Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Atmos GIGA-I 32/130-3/2/6 | Wilo

Atmos GIGA-I 32/130-3/2/6

Article number: 2226421
Technical data
Hydraulic data
Minimum efficiency index (MEI) ≥0.4
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Motor data
Mains connection 3~380 V, 60 Hz
Voltage tolerance ±10 %
Motor efficiency class IE3
Rated power P2 3 kW
Rated current IN 10.2 A
Rated speed n 2900 1/min
Power factor cos φ100 0.88
Motor efficiency 50% ηM 50% 85 %
Motor efficiency 75% ηM 75% 87.7 %
Motor efficiency 100% ηM 100% 88.5 %
Insulation class F
Protection class motor IP55
Motor protection no
Materials
Pump housing 5.1301/EN-GJL-250 KTL-coated
Impeller Grey cast iron EN-GJL-200
Shaft Stainless steel
Mechanical seal AQ1EGG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 32
Pipe connection on the discharge side DNd DN 32
Port-to-port length L0 320 mm

Atmos GIGA-I 32/130-3/2/6

60 Hz

∆: Connection diagram delta connection Y: Connection diagram star connection Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases. P2≥ 4 kW 3~660 V Y 3~380 V ∆ After removing the bridges, Y-∆ start is possible.

Product data
Brand Wilo
Product description Atmos GIGA-I 32/130-3/2/6
Article number 2226421
EAN number 4062679282831
Colour Green
Minimum order quantity 1
Date of sales availability 2022-12-01
Packaging
Packaging type Cardboard box
Packaging property Transport packaging
Pieces per pallet 4
Number per layer 2
Dimension, weight
Length with packaging 800 mm
Length L 586 mm
Height with packaging 525 mm
Height H 335 mm
Width with packaging 600 mm
Width W 250 mm
Gross weight, approx. m 77 kg
Net weight, approx. m 71 kg
Tender text

Single-stage glanded centrifugal pump with in-line design for pipe installation or installation on a base. Low-oscillation and low-noise monobloc design with lantern and rigidly connected standard flange motor. With forced-flow circulation, bidirectional bellows mechanical seal and cavitation-reducing impeller. From kW 37 with a cartridge mechanical seal in the back pull-out system for mechanical seal replacement without dismantling the motor. Flange with R 1/8 pressure measuring connections.

All grey cast iron components are cataphoretic-coated.

Pumps with motors ≥ 5.5 kW are equipped as standard with a PTC thermistor sensor for motor protection.

The motor terminal box ≤ 7.5 kW can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant. The motor terminal boxes > 7.5 kW are always made of metal.

  • Mechanical seal for pumping water up to Tmax = +140 °C. Up to T ≤ +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
Operating Data
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Min. ambient temperature Tmin -15 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Minimum efficiency index (MEI) ≥0.4
Motor data
Motor efficiency class IE3
Mains connection 3~380 V, 60 Hz
Voltage tolerance ±10 %
Rated power P2 3000 W
Rated speed n 2900 1/min
Rated current IN 10.2 A
Power factor cos φ100 0.88
Motor efficiency 50% ηM 50% 85 %
Motor efficiency 75% ηM 75% 87.7 %
Motor efficiency 100% ηM 100% 88.5 %
Insulation class F
Protection class IP55
Materials
Pump housing 5.1301/EN-GJL-250 KTL-coated
Impeller Grey cast iron
Shaft Stainless steel
Shaft seal AQ1EGG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 32
Pipe connection on the discharge side DNd DN 32
Ordering information
Brand Wilo
Product description Atmos GIGA-I 32/130-3/2/6
Net weight, approx. m 71 kg
Article number 2226421
Documents

Installation and operating instructions

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230372
Edition 2023-06
Number of pages 148
Language de, en, fr, nl
PDF (7 MB)

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230376
Edition 2023-06
Number of pages 72
Language en, zh
PDF (7 MB)

Wilo-Atmos GIGA-I/-D/-B

Article Number 2230371
Edition 2023-06
Number of pages 40
Language en
PDF (6 MB)
BIM/CAD
Accessory

Continuous, infinitely variable control, differential pressure-sensitive CC-HVAC system (26)

Continuous, infinitely variable control, temperature-dependent CC-HVAC system (22)

Continuous, infinitely variable control, differential pressure-sensitive SC-HVAC system (33)

Continuous, infinitely variable control, temperature-dependent SC-HVAC system (27)

Wall fixation/installation on a base (1)

Mounting bracket kit
Mounting bracket kit
Mounting bracket F 3-14 SET
    

Mounting brackets for the installation on a base of in-line and monobloc pumps. Comprised of several angle brackets (number dependent on the pump type), intended for the screwed connection with the screw-on bases or feet of the pump. The angle brackets ensure secure fastening of the pump to the foundation. Including fixation material.

Notice

The mounting brackets / angle brackets must be lined by the dimension specified for the following pump types:

  • BL 65/270-5.5/4, BL 80/250-5.5/4, BL/BL-E 80/250-7.5/4: 30 mm
  • all types BL 100/..., BL 125/220..., BL/BL-E 125/260..., BL/BL-E 125/270...: 20 mm
  • all types BL 125/190..., BL 125/200..., BL 125/250...: 40 mm

Scope of delivery

  • Screws
  • Angle brackets
  • Screw stays
  • Nuts

Pump control (1)

Pump control/accessories (29)

Pump control/Comfort control system (3)

Pump control/Smart control system (16)