Magna-D 50-60 F | Wilo

Magna-D 50-60 F

Number of results: 3

Flow

Head / Pump pressure

Product design type	Glandless premium smart twin-head pump	Glandless standard high-efficiency pump	Glandless premium smart twin-head pump	Existing pump



Description
Product description	Stratos MAXO-D 50/0,5-6 PN 6/10	Yonos MAXO-D 50/0,5-9 PN 6/10	Stratos MAXO-D 50/0,5-9 PN 6/10	Magna-D 50-60 F
Article number	2164652	2120667	2164654	96748677
Series	Wilo-Stratos MAXO-D	Wilo-Yonos MAXO-D	Wilo-Stratos MAXO-D	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length	-	-	-	280 mm
Pump connection	DN 50	DN 50	DN 50	-
Display	Graphic colour display (4.3 inches)	LED segment display	Graphic colour display (4.3 inches)	-
Comment	Works with other accessories without the need to change any piping	Fits without modifications	Fits without modifications	-
Fitting piece (PN6)	2 x 110623098 Intermediate flange pieces F 3, DN 50x20mm, PN 6	-	-	-
Fitting piece (PN10/16)	2 x 110623190 Intermediate flange pieces F 3, DN 50x20mm, PN 10/16	-	-	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	Q limit for limiting the maximum volume flow	-
	Dynamic Adapt plus	-	Dynamic Adapt plus	-
	ΔT-const. for constant differential temperature control	-	ΔT-const. for constant differential temperature control	-
	T-const. for constant temperature control	-	T-const. for constant temperature control	-
	Constant Q for constant volume flow control	-	Constant Q for constant volume flow control	-
	Multi Flow Adaptation	-	Multi Flow Adaptation	-
	Δ T-const. for constant differential temperature control	-	Δ T-const. for constant differential temperature control	-
	User-defined PID control	-	User-defined PID control	-
	Constant speed (n-const.)	-	Constant speed (n-const.)	-
	-	Constant speed (3 speed stages)	-	-
Special features of the series	Heating/Cooling switching	-	Heating/Cooling switching	-
	Night set back	-	Night set back	-
	Heat quantity measurement	-	Heat quantity measurement	-
	Cooling quantity measurement	-	Cooling quantity measurement	-
	Key locking function	-	Key locking function	-
	No-Flow Stop	-	No-Flow Stop	-
	Reset function to factory setting	-	Reset function to factory setting	-
	Adjustable volume flow limiter	-	Adjustable volume flow limiter	-
	Ability to save and restore configured pump settings (3 restoration points)	-	Ability to save and restore configured pump settings (3 restoration points)	-
	Fault message and warning message in plain text including suggested remedy	-	Fault message and warning message in plain text including suggested remedy	-
Multi pump operation	Main/Standby	Main/Standby	Main/Standby	-
	Parallel operation	-	Parallel operation	-
Measurement value logging	Heat and cooling capacity measurement	-	Heat and cooling capacity measurement	-
Display	Setpoint	Setpoint	Setpoint	-
	Actual delivery head	-	Actual delivery head	-
	Actual volume flow	-	Actual volume flow	-
	Actual power consumption	-	Actual power consumption	-
	Energy consumption	-	Energy consumption	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-
	Warning messages in plain text (display status: yellow)	-	Warning messages in plain text (display status: yellow)	-
	Error messages in plain text (display: red)	-	Error messages in plain text (display: red)	-
	Pump venting (display status: blue)	-	Pump venting (display status: blue)	-
	Control mode	-	Control mode	-
	Active influences (e.g. STOP)	-	Active influences (e.g. STOP)	-
Display (can also be selected)	Speed	-	Speed	-
	Heating quantity	-	Heating quantity	-
	Cooling quantity	-	Cooling quantity	-
	Operating hours	-	Operating hours	-
	Mains voltage	-	Mains voltage	-
	Warning message	-	Warning message	-
	Error message	-	Error message	-
Pump venting function	Yes	-	Yes	-
Dry-running detection	yes	-	yes	-
Equipment
Thermal insulation shell	No	-	No	-
Cold water insulation shell	No	-	No	-
Quick electrical connection	Wilo Connector	Wilo plug	Wilo Connector	-
Blocking-current proof motor	yes	-	yes	-
Particle filter	yes	-	yes	-
Key lock	yes	-	yes	-
Fluid temperature sensor	Integrated	-	Integrated	-
Connectivity
Analogue signal as standard	0-10 V	-	0-10 V	-
	2-10 V	-	2-10 V	-
	4-20 mA	-	4-20 mA	-
	0-20 mA	-	0-20 mA	-
	PT1000	-	PT1000	-
Digital output	SSM	-	SSM	-
	SBM	-	SBM	-
	-	SSM/SBM (via accessories Connect module Yonos MAXO)	-	-
Digital input	Ext. OFF	-	Ext. OFF	-
	Ext. MIN	-	Ext. MIN	-
	Ext. MAX	-	Ext. MAX	-
	MANUAL (BMS-OFF)	-	MANUAL (BMS-OFF)	-
	Key lock	-	Key lock	-
	Switchover between heating/cooling mode	-	Switchover between heating/cooling mode	-
	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	-
Bus communication via additional accessories	BACnet MS/TP	-	BACnet MS/TP	-
	LON	-	LON	-
	Modbus RTU	-	Modbus RTU	-
	CANopen	-	CANopen	-
	PLR	-	PLR	-
	BACnet IP	-	BACnet IP	-
	Modbus TCP	-	Modbus TCP	-
Access via the Wilo-Assistant app	Yes	-	Yes	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	Via Wilo-Smart Gateway	-
wire data exchange and remote operation	Bluetooth	-	Bluetooth	-
Motor data
Phases	1	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50 Hz
Energy efficiency index (EEI)	≤0,18	≤0,23	≤0,17	-
Min current	0,11 A	0,17 A	0,2 A	-
Max current	1,17 A	2,15 A	2,4 A	-
Rated power	216 W	400 W	456 W	-
Min. speed	750 1/min	950 1/min	650 1/min	-
Max. speed	3150 1/min	4100 1/min	3050 1/min	-
Power consumption	7 W	15 W	10 W	-
Power consumption	270 W	490 W	550 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	F	-
Protection class	IPX4D	IPX4D	IPX4D	-
Sound-pressure level	-	-	-	-
Materials
Material	Grey cast iron	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PPS-GF40	PPS-GF40	-
Shaft	1.4028, DLC-coated	Stainless steel	1.4028, DLC-coated	-
Bearing	Carbon, antimony-impregnated	Carbon, metal-impregnated	Carbon, antimony-impregnated	-
Pipe connection
Inlet connection	DN 50	DN 50	DN 50	DN 50
PN connection on suction side	PN 6/10	PN 6/10	PN 6/10	PN 6/10
Outlet connection	DN 50	DN 50	DN 50	DN 50
PN connection on discharge side	PN 6/10	PN 6/10	PN 6/10	PN 6/10
Dimension, weight
Length with packaging	800 mm	525 mm	800 mm	-
Length	240 mm	280 mm	280 mm	-
Height with packaging	394 mm	375 mm	394 mm	-
Height	351 mm	413 mm	404 mm	-
Width with packaging	600 mm	385 mm	600 mm	-
Width	420 mm	310 mm	490 mm	-
Gross weight, approx.	30,5 kg	28,9 kg	41,1 kg	-
Net weight, approx.	26 kg	26,4 kg	36,6 kg	-
Ordering information
Product description	Stratos MAXO-D 50/0,5-6 PN 6/10	Yonos MAXO-D 50/0,5-9 PN 6/10	Stratos MAXO-D 50/0,5-9 PN 6/10	Magna-D 50-60 F
Brand	Wilo	Wilo	Wilo	Grundfos
EAN number	4048482699943	4048482274911	4048482699967	-
Article number	2164652	2120667	2164654	96748677

Data sheet

Description
Product description	Magna-D 50-60 F
Brand	Grundfos
Article number	96748677
Port-to-port length l0	280 mm

Motor data
Phases	1
Mains connection	1~230 V, 50 Hz

Pipe connection
Inlet connection	DN 50
PN connection on suction side	PN 6/10
Outlet connection	DN 50
PN connection on discharge side	PN 6/10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.