Wilo-SiBoost PC Helix2.0 VE
Optimal pressure boosting. Intuitive operation.
Optimal pressure boosting. Intuitive operation.
The SiBoost PC Helix2.0 VE provides reliable water supply in large buildings at all times with integrated protection functions. These include overload protection, dry-running protection and low-water cut-out switchgear with automatic deactivation. The optional interface to the SCADA connection also enables monitoring and leakage detection.
Furthermore, significant energy savings are achieved through pressure-loss optimised hydraulics as well as optimal load adjustment.
The Green Button Technology with colour display provides optimal operating convenience by displaying visualisations and plain text.
Ειδικά χαρακτηριστικά/πλεονεκτήματα προϊόντος
- Heavy-duty system featuring stainless steel high-pressure multistage centrifugal pumps from the Helix2.0 VE series with an integrated frequency converter with a large control range
- Energy savings through IE5 EC motor technology and pressure-loss optimised overall system
- Adjustment of the setpoint, operating parameters and acknowledgement of the fault messages thanks to Green Button Technology
- High-resolution graphics display with green button and 2 keys for displaying the operating data, the controller parameters, the operating status of the pumps, the actual pressure, the error messages and the history log
- Demand-led pressure boosting with the additional control mode p-v and parallel synchronous speed control
- Integrated protection functions and low-water detection (WMS)
- Ready for integration into building automation via standard Modbus, BACnet and optional extended communication via Wilo-Gateway
- All components that come in contact with the fluid are suitable for drinking water REG4 approved
Φιλικές προς το περιβάλλον ιδιότητες
- High-efficiency pump system with IE5 EC motor
- Energy saving thanks to synchronous operation of the pumps and variable pressure control mode
- Durable stainless steel pump material for a long service life
- Modular design with low variance of easily replaceable components for extended product life
Σχεδιασμός
Highly efficient water-supply unit ready for connection, with 2 to 3 vertically arranged, stainless steel, high-pressure multistage centrifugal pumps that are connected in parallel and non-self-priming from the Helix2.0 VE series; every pump is equipped with an integrated air-cooled frequency converter. Adjustment of the setpoint, operating parameters and acknowledgement of the fault messages thanks to Green Button Technology.
Χρήση
- Fully automatic water supply in inlet mode, in the field of public water supply, for pressure boosting from tanks or pressure pipes, for municipal, commercial, industrial and domestic applications (e.g. water supply companies, trade and industrial companies, residential, office or public facilities, administration buildings, hotels, hospitals).
- Standby pump included according to DIN 1988 and DIN EN 806.
- Approved fluid is water which does not corrode the materials used, neither chemically nor mechanically, and does not contain any abrasive or long-fibre constituents.
Εξοπλισμός/λειτουργία
- 2-3 pumps per system from the Helix2.0 VE 2 to Helix2.0 VE 16 series, with IE5 EC motor drive and speed control via integrated frequency converter on each pump.
- Complete assembly mounted on galvanised steel, height-adjustable base frame.
- All components that come in contact with the fluid are corrosion-resistant.
on the discharge side:
- Shut-off valve
- Non-return valve
- Check valve at each pump
- Diaphragm expansion tank 8 l, PN 16
- 2 pressure sensors 4 to 20 mA
- Pressure gauge
- Threaded cap or blind flange depending on the nominal diameter of the manifold
on the suction side:
- Shut-off valve
- 2 pressure sensors 4 to 20 mA
- Low water switch
- Threaded cap or blind flange depending on the nominal diameter of the manifold
Κωδικοποίηση τύπου
Example: | Wilo-SiBoost2.0 Smart 4Helix VE606 |
SiBoost | System for pressure boosting in the commercial area |
PC | Pump Controlled system with integrated frequency converters |
3 | Number of pumps |
Helix2.0 VE | Helix2.0 VE pump series |
6 | Rated volume flow [m³/h] of the single pump |
06 | Number of single pump stages |
Tεχνικά στοιχεία
- Mains connection: 3~400 ±10%, 50 Hz; 3~380 ±10%, 60 Hz
- Max. fluid temperature: +50 °C (+70 °C optional)
- Max. ambient temperature: +40 °C
- Operating pressure: 16 bar (25 bar optional)
- Inlet pressure: 10 bar
- Nominal connection diameters:
- On the end discharge side R 1½″ – DN 100
- On the inlet side R 1½″ – DN 100
- Speed range: 1500 – 3500 (3600?) rpm
- IP rating: IP54
- Fuse on mains side: A, AC 3 according to motor power and EVU regulations
Υλικά
- Pump housing made of 1.4301 [AISI 304]
- Hydraulics made of 1.4307 [AISI 304L]
- EPDM gasket
- without cartridge
Other pump versions available on request:
- with cartridge
- PN 25
- FKM (Viton) gasket
- Pump housing made of stainless steel and hydraulics made of 1.4404 [AISI 316L]
Σχεδιασμός
Base frame: Galvanised steel, with height-adjustable vibration absorbers for comprehensive insulation against structure-borne noise as well as integrated lifting points and cable guides.
Pipework: Entire pipework made of stainless steel; suitable for the connection of conventional pipe materials. The pipework is designed pursuant to the overall hydraulic performance of the pressure-boosting system.
Pumps: 2 to 3 pumps from the series Helix2.0 VE 2 to Helix2.0 VE 16 connected in parallel are used. The air-cooled frequency converters mounted on the pump motor enable continuous control between 25 Hz and a maximum of 60 Hz for all pumps of this series.
All pump parts in contact with liquids are made of stainless steel with REG4 (KIWA/WRAS/KTW/ACS) approval.
Valves: Each pump is fitted on the suction and discharge side with a standard-equipped shut-off valve and on the discharge side with a DVGW/KTW approved non-return valve.
Diaphragm pressure vessel: 8 l/PN 16 arranged on the end pressure side with a diaphragm made of butyl rubber, with DVGW/KTW approval, completely safe in accordance with food safety laws; shut-off ball valve attached for testing and inspection purposes with drain and throughflow fitting with DVGW/KTW approval according to DIN 4807.
Pressure monitoring: 4 pressure sensors: 4 to 20 mA, 2 arranged on the discharge side and 2 on the suction side.
Pressure indication: Pressure gauges arranged on the pressure side.
Available in other versions on request.
Περιεχόμενο παράδοσης
- Factory-mounted, ready-for-connection pressure-boosting system checked for functionality and impermeability
- Installation and operating instructions
- Factory test protocol
Group Statement
Κανονισμός REACH
| Έκδοση | 2021-05 |
| Αριθμός σελίδων | 5 |
| Γλώσσα | ανεξάρτητο γλώσσας |
PDF (271 KB)