Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
WEV-2-308-T/CE-2D | Wilo

WEV-2-308-T/CE-2D

Article number: 4157278
Technical data
Technical data
Activation type Direct On Line (DOL)
Number of pumps 2
Connection standard DIN EN 10226-1
Control Without frequency converter
Diaphragm pressure vessel no
Drinking water and water for food-processing companies in accordance with TrinkwV 2001 (drinking water ordinance) no
Phases 3
Electromagnetic compatibility EN 61000
Flow rate Q 4 m³/h
Heating water (as per VDI 2035) yes
Max. inlet pressure 10 bar
Installation Base frame installation
Insulation class F
Mains frequency f 50 Hz
Motor protection no
Rated power P2 1500 W
No. of poles 2
Number of stages -
Rated speed n 2900 1/min
Rated voltage U 400 V
Voltage tolerance ±10 %
Mains connection 3~400 V, 50 Hz
Dimensions
Dimensions L 800.0 mm
Dimensions H 1150.0 mm
Dimensions H1 100.0 mm
Dimensions P 510.0 mm
Product data
Brand Wilo
Product description WEV-2-308-T/CE-2D
Article number 4157278
EAN number 4048482174525
Colour Green/black/silver
Minimum order quantity 1
Date of sales availability 2015-03-01
Packaging
Packaging type Special pallet
Packaging property Sales packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 1200 mm
Length L 800 mm
Height with packaging 1285 mm
Height H 1150 mm
Width with packaging 800 mm
Width W 510 mm
Gross weight, approx. m 116 kg
Net weight, approx. m 100 kg
Tender text

Compact pressure-maintaining system delivered as unit ready for connection, enabling easy installation and commissioning. System consisting of mechanical and hydraulic components as well as control units: Pumps, PPH container, collective pipework and the corresponding equipment, such as: stop valves, connection pipes, 2 overpressure valves, cartridge filters and non-return valves, venting unit for mechanical seal of the pumps, pressure sensors, switchgear for the pumps. The connection between pumps and container, the pressure side and the system provided by the customer and the electrical power supply must still be made.

Wilo-WEV is used to ensure constant and stable pressure in the system. Upon expansion, the fluid is collected in the container and upon contraction it is returned to fill the system.

For installation in commercial properties (office buildings, hotels, hospitals, shopping centres, schools,...) and heating and air conditioning systems for district heating.

Components:

Switchgear/control device

Fully-electronic central control unit

  • Plastic housing with protection class IP 54, with main switch
  • Individual run signals and fault signals
  • Configurable parameters for setting the pressure
  • With function for filling the pumps

Pumps

The MVIL-series multistage pumps provide the currently required volume flow and pressure in order to maintain stable pressure at the required level in the system. They can also be used in hot water heating systems, cooling and cold water cycles as well as in industrial circulation systems. For the vertical versions with the MVIL pumps, it is possible to vent the mechanical seal on an ongoing basis.

Tank

The container is available in sizes 200 l - 5000 l and is made of polypropylene homopolymer with excellent resistance to corrosion. All required connections are prepared. A solenoid valve for filling the container is attached to the container. Furthermore, a level float switch and a float switch for low-water monitoring is attached to the container. A cover with a handle is attached to the top of the container.

Joint tubings

Two collective pipeworks are installed, one each on the pressure and suction side. Two overpressure valves are installed between the collective pipeworks. If the pressure of the fluid increases due to expansion, the overpressure valves open to allow the fluid to flow from the system back into the container. A stop valve and a filter cartridge are installed on the suction side. A non-return valve and a stop valve are installed on the pressure side. A pressure sensor is installed for monitoring of the system pressure. If the system pressure falls, the sensor recognises this and starts the pump in order to pump the fluid from the container back into the system, increasing the pressure to its setpoint.

Technical data
Height H 1150 mm
Length L 800 mm
Net weight, approx. 100 kg
Width W 510 mm
Documents

Installation and operating instructions

Wilo-EC-HVAC

Article Number 4255848
Edition 2023-03
Number of pages 44
PDF (6 MB)

Wilo-Control CE+ WEH/WEV

Article Number 4163847
Edition 2011-09
Number of pages 22
PDF (997 KB)
BIM/CAD

3D_DWG

4157278, WEV-2-308-T/CE-2D

DWG (4 MB)

3D_STEP

4157278, WEV-2-308-T/CE-2D

STP (4 MB)

2D_DWG_TOP

4157278, WEV-2-308-T/CE-2D

DWG (104 KB)

2D_DWG_FRONT

4157278, WEV-2-308-T/CE-2D

DWG (64 KB)

2D_DWG_RIGHT

4157278, WEV-2-308-T/CE-2D

DWG (56 KB)