EMU TRE 221.51-4/16
Unit | |
---|---|
Power consumption at duty point P1.1 | 4.16 hp |
Max. thrust F | 584.5 lbf |
Thrust to power ratio | 839 N/kW |
Max. weight* m | 463.0 lb |
Explosion protection ATEX | optional |
Explosion protection FM | optional |
Protection class motor | IP68 |
Propeller | |
---|---|
Propeller model | 2-blade propeller with self-cleaning hub; clogging- and entwining-free |
Nominal propeller diameter Dnom | 82.7 in |
Transmission ratio | 34.658 |
Filling quantities and types | |
---|---|
Filling prechamber | Gear oil CLP220 |
Filling volume prechamber V | 0.3 US gal |
Filling gear chamber | Gear oil CLP220 |
Fill volume gear chamber V | 0.2 US gal |
Filling sealing chamber | White oil |
Fill volume sealing chamber V | 0.3 US gal |
Motor/electronics | |
---|---|
Motor type | TE 17-4/16R (Ex) |
Motor design | Submersible motor – surface-cooled |
Mains connection | 3~230 V, 60 Hz |
Rated current IN | 14.20 A |
Starting current - direct IA | 120.00 A |
Power consumption P1 max | 6.2 hp |
Rated power P2 | 5.4 hp |
Speed original n | 1747 RPM |
Motor efficiency class | IE3 |
Efficiency ηM | 87.3 % |
Power factor cos φ100 | 0.81 |
Max. fluid temperature Tmax | 72 °F |
Min. fluid temperature Tmin | 5 °F |
Max. immersion depth | 65.62 ft |
Insulation class | H |
Max. switching frequency t | 15 1/h |
min. switching break t | 3 min |
Starting torque M | 72.3 lbf ft |
Moment of inertia | 0.32 lb ft² |
Motor bearings | 2 grooved ball bearing |
Materials | |
---|---|
Motor housing | Grey cast iron |
Static gaskets | FKM |
Motor shaft | 1.4021, X20Cr13 |
Seal, gear/sealing chamber | SiC/SiC, Q1Q1VGG |
Gear housing | 5.1301, EN-GJL-250 |
Planetary gear | 1.7131, 16MnCr5 |
Hollow gear | 1.5216, 17MnV6 |
Sun gear | 1.7131, 16MnCr5 |
Output shaft | 1.4462, X2CrNiMoN22-5-3 |
Seal, gear chamber/prechamber | FKM |
Sealing chamber | 5.1301, EN-GJL-250 |
Seal on the fluid side | Q1Q1VGG |
Seal bushing | 1.4571, X6CrNiMoTi17-12-2 |
Propeller hub | 5.3106, EN-GJS-400-15 |
Propeller | VE-GFRP |
Gear | |
---|---|
Gear construction type | m 2.0 as per DIN 780-1:1977-05 /P10 (ISO54:1996-12); sun and planetary gears case hardened and sanded, internal gear butt-jointed |
Gear bearings | Six needle roller bearing (planetary), two tapered roller bearings (output shaft adjustable type), gearing permanently fixed |
Service life Lh10 | 100,000 operating hours, ISO 281:2007-02 |