NZBZ 78-3 PN6 | Wilo

NZBZ 78-3 PN6

Number of results: 3

Flow

Head / Pump pressure

Product design type	Glandless premium smart-pump	Glandless premium smart twin-head pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos MAXO 80/0,5-12 PN6	Stratos MAXO-D 80/0,5-12 PN 6	Yonos MAXO-D 80/0,5-12 PN 6	NZBZ 78-3 PN6
Article number	2164598	2164662	2120672	-
Series	Wilo-Stratos MAXO	Wilo-Stratos MAXO-D	Wilo-Yonos MAXO-D	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-	-
Port-to-port length	360 mm	360 mm	-	370 mm
Pump connection	DN 80	DN 80	-	-
Display	Graphic colour display (4.3 inches)	Graphic colour display (4.3 inches)	LED segment display	-
Comment	Works with other accessories without the need to change any piping Check electrical connection	Works with other accessories without the need to change any piping Check electrical connection	Works with other accessories without the need to change any piping Check electrical connection	-
Fitting piece (PN6)	1 x 110788099 Intermediate flange pieces F 16, DN 80x10mm, PN 6	1 x 110788099 Intermediate flange pieces F 16, DN 80x10mm, PN 6	1 x 110788099 Intermediate flange pieces F 16, DN 80x10mm, PN 6	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	Q limit for limiting the maximum volume flow	-	-
	Dynamic Adapt plus	Dynamic Adapt plus	-	-
	ΔT-const. for constant differential temperature control	ΔT-const. for constant differential temperature control	-	-
	T-const. for constant temperature control	T-const. for constant temperature control	-	-
	Constant Q for constant volume flow control	Constant Q for constant volume flow control	-	-
	Multi Flow Adaptation	Multi Flow Adaptation	-	-
	Δ T-const. for constant differential temperature control	Δ T-const. for constant differential temperature control	-	-
	User-defined PID control	User-defined PID control	-	-
	Constant speed (n-const.)	Constant speed (n-const.)	-	-
	-	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	Heating/Cooling switching	-	-
	Night set back	Night set back	-	-
	Heat quantity measurement	Heat quantity measurement	-	-
	Cooling quantity measurement	Cooling quantity measurement	-	-
	Key locking function	Key locking function	-	-
	No-Flow Stop	No-Flow Stop	-	-
	Reset function to factory setting	Reset function to factory setting	-	-
	Adjustable volume flow limiter	Adjustable volume flow limiter	-	-
	Ability to save and restore configured pump settings (3 restoration points)	Ability to save and restore configured pump settings (3 restoration points)	-	-
	Fault message and warning message in plain text including suggested remedy	Fault message and warning message in plain text including suggested remedy	-	-
Multi pump operation	Main/Standby	Main/Standby	Main/Standby	-
	Parallel operation	Parallel operation	-	-
Measurement value logging	Heat and cooling capacity measurement	Heat and cooling capacity measurement	-	-
Display	Setpoint	Setpoint	Setpoint	-
	Actual delivery head	Actual delivery head	-	-
	Actual volume flow	Actual volume flow	-	-
	Actual power consumption	Actual power consumption	-	-
	Energy consumption	Energy consumption	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-
	Warning messages in plain text (display status: yellow)	Warning messages in plain text (display status: yellow)	-	-
	Error messages in plain text (display: red)	Error messages in plain text (display: red)	-	-
	Pump venting (display status: blue)	Pump venting (display status: blue)	-	-
	Control mode	Control mode	-	-
	Active influences (e.g. STOP)	Active influences (e.g. STOP)	-	-
Display (can also be selected)	Speed	Speed	-	-
	Heating quantity	Heating quantity	-	-
	Cooling quantity	Cooling quantity	-	-
	Operating hours	Operating hours	-	-
	Mains voltage	Mains voltage	-	-
	Warning message	Warning message	-	-
	Error message	Error message	-	-
Pump venting function	Yes	Yes	-	-
Dry-running detection	yes	yes	-	-
Equipment
Thermal insulation shell	Yes	No	-	-
Cold water insulation shell	As accessories	No	-	-
Quick electrical connection	Wilo Connector	Wilo Connector	Wilo plug	-
Blocking-current proof motor	yes	yes	-	-
Particle filter	yes	yes	-	-
Key lock	yes	yes	-	-
Fluid temperature sensor	Integrated	Integrated	-	-
Connectivity
Analogue signal as standard	0-10 V	0-10 V	-	-
	2-10 V	2-10 V	-	-
	4-20 mA	4-20 mA	-	-
	0-20 mA	0-20 mA	-	-
	PT1000	PT1000	-	-
Digital output	SSM	SSM	-	-
	SBM	SBM	-	-
	-	-	SSM/SBM (via accessories Connect module Yonos MAXO)	-
Digital input	Ext. OFF	Ext. OFF	-	-
	Ext. MIN	Ext. MIN	-	-
	Ext. MAX	Ext. MAX	-	-
	MANUAL (BMS-OFF)	MANUAL (BMS-OFF)	-	-
	Key lock	Key lock	-	-
	Switchover between heating/cooling mode	Switchover between heating/cooling mode	-	-
	-	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
Bus communication via additional accessories	BACnet MS/TP	BACnet MS/TP	-	-
	LON	LON	-	-
	Modbus RTU	Modbus RTU	-	-
	CANopen	CANopen	-	-
	PLR	PLR	-	-
	BACnet IP	BACnet IP	-	-
	Modbus TCP	Modbus TCP	-	-
Access via the Wilo-Assistant app	Yes	Yes	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	Via Wilo-Smart Gateway	-	-
wire data exchange and remote operation	Bluetooth	Bluetooth	-	-
Motor data
Phases	1	1	-	3
Mains connection	1~230 V, 50/60 Hz	-	-	3~400 V, 50 Hz
Energy efficiency index (EEI) %%fn=footnote%%	≤0.17	≤0.17	-	-
Min current	0.3 A	0.3 A	-	-
Max current	6.13 A	6.13 A	-	-
Rated power	1212 W	1212 W	-	-
Min. speed	500 1/min	500 1/min	-	-
Max. speed	3050 1/min	3050 1/min	-	-
Power consumption	20 W	20 W	-	-
Power consumption	1410 W	1410 W	-	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-	-
Insulation class	F	F	-	-
Protection class	IPX4D	IPX4D	-	-
Materials
Bearing	Carbon, antimony-impregnated	Carbon, antimony-impregnated	-	-
Pipe connection
Inlet connection	DN 80	DN 80	-	DN 80
PN connection on suction side	PN 6	PN 6	-	PN 6
Outlet connection	DN 80	DN 80	-	DN 80
PN connection on discharge side	PN 6	PN 6	-	PN 6
Dimension, weight
Length with packaging	600 mm	800 mm	550 mm	-
Length	485 mm	360 mm	360 mm	-
Height with packaging	525 mm	525 mm	425 mm	-
Height	360 mm	463 mm	439 mm	-
Width with packaging	400 mm	600 mm	530 mm	-
Width	300 mm	570 mm	424 mm	-
Gross weight, approx.	36.2 kg	70.5 kg	60.6 kg	-
Net weight, approx.	32.9 kg	65.2 kg	56.6 kg	-
Ordering information
Product description	Stratos MAXO 80/0,5-12 PN6	Stratos MAXO-D 80/0,5-12 PN 6	Yonos MAXO-D 80/0,5-12 PN 6	NZBZ 78-3 PN6
Brand	Wilo	Wilo	Wilo	Biral
EAN number	4048482681672	4048482700045	4048482408026	-
Article number	2164598	2164662	2120672	-
Price (excl. VAT)	EUR 6,257.-	EUR 11,576.-	EUR 8,065.-	-

Data sheet

Description
Product description	NZBZ 78-3 PN6
Brand	Biral
Port-to-port length l0	370 mm

Motor data
Phases	3
Mains connection	3~400 V, 50 Hz

Pipe connection
Inlet connection	DN 80
PN connection on suction side	PN 6
Outlet connection	DN 80
PN connection on discharge side	PN 6