Wilo-Xiro SPI
Ventajas
- Long service life due to corrosion-resistant hydraulics made of stainless steel
- Universally applicable due to a high performance range
- Easy installation with integrated non-return valve
- Easy to maintain and repair due to rewindable motors
Servicios recomendados
Tipo
Multistage stainless steel submersible pump in strapped construction for vertical and horizontal installation
Aplicación
- For process water supply from boreholes and rainwater storage tanks
- For sprinkling and irrigation
- Lowering of the water level
- For pumping water without long-fibre and abrasive constituents
Equipo/función
- Multistage hydraulics with radial or semi-axial impellers
- Integrated non-return valve
- NEMA coupling for 6" and 8" hydraulics
- Rewindable, three-phase motor
Designación
Example: | Xiro SPI 6.30-09-A1-13 |
SPI | Submersible pump made of stainless steel |
6 | Diameter of the hydraulic unit in inches ["] |
30 | Rated volume flow at optimum efficiency in m3/h |
09 | Number of hydraulic stages |
A1 | Technical key figures for hydraulics |
13 | Required rated motor power P2 in kW |
Datos técnicos
- Mains connection: 3~380 V, 60 Hz
- Submerged operating mode: S1
- Fluid temperature: 37…86 °F (3…30 °C)
- Minimum flow rate at motor: 8 or 20 in/s (0.2 or 0.5 m/s) (depending on performance)
- Max. sand content: 0.08 lb/yd³ (50 g/m3)
- Max. number of starts: 10 or 20/h (depending on performance)
- Max. immersion depth: 656 ft (200 m)
- Protection class: IP68
- Pressure connection: Rp 2½ to Rp 6
Materiales
- Hydraulic housing: Stainless steel AISI 304L (1.4307)
- Impellers: Stainless steel AISI 304L (1.4307)
- Hydraulic shaft: Stainless steel AISI 420 (1.4021)
- Motor housing: Stainless steel AISI 304 (1.4301)
- Motor shaft: Stainless steel AISI 304 (1.4301)
Diseño
Hydraulics
Multistage submersible pump for vertical or horizontal construction with NEMA (6" and 8") or standard connection (10"). Radial or semi-axial impellers in sectional construction, integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.
Motor
Rewindable three-phase motor for direct starting with PVC-isolated winding and a water-glycol filling. Hydraulic connection as NEMA (6" and 8") or standard connection (10"). Sealing of motor shaft with a mechanical seal made of carbon/ceramic material. Self-lubricating motor bearing. Thrust bearing with rockers for absorption of high axial thrust. Negative axial thrust is absorbed by the rotating seal bearing.
The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.
Suministro
- Hydraulics and motor packaged separately, installation on-site
- Motor with 4.3 m connection cable
- Installation and operating instructions
Opciones
- Hydraulics and motor pre-assembled
- Hydraulics in stainless steel 1.4401
- Motor in EN-GJL or stainless steel 1.4401
- Motor monitoring with Pt100 sensor
- Motors with star-delta activation
- Unit built in pressure shroud
Conjunto de certificaciones
Wilo-Xiro SPI/SPC 6''-10'' without motor
| Referencia | 6084897 |
| Edición | 2020-11 |
| Número de páginas | 20 |
| Idioma | lengua neutra |
PDF (2 MB)Group Statement
Reglamento REACH
| Edición | 2021-05 |
| Número de páginas | 5 |
| Idioma | lengua neutra |
PDF (271 KB)