FLA-2 MVI 7003 PN10
Pressure boosting system to be connected indirectly and fully automatic double pump compact unit as homogeneous redundant version of a single-pump system for fire extinguishing applications.
Two non-self-priming, multi-stage high-pressure multi-stage centrifugal pumps in vertical design. Impellers and stage housing are made of stainless steel.
IE2 standard motors, 3-phase, 2-pole.
Diaphragm pressure vessel (capacity 8 l), joint tubing on suction and pressure side
per pump: with non-return valve, shut-off valve on suction and pressure side (sealed in opened state), manometer, pressure switch for automatic system control.
Comes as standard with pump protection by means of minimum volume acceptance via bypass without auxiliary energy.
FLA switchgear for fire extinguishing systems in accordance with DIN 14462. Integrated in a steel sheeting housing.
Homogeneously redundant switchgear version without mutual lock, i.e. two complete autonomous working controls with one power supply each for operation of one pump each. Scope of functions and suitability in accordance with DIN 14462 have been proven by TÜV test report.
Per pump with one control consisting of:
Built-in motor protection only for signalling of faults. The motor protection is activated in test run.
Switch for Manual-Automatic mode Control of the pump by pressure switch in automatic mode; expandable to up to eight sensors (in series connection), for example external on/off limit switch etc. (more than eight sensors on request). All sensor signals which could lead to the pump being started are monitored for wire breakage and short circuits.
System with programmable time switch for regular test run.
Dry-running protection relay, for example, for connection of low water float switch from the WILO FLA break tanks, electrodes, pressure switches etc.; low water status only for signalling of faults. The low water is activated in test run.
With signal lamps for operational readiness (green), pump ON (green), fault (red), pump request (white) as well as potential-free contacts for operational readiness and collective fault (possible as common signal) and pump ON.
Suitable for use in industrial and residential areas in accordance with the basic requirements of guideline 2004/108/EC (EMC guideline).
The system has been mounted on the base frame with wires and pipes are ready for connection.
The customer must take suitable measures to ensure that the flow pressure of 8 bar and the resting pressure of 12 bar are not exceeded at any fire hose reel.
|Max. delivery head Hmax||76.7 m|
|Number of pumps||2|
|Fluid temperature T||3 °C|
|Ambient temperature T||5 °C|
|Maximum operating pressure PN||10 bar|
|Maximum inlet pressure p inl||10 bar|
|Mains connection||3~400 V, 50 Hz|
|Rated power P2||18.5 kW|
|Rated current IN||32.8 A|
|Power factor cos φ||0.89|
|Rated speed n||2900 1/min|
|Activation type||Star-Delta (YΔ)|
|Protection class motor||IP55|
|Protection class switchgear||IP54|
|Pump housing||Grey cast iron|
|Pipework material||Stainless steel|
|Pipe connection on the suction side DNs||DN 125|
|Pipe connection on the discharge side DNd||DN 125|
|Product description||FLA-2 MVI 7003 PN10|
|Net weight, approx. m||879 kg|
Installation and operating instructions
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
More suitable services
Extended warranty FFS (twin-head pump)
In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service.
Extended warranty includes:
Maintenance COMFORT FLA systems DIN 14462
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.