kg	-
Net weight, approx.	17,1 kg	21 kg	34,3 kg	24 kg	-
Ordering information
Product description	Yonos MAXO-D 32/0,5-11 PN 6/10	Stratos MAXO-D 32/0,5-12 PN 6/10	Stratos MAXO-D 40/0,5-12 PN 6/10	Yonos MAXO-D 40/0,5-12 PN 6/10	UPSD 32-120 F
Brand	Wilo	Wilo	Wilo	Wilo	Grundfos
EAN number	4048482274881	4048482699905	4048482699929	4048482274904	-
Article number	2120663	2164648	2164650	2120665	96408894

Data sheet

Description
Product description	UPSD 32-120 F
Brand	Grundfos
Article number	96408894
Port-to-port length l0	220 mm
Net weight, approx. m

Motor data
Phases	1
Mains connection	3~400 V, 50 Hz

Pipe connection
Inlet connection	DN 32
PN connection on suction side	PN 6/10
Outlet connection	DN 32
PN connection on discharge side	PN 6/10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.