Contact

011 608 2780

Series description

Your advantages

  • Pressure-tight pump chamber for subterranean and aboveground installation
  • Flexible due to free selection of inlets
  • Large tank volume
  • Including pipework, level control, switchgear and pump

Construction

Pump chamber made of plastic with integrated pump as concealed pumping station or floor-mounted lifting unit

Application

Pumping of sewage without faeces that cannot be returned to the sewer system using natural falls and for the draining of objects that are below the backflow level.

Equipment/function

Pump chamber complete ready for connection with pipework and pump.

Scope of delivery

  • Tank (for single or twin-head pump system)
  • Built-in pipework
  • Non-return ball valve
  • Including pump
  • Level switching
  • Switchgear (for three-phase pump or double-pump system)
  • Cover with seal (can be walked on, supporting a weight up to 200 kg)
  • Hole saw Ø 124 mm, inlet seal DN 100 (for pipe Ø 110 mm)
  • 1 PVC hose section Ø 50 mm with clamps for connection of a diaphragm hand pump
  • Fixation material for floor fixation
  • Installation and operating instructions

Type key

Example:

Wilo-DrainLift WS 40E/TC40 (3~)-BV

WS

Synthetic pumping station

40

Pressure outlet of the system

E

E = single-pump system D = double-pump system

TC 40

Built-in pump

(3~)

Three-phase current motor

BV

non-return ball valve

Technical data

  • Inlet: DN 100/DN 150
  • Ventilation: DN 70
  • Maximum pressure in the pressure pipe: 1.5 bar.

Materials

  • Pump chamber: PE
  • Pipework: 1.4404
  • Surface coupling: PUR
  • Non-return ball valve: Cast iron
  • Gate valve: bronze
  • Pump: Cast iron

Description/construction

The Wilo-DrainLift WS 40 Basic is an automatic lifting unit as a single-pump or double-pump system. The plastic shaft has integrated finning for increasing stiffness and anti-buoyancy, and also provides freely-definable inlets.

The system can be installed in buildings as a lifting unit, as well as outside buildings like a traditional pump chamber in the ground.

Technical data

  • Inlet: DN 100/DN 150
  • Ventilation: DN 70
  • Maximum pressure in the pressure pipe: 1.5 bar.

Pump

The submersible sewage pump Wilo-Drain TC 40 is preinstalled.

Downloads

REACH regulation

Edition 2019-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (853 kB)

Download

General overview 2020 International version

Edition 2020
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 78

PDF (48 MB)

Download

General overview 2019 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 74

PDF (42 MB)

Download

Product

PDF:

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download