Wilo-SCP
Your advantages
- Horizontal split casing allows replacement of bearings and mechanical seal without disturbing the system piping
- Double suction design available for maximum efficiencies
- Hydraulically balanced double-suction impeller for minimal axial thrust
- Tongue & groove neck ring design eliminates seizing of rotating assembly
- Pump shaft guards
Recommended services
Wilo SCP Family Pump Curve
Design
- Horizontal split case, single and two stage, base mounted centrifugal pump
Application
- Heating and Cooling Systems
- Transfer and Pressure Boosting
- Boiler Feed/Condensate
- Municipal Water Supply
- Irrigation
- Industrial Applications
- Max. Flow: 5,000 GPM
- Max. Head: 180 feet
Equipment/function
Horizontal split casing allows replacement of bearings and mechanical seal without disturbing the system piping
Double suction design available for maximum efficiencies
Hydraulically balanced double-suction impeller for minimal axial thrust
Tongue & groove neck ring design eliminates seizing of rotating assembly
Pump shaft guards
Typekey
SCP 3 x 2 x 13 DS | |
SCP | Split Case Pump |
3 | Suction (inlet) flange size (inch) |
2 | Discharge (outlet) flange size (inch) |
13 | Impeller diameter max |
HA | Standard type A |
HB | Standard type B |
HS | Single stage hydraulic |
DS | Two-stage hydraulic |
DV | Double Volute |
Technical data
- Power supply: 208-230/460/3/60 and 575/3/60 Volt
- Fluid temperature range: 18 to 250 °F (-8 to +120 °C)
- Operating pressure: 250 PSI (16 Bar) or 363 PSI (25 Bar)
- Suction flange size range: 2 1/2" to 20", Class 125 ANSI type
- Discharge flange size range: 2" to 16", Class 125 ANSI type
- Maximum Head: 180'
- Maximum flow: 5000 USGPM
- Max Hp: 500 Hp
Materials
- Pump housing: ASTM A48 Class 35 gray cast iron
- Impeller: ASTM B584 C83600 Leaded Tin Bronze
- Shaft; AISI 410 Stainless Steel
Construction
- Horizontal split case, single or double suction, single or two stage base mounted centrifugal pump
- Mechanical sealed (gland packed version optional)
- 60 Hz, 2-, 4- and 6-pole motors, ODP standard, TEFC optional
- Optional spacer coupling
Scope of delivery
- Pump end only (bare shaft pump) or
- Pump, base, coupling and coupling guard or
- Complete assembly (pump, base, coupling, guard and motor)
- Installation and operating instructions
Options
- Automatic pump control via WILO CC HVAC Controller
- Higher flows up to 15,400 USGPM, 70,000 USGPM as special version
- Special motor (6000V, 10 000 V etc.)
- Special construction
- Impeller: Lead free bronze, grey cast iron, stainless steel
- Housing: Grey cast iron, ductile iron, Ni-resist cast iron, stainless steel
Installation and operating instructions
Wilo SCP IOM
| Page format | 215.9 x 279.4 mm |
| Number of pages | 20 |
PDF (2 MB)Catalogue
Wilo SCP Catalog
| Page format | 215.9 x 279.4 mm |
| Number of pages | 106 |
PDF (8 MB)General overview
Wilo SCP Engineering Specification
| Page format | 209.9 x 297.0 mm |
| Number of pages | 5 |
PDF (133 KB)Brochure
Wilo SCP Brochure
| Page format | 215.9 x 279.4 mm |
| Number of pages | 8 |
PDF (5 MB)Data sheet
Wilo SCP Submittal Data Sheet
| Page format | 215.9 x 279.4 mm |
| Number of pages | 106 |
PDF (6 MB)