Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Atmos GIGA-I 200/200-15/4-S1 | Wilo

Atmos GIGA-I 200/200-15/4-S1

Article number: 2220517
Technical data
Hydraulic data
Minimum efficiency index (MEI) ≥0.4
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Motor data
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Motor efficiency class IE3
Rated power P2 15 kW
Rated current IN 31 A
Rated speed n 1450 1/min
Power factor cos φ100 0.81
Motor efficiency 50% ηM 50% 90.7 %
Motor efficiency 75% ηM 75% 91.7 %
Motor efficiency 100% ηM 100% 91.7 %
Insulation class F
Protection class motor IP55
Motor protection PTC integrated
Materials
Pump housing 5.1301/EN-GJL-250 KTL-coated
Impeller Grey cast iron EN-GJL-200
Shaft Stainless steel
Mechanical seal Q1Q1X4GG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 200
Pipe connection on the discharge side DNd DN 200
Port-to-port length L0 800 mm

Atmos GIGA-I 200/200-15/4-S1

∆: Connection diagram delta connection

Y: Connection diagram star connection

Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases.

P2≤ 3 kW 3~400 V Y
  3~230 V ∆
P2≥ 4 kW 3~690 V Y
  3~400 V ∆

After removing the bridges, Y-∆ start is possible.

Product data
Brand Wilo
Product description Atmos GIGA-I 200/200-15/4-S1
Article number 2220517
EAN number 4062679235622
Colour Green
Minimum order quantity 1
Date of sales availability 2022-07-01
Packaging
Packaging type One-way pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 1600 mm
Length L 1076 mm
Height with packaging 958 mm
Height H 800 mm
Width with packaging 800 mm
Width W 522 mm
Gross weight, approx. m 380 kg
Net weight, approx. m 342 kg
Tender text

Single-stage glanded centrifugal pump with in-line design for pipe installation or installation on a base. Low-oscillation and low-noise monobloc design with lantern and rigidly connected standard flange motor. With forced-flow circulation, bidirectional bellows mechanical seal and cavitation-reducing impeller. From kW 37 with a cartridge mechanical seal in the back pull-out system for mechanical seal replacement without dismantling the motor. Flange with R 1/8 pressure measuring connections.

All grey cast iron components are cataphoretic-coated.

Pumps with motors ≥ 5.5 kW are equipped as standard with a PTC thermistor sensor for motor protection.

The motor terminal box ≤ 7.5 kW can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant. The motor terminal boxes > 7.5 kW are always made of metal.

  • Mechanical seal S1 recommended for water-glycol mixtures with glycol proportions up to max. 50 % by volume and a fluid temperature of -20 °C up to max. +90 °C ... +110 °C and also if there is oil in the water-glycol mixture.
Operating Data
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Min. ambient temperature Tmin -15 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Minimum efficiency index (MEI) ≥0.4
Motor data
Motor efficiency class IE3
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 15000 W
Rated speed n 1450 1/min
Rated current IN 31 A
Power factor cos φ100 0.81
Motor efficiency 50% ηM 50% 90.7 %
Motor efficiency 75% ηM 75% 91.7 %
Motor efficiency 100% ηM 100% 91.7 %
Insulation class F
Protection class IP55
Materials
Pump housing 5.1301/EN-GJL-250 KTL-coated
Impeller Grey cast iron
Shaft Stainless steel
Shaft seal Q1Q1X4GG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 200
Pipe connection on the discharge side DNd DN 200
Ordering information
Brand Wilo
Product description Atmos GIGA-I 200/200-15/4-S1
Net weight, approx. m 342 kg
Article number 2220517
Documents

Installation and operating instructions

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230372
Edition 2023-06
Number of pages 148
PDF (7 MB)

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230376
Edition 2023-06
Number of pages 72
PDF (7 MB)

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230371
Edition 2023-06
Number of pages 40
PDF (6 MB)

Certification booklet

Wilo-CronoLine-IL-E, Wilo-CronoTwin-DL-E, Wilo-CronoBloc-BL-E, Wilo-Atmos GIGA-I/-B, Wilo-CronoLine-IL, Wilo-CronoTwin-DL, Wilo-CronoBloc-BL

Article Number 2216677
Edition 2022-11
Number of pages 40
PDF (13 MB)
BIM/CAD
Accessory

Continuous, infinitely variable control, differential pressure-sensitive CC-HVAC system (23)

Continuous, infinitely variable control, temperature-dependent CC-HVAC system (19)

Continuous, infinitely variable control, differential pressure-sensitive SC-HVAC system (33)

Continuous, infinitely variable control, temperature-dependent SC-HVAC system (27)

Wall fixation/installation on a base (1)

Mounting bracket kit
Mounting bracket kit
Mounting bracket F 3-18 SET
    

Mounting brackets for the installation on a base of in-line and monobloc pumps. Comprised of several angle brackets (number dependent on the pump type), intended for the screwed connection with the screw-on bases or feet of the pump. The angle brackets ensure secure fastening of the pump to the foundation. Including fixation material.

Notice

The mounting brackets / angle brackets must be lined by the dimension specified for the following pump types:

  • BL 65/270-5.5/4, BL 80/250-5.5/4, BL/BL-E 80/250-7.5/4: 30 mm
  • all types BL 100/..., BL 125/220..., BL/BL-E 125/260..., BL/BL-E 125/270...: 20 mm
  • all types BL 125/190..., BL 125/200..., BL 125/250...: 40 mm

Scope of delivery

  • Screws
  • Angle brackets
  • Screw stays
  • Nuts

Pump control (1)

Pump control/accessories (31)

Pump control/Smart control system (16)

Differential pressure detection (5)

Motor protection (2)

Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Supervision
Supervision Glanded pumps
    
2219321

Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project.

Supervision includes:

  • Regular on-site visits ensure the quality of information and advice
  • Technical consultancy, also available on site
  • Status report with recommendations after the visit
  • Comprehensive support from a Wilo expert
Commissioning
Commissioning Glanded pumps
    
2219391

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (f