P160-TS

The Wilo Comfort Twin System pressurisation units are designed for use on heating or chilled water systems and include 1 pump per system, each pump capable of up to and including 3.5, 6.0 and 8.0 bar cold fill pressures.

The unit is fitted with an 18 litre polypropylene break tank c/w type AB air gap to BS13077:2008 and water regulations 1999, Wras approved equilibrium ball float valve to BS1212 and a low water float switch and strainers for pump protection.

Each pump is fitted with a non return valve and quick release couplings for ease of maintenance. The two pressure transducers monitor each system pressure individually and feed 0-10v signals to the comfort controller.

Comfort Controller is complete with the following features:

• User friendly interface that has a 2 line LCD backlight display
• Healthy / fail LED
• Password protection
• System Fill for initial fill of system
• Pump check routine, that runs both pumps for 2 seconds if inactive for 7-90 days
• Pump trip and fail alarms
• System leak alarm
• Excessive starts alarm
• Alarm log
• Hours Run
• Connectivity: BACnet = RS485 interface, BACnet MS/TP protocol

2 wire BACnet

Volt Free Contacts are supplied with terminals for common, normally open and normally closed.

(5A, 230V)

Pump no.1 trip, Pump no. 1 run, High Pressure, Low Pressure, Excess starts, Low water and Boiler Interlock (NC only)

(10A, 230V)

To be selected from Power fail, Common alarm, Common pressure alarm

Standards Applied:

Low Voltage and Machinery Directive 2006/42/EC, EMC Directive EMC 2004/108/EC, BSEN809, BS7074-1 to 3, BS13077:2008 and water regulations 1999.