CO MVI
Pressure-boosting system
•1/3HP-100HP per pump (up to four pumps in parallel)
•Strong base support with close-fitting profile to
maneuver through doorways
•Smaller footprint allows for installations into tight areas
•NSF/ANSI 61 & 372 certified systems 304 stainless
steel construction
•Full system kWH energy reporting
•Real-time diagnostics and remote monitoring
•Onboard ModBUS and optional BACnet & LonWorks
interface
•Variable speed control per pump
•Adjustable low-pressure cut-out
•Balanced run time across all pumps


Design
2-4 Pump Pressure-Boosting SystemsApplication
Max. Flow: 3,160 GPM
Max. Head: 989 feet
Equipment/function
•1/3HP-100HP per pump (up to four pumps in parallel)
•Strong base support with close-fitting profile to
maneuver through doorways
•Smaller footprint allows for installations into tight areas
•NSF/ANSI 61 & 372 certified systems 304 stainless
steel construction
•Full system kWH energy reporting
•Real-time diagnostics and remote monitoring
•Onboard ModBUS and optional BACnet & LonWorks
interface
•Variable speed control per pump
•Adjustable low-pressure cut-out
•Balanced run time across all pumps
Type key
Example: | Wilo CO2 MVI-1SB-225-3/2-20HP-304E-230V~3 |
Wilo | Brand Name |
CO | Product Family: Pressure Booster Systems (1 VFD Per Pump) |
2 | Number of Pumps |
MVI | Series designation of pumps |
1SB | Reduced Manifold (1 Standby Pump Required) |
225 | Nominal Flow Rate in US Gallons per Minute |
-3 | Number of Stages (Impellers in Series) |
/2 | Number of Trimmed Impellers |
20HP | Horsepower |
304 | Stainless Steel Type |
E | EPDM Elastomers |
230V | Voltage |
~3 | Phase |
Technical data
Fluid Temp Range -4°F to 248°F (-20°C to 120°C) with a minimum of 32°F for domestic water
Electrical Connections: 1~IN 3~208-230 OUT/3~208-230/460/575V
Rated Pressure: 232/363/435 PSI
Flange Connections: 150 or 300 Class flanges depending on booster working pressure
TEFC motors standard
Materials
• All 304 Stainless Steel Construction
• NSF/ANSI 61 Certified Systems
• EPDM/FKM Elastomers
• Mechanical Seal Options: TungstenCarbide/EPDM, or optional Viton®/FKM
