DrainLift SANI-L.16T/1
Article number : 2549910
Number of results: 1
| Product design type | Sewage lifting unit; Double-pump system | Existing pump |
| Description | ||
| Product description | DrainLift SANI-L.16/T540/1-CEE | DrainLift SANI-L.16T/1 |
| Article number | 6098846 | 2549910 |
| Series | Wilo-DrainLift SANI-L | - |
| Mains connection | 3~400 V ±10%, 50 Hz | 3~400 V ±10%, 50 Hz |
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 4 bar |
| Max. permissible pressure in the pressure pipe P | 1,5 bar |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Max. fluid temperature, for short periods up to 5 min. T | 65 °C |
| Sound-pressure level | 70 dB |
| Gross volume of the tank V | 122 l |
| Switching volume V | 60 l |
| Useable volume at 180 mm inlet height V | 60 l |
| Useable volume at 250 mm inlet height V | 76 l |
| Useable volume at 315 mm inlet height V | 91 l |
| Macerator | no |
| Free ball passage of the hydraulics | 44 mm |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Rated current IN | 4,35 A |
| Protection class | IP68 |
| Phase | 3 |
| Rated speed n | 2808 1/min |
| Number of poles | 2 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 60 1/h |
| Power consumption P1(Q=max.) of selected impeller * number of pumps P1 | 2100 W |
| Operating mode per pump | S3-10% |
| Insulation class | F |
| Motor protection | Bimetall |
| Cable | |
|---|---|
| Connection cable length L | 4 m |
| Cable type | H07RN-F |
| Cable cross-section | 6G1 mm² |
| Mains plug | CEE 16A, 3P+N+PE, 6h |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | PP-GF30 |
| Impeller | PP-GF30 |
| Shaft | Stainless steel |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Diagonal dimension Diagonal axis | 965 mm |
| Pipe connection on the suction side | DN/OD 110 (HT pipe) |
| Pipe connection on the discharge side | DN 80 |
| Connection venting | DN/OD 75 (HT pipe) |
| Connection for drainage pipe | DN/OD 50 (HT pipe) |
Installation and operating instructions
Certification booklet
2D_DWG_TOP
Take advantage of the latest replacement guide
The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.
After entering your old pump data, select the current pump type.