Wilo-Flumen OPTI-TR 20 … 40
Your advantages
- • Low cleaning work by avoiding deposits during basin draining thanks to installation close to the ground
- Low clogging rate and reliable operation thanks to optimised hydraulics
- Low-wearing, due to the use of stainless steel precision-cast propellers with the lowest cavitation tendency
- A wide range of possible uses in diverse applications, even at high-interval running times
- High flexibility thanks to the most diverse installation options and accessories
Recommended services
Design
Fast running, directly driven submersible mixer, in continuous or intermittent operation.
Application
- Stormwater retention tanks
- Pump sump
- Mixing and buffer basins
- Special applications
Liquid
For suspension and homogenisation in commercial areas of:
- Process sewage
- Sewage containing faeces
- Wastewater (with small amounts of sand and gravel)
Equipment/function
- Thermal motor monitoring with bimetallic strip
- Operation with frequency converter possible
Typekey
Example: | Wilo-Flumen OPTI-TR 30-1.145-4/16Ex S17 |
Flumen | Submersible mixer, horizontal |
OPTI-TR | Series: Mixer with standard asynchronous motor |
30 | x10 = nominal propeller diameter in mm |
1 | Model |
145 | Rated propeller speed in rpm |
4 | Number of poles |
16 | x10 = stator pack length in mm |
Ex | Ex-rated |
S17 | Propeller code for special propeller (omitted for standard propeller) |
Technical data
- Mains connection: 3~460 V, 60 Hz
- Fluid temperature: 37 … 104 °F
- Submerged operating mode: continuous duty (S1)
- Protection class: permanently submerged (IP68)
- Insulation class: H
- Max. switching frequency: 15/h
- Max. immersion depth: 66 ft
Materials
- Motor housing: ASTM A 351 or ASTM A48 Class 35/40B
- Seal housing: ASTM A 351
- Seal:
- On the motor side: SiC/SiC or nitrile
- Fluid side: SiC/SiC
- Propeller: ASTM A 351
Construction
Propeller
2- or 3-bladed propeller made of solid material with a nominal propeller diameter of 8 in to 16 in. Clogging-free propeller geometry design made possible by backward-curved incoming flow edge.
Motor
Surface-cooled submersible motor in three-phase current design with permanently lubricated und large-size rolling bearings. The motor winding is equipped with temperature monitoring. The motor heat is given off directly to the surrounding fluid via the motor housing. The connection cable is designed for heavy mechanical loads, sealed water pressure-tight against the fluid and is sealed longitudinally watertight. The connection cable has bare cable ends and is 40 ft long as standard.
Seal
Large-volume sealing chamber with double shaft sealing. The sealing chamber is filled with white oil and absorbs the leakage from the seal on the fluid side. A corrosion- and wear-resistant mechanical seal is used on the fluid side. The seal on the motor side involves either a rotary shaft seal or a mechanical seal.
Scope of delivery
- Submersible mixer with attached propeller and connection cable
- Accessories attached, depending on the installation type
- Installation and operating instructions
Options
- Thermal motor monitoring as temperature controller and temperature limiter
- Thermal motor monitoring with PTC sensor
- Fluid temperatures up to 140 °F, depending on the motor type and motor capacity
- Sealing chamber monitoring
- Ex-rated in accordance with ATEX, FM and IEC-Ex
- Ceram coating for housing parts made of grey cast iron
Accessories
- Mounting bracket for wall and floor fixation
- Lowering device
- Auxiliary lifting device
- Cable bollard to secure the hoist cable
- Adjustable stop
- Additional rope anchoring
- Fixation sets with anchor bolts
Installation and operating instructions
Flumen OPTI_EXCEL IOM
| Number of pages | 104 |
| Language | en |
PDF (9 MB)General overview
Flumen OPTI TR20-1-TR30-1TRE30TR40-1 Engineering Specification
| Number of pages | 6 |
| Language | en |
PDF (454 KB)OPTI Flumen, EXCEL - TRE20TR28-1SS Engineering Specification
| Number of pages | 6 |
| Language | en |
PDF (159 KB)Certification booklet
Wilo-Flumen OPTI-TR 20-1 ... 40-1, Wilo-Flumen EXCEL-TRE 20 ... 40, Wilo-Flumen OPTI-TR 50-3 ... 120-1, Wilo-Flumen EXCEL-TRE 50-3 ... 90-2, Wilo-EMU TR 50-2 ... 120-1, Wilo-EMU TRE 50-2 ... 90-2, Wilo-EMU TR/TRE 212 ... 326-3
| Article Number | 6074694 |
| Edition | 2023-10 |
| Number of pages | 68 |
| Language | en |
PDF (37 MB)Brochure
Flumen OPTI, EXCEL Brochure
| Number of pages | 4 |
| Language | en |
PDF (4 MB)Efficiency for your Treatment Processes
| Number of pages | 20 |
| Language | en |
PDF (6 MB)