Wilo-Sub TWI 5/TWI 5-SE
Your advantages
- Highly efficient thanks to optimised hydraulics
- Self-cooling motor (dry installation out of the water is possible)
- Single-phase current version, pre-assembled with switchbox and motor protection for an easy installation
- Easy handling, maintenance and repair
- Corrosion-resistant and low-wearing
Design
Multistage, submersible, rainwater storage tank pump
Application
Designed for pumping drinking water (in accordance with ACS) and rainwater with up to 50 g/m³ sand content from wells and rainwater storage tanks for irrigation, sprinkling and water supply.
Equipment/function
TWI5 ... EM:
- For wet installation in tanks and rainwater storage tanks
- With suction strainer
- Single-phase current motor with thermal motor protection and 20 m of connection cable
- Switch box (IP55) with on/off switch, 2 m connection cable and CEE7/7 plug
- The switch box is ready for connecting a float switch.
TWI5 ... EM-FS:
- For wet installation in tanks and rainwater storage tanks
- With suction strainer and fitted float switch
- Single-phase current motor with thermal motor protection and 20 m of connection cable
- Switch box (IP55) with on/off switch, 2 m connection cable and CEE7/7 plug
- The switch box is ready for connecting a float switch.
TWI5 SE ... EM:
- For wet installation in tanks and rainwater storage tanks and for dry installation outside tanks and rainwater storage tanks
- With side inlet (SE) for connecting a floating filter
- With pedestal (including 4 vibration absorbers) for floor installation
- Single-phase current motor with thermal motor protection and 20 m of connection cable
- Switch box (IP55) with on/off switch, 2 m connection cable and CEE7/7 plug
- The switch box is ready for connecting a float switch.
TWI5 SE ... EM-FS:
- For wet installation in tanks and rainwater storage tanks and for dry installation outside tanks and rainwater storage tanks
- With side inlet (SE) for connecting a floating filter
- With pedestal (including 4 vibration absorbers) for floor installation
- With attached float switch
- Single-phase current motor with thermal motor protection and 20 m of connection cable
- Switch box (IP55) with on/off switch, 2 m connection cable and CEE7/7 plug
- The switch box is ready for connecting a float switch.
TWI5 ... DM:
- For wet installation in tanks and rainwater storage tanks
- With suction strainer
- Three-phase current motor
- Connection cable with bare cable end
TWI5 SE ... DM:
- For wet installation in tanks and rainwater storage tanks and for dry installation outside tanks and rainwater storage tanks
- With side inlet (SE) for connecting a floating filter
- With pedestal (including 4 vibration absorbers) for floor installation
- Three-phase current motor
- Connection cable with bare cable end
Typekey
Example: | TWI5-SE 304 EM-FS |
TWI5 | Submersible rainwater storage tank pump |
SE | Version with side suction port |
3 | Rated volume flow Q in m³/h |
04 | Number of stages |
EM | Mains connection:
|
FS | Version with attached float switch |
Technical data
- Mains connection: 1~230 V, 50 Hz and 3~400 V, 50 Hz
- Fluid temperature: 5 °C to 35 °C
- Max. operating pressure: 10 bar
- Max. sand content: 50 g/m3
- Max. immersion depth: 20 m
- IP rating: IP68
- Connection on the discharge side: Rp 1¼
- Connection on the suction side (SE version): Rp 1¼
Materials
- Housing: 1.4301
- Impeller: 1.4301
- Shaft: 1.4301
- Seal:
- On the fluid side: SIC/SIC
- On the motor side: Carbon/ceramic
- Static: NBR
Construction
Rainwater storage tank pump in monobloc design with radial impeller as multistage hydraulics.
Single-phase current motor with sheath flow cooling. The motor is cooled by the pumped fluid. The motor is equipped with automatic thermal motor monitoring.
The motor itself is dry. Two mechanical seals are used to seal the motor and the fluid. There is an oil separation chamber between the two mechanical seals. The oil separation chamber is filled with white oil and absorbs leakage through the seal on the fluid side.
Connection cable with fitted plug.
Scope of delivery
TWI5 ... EM ...
- Pump with 20 m connection cable, switch box with 2 m connection cable and CEE7/7 plug
- Safety rope
- Installation and operating instructions
TWI5 ... DM ...
- Pump with 20 m connection cable
- Safety rope
- Installation and operating instructions
Accessories
- Gate valve
- Non-return valve
- Float switch
- Pressure switch
- Electrodes
- Switchgears
- Alarm switchgears
- Suction filter with floater:
- Coarse filter
- Fine filter
Installation and operating instructions
Wilo-TWI 5, Wilo-TWI 5-SE
| Article Number | 4104146 |
| Edition | 2017-03 |
| Number of pages | 152 |
| Language | cs, da, de, el, en, es, fr, it, lt, nl, pt, ru, sv, tr |
PDF (2 MB)Wilo-TWI 5, Wilo-TWI 5-SE
| Article Number | 4104146 |
| Edition | 1304 |
| Number of pages | 14 |
| Language | en |
PDF (699 KB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (271 KB)CE
CE 2216020-02
| Number of pages | 6 |
| Language | language neutral |
PDF (278 KB)CE 2109704-06
| Number of pages | 6 |
| Language | language neutral |
PDF (291 KB)