VA 65/180 X | Wilo

VA 65/180 X

Number of results: 5

Flow

Head / Pump pressure

Product design type	Glandless premium smart-pump	Glandless high-efficiency pump	Glandless standard pump	Glandless standard high-efficiency pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos MAXO 30/0,5-6 PN 10	Stratos PICO 30/0,5-6	TOP-S 30/7 (1~230 V, PN 10)	Yonos PICO1.0 30/1-6	Yonos PICO 30/1-6	VA 65/180 X
Article number	2164573	4244400	2048322	4248089	4215520	60115988
Series	Wilo-Stratos MAXO	Wilo-Stratos PICO	Wilo-TOP-S	Wilo-Yonos PICO1.0	Wilo-Yonos PICO	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	180 mm	180 mm	180 mm	180 mm	180 mm	180 mm
Pump connection	G 2	G 2	G 2	G 2	G 2	-
Pump connection (alternative designation)	RP 1 1/2	RP 1 1/2	RP 1 1/2	RP 1 1/2	RP 1 1/2	-
	DN 30	DN 30	DN 30	DN 30	DN 30	-
Display	Graphic colour display (4.3 inches)	Graphic colour display (2 inches)	No display	LED segment display	LED segment display	-
Comment	Fits without modifications	Fits without modifications	Fits without modifications	Fits without modifications	Fits without modifications	-
Result summary
Variable criteria
Designation comparison pump	TOP-S 30/7 (3~400/230 V, PN 10)	-	-	-	-	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	-	-	-	-
	Dynamic Adapt plus	Dynamic Adapt plus	-	-	-	-
	ΔT-const. for constant differential temperature control	-	-	-	-	-
	T-const. for constant temperature control	-	-	-	-	-
	Constant Q for constant volume flow control	-	-	-	-	-
	Multi Flow Adaptation	-	-	-	-	-
	Δ T-const. for constant differential temperature control	-	-	-	-	-
	User-defined PID control	-	-	-	-	-
	Constant speed (n-const.)	Constant speed (n-const.)	Constant speed (n-const.)	-	-	-
	-	-	-	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	-	-	-	-	-
	Night set back	Night set back	-	-	-	-
	Heat quantity measurement	-	-	-	-	-
	Cooling quantity measurement	-	-	-	-	-
	Key locking function	Key locking function	-	-	-	-
	No-Flow Stop	-	-	-	-	-
	Reset function to factory setting	Reset function to factory setting	-	-	-	-
	Adjustable volume flow limiter	-	-	-	-	-
	Ability to save and restore configured pump settings (3 restoration points)	-	-	-	-	-
	Fault message and warning message in plain text including suggested remedy	-	-	-	-	-
	-	Mode for pressure-independent control valves (PICV)	-	-	-	-
	-	Reset function for electricity meter	-	-	-	-
Multi pump operation	Main/Standby	-	-	-	-	-
	Parallel operation	-	-	-	-	-
Measurement value logging	Heat and cooling capacity measurement	-	-	-	-	-
Display	Setpoint	Setpoint	-	Setpoint	Setpoint	-
	Actual delivery head	Actual delivery head	-	-	-	-
	Actual volume flow	Actual volume flow	-	-	Actual volume flow	-
	Actual power consumption	Actual power consumption	-	Actual power consumption	Actual power consumption	-
	Energy consumption	Energy consumption	-	-	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-	-	-	-
	Warning messages in plain text (display status: yellow)	Warning messages in plain text (display status: yellow)	-	-	-	-
	Error messages in plain text (display: red)	Error messages in plain text (display: red)	-	-	-	-
	Pump venting (display status: blue)	-	-	-	-	-
	Control mode	Control mode	-	-	-	-
	Active influences (e.g. STOP)	Active influences (e.g. STOP)	-	-	-	-
	-	Actual speed	-	-	-	-
	-	Manually activated restart or pump venting function	-	-	Manually activated restart or pump venting function	-
	-	-	-	-	Fault signals (error codes)	-
Display (can also be selected)	Speed	-	-	-	-	-
	Heating quantity	-	-	-	-	-
	Cooling quantity	-	-	-	-	-
	Operating hours	-	-	-	-	-
	Mains voltage	-	-	-	-	-
	Warning message	-	-	-	-	-
	Error message	-	-	-	-	-
Pump venting function	Yes	Manual	-	Manual	Manual	-
Dry-running detection	yes	yes	-	-	-	-
Equipment
Thermal insulation shell	Yes	Yes	-	As accessory	As accessory	-
Cold water insulation shell	As accessories	-	-	-	-	-
Quick electrical connection	Wilo Connector	Wilo Connector	-	Wilo Connector	Wilo Connector	-
Blocking-current proof motor	yes	yes	-	yes	yes	-
Particle filter	yes	yes	-	-	yes	-
Key lock	yes	yes	-	-	-	-
Operating elements	-	Green button and back button	-	-	Green button	-
Fluid temperature sensor	Integrated	-	-	-	-	-
Connectivity
Analogue signal as standard	0-10 V	-	-	-	-	-
	2-10 V	-	-	-	-	-
	4-20 mA	-	-	-	-	-
	0-20 mA	-	-	-	-	-
	PT1000	-	-	-	-	-
	-	0-10 V (via BMS Connect module accessories)	-	-	-	-
Digital output	SSM	-	-	-	-	-
	SBM	-	-	-	-	-
	-	SSM/SBM (via BMS Connect module accessories)	-	-	-	-
Digital input	Ext. OFF	-	-	-	-	-
	Ext. MIN	-	-	-	-	-
	Ext. MAX	-	-	-	-	-
	MANUAL (BMS-OFF)	-	-	-	-	-
	Key lock	-	-	-	-	-
	Switchover between heating/cooling mode	-	-	-	-	-
	-	Ext. OFF/Ext. MIN/ Ext. MAX (via BMS Connect module accessories)	-	-	-	-
Bus communication via additional accessories	BACnet MS/TP	-	-	-	-	-
	LON	-	-	-	-	-
	Modbus RTU	-	-	-	-	-
	CANopen	-	-	-	-	-
	PLR	-	-	-	-	-
	BACnet IP	-	-	-	-	-
	Modbus TCP	-	-	-	-	-
Access via the Wilo-Assistant app	Yes	Via accessory Wilo-Smart Connect Module BT	-	-	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	-	-	-	-
wire data exchange and remote operation	Bluetooth	Via accessories Wilo-Smart Connect Module BT	-	-	-	-
Motor data
Phases	1	1	1	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	-
Energy efficiency index (EEI)	≤0.18	≤0.18	-	≤0.20	≤0.20	-
Min current I_min	0.11 A	-	-	-	-	-
Max current I_max	0.95 A	-	-	-	-	-
Rated power P₂	114 W	30 W	90 W	30 W	30 W	-
Min. speed n_min	750 1/min	700 1/min	-	700 1/min	700 1/min	-
Max. speed n_max	3050 1/min	4200 1/min	2600 1/min	4200 1/min	4200 1/min	-
Power consumption P_{1 min}	7 W	3 W	-	4 W	4 W	-
Power consumption P_{1 max}	135 W	40 W	195 W	40 W	40 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61000-6-3	EN 61000-6-3	EN 61000-6-3	EN 61000-6-3	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2	-
Electromagnetic compatibility	-	EN 61800-3	EN 61800-3	EN 61800-3	EN 61800-3	-
Insulation class	F	F	H	F	F	-
Protection class	IPX4D	IPX4D	IPX4D	IPX4D	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	Grey cast iron	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PP-GF40	PP-LGF50	PP-GF40	PP-GF40	-
Shaft	Stainless steel	Stainless steel	Stainless steel	Stainless steel	Stainless steel	-
Bearing	Carbon-graphite	Carbon, metal-impregnated	Carbon-graphite	Carbon, metal-impregnated	Carbon, metal-impregnated	-
Pipe connection
Inlet connection	G 2	G 2	G 2	G 2	G 2	G 2
PN connection on suction side	PN 10	PN 10	PN 10	PN 10	PN 10	PN 10
Outlet connection	G 2	G 2	G 2	G 2	G 2	G 2
PN connection on discharge side	PN 10	PN 10	PN 10	PN 10	PN 10	PN 10
Dimension, weight
Length with packaging	400 mm	194 mm	270 mm	194 mm	194 mm	-
Length L	335 mm	180 mm	180 mm	180 mm	180 mm	-
Height with packaging	263 mm	121 mm	215 mm	105 mm	105 mm	-
Height H	180 mm	114 mm	236 mm	102 mm	102 mm	-
Width with packaging	300 mm	213 mm	178 mm	174 mm	174 mm	-
Width W	210 mm	165 mm	176 mm	131 mm	131 mm	-
Gross weight, approx. m	8.3 kg	2.3 kg	5.5 kg	2.2 kg	2.2 kg	-
Net weight, approx. m	7.2 kg	2 kg	5 kg	2 kg	2 kg	-
Ordering information
Product description	Stratos MAXO 30/0,5-6 PN 10	Stratos PICO 30/0,5-6	TOP-S 30/7 (1~230 V, PN 10)	Yonos PICO1.0 30/1-6	Yonos PICO 30/1-6	VA 65/180 X
Brand	Wilo	Wilo	Wilo	Wilo	Wilo	DAB
EAN number	4048482699424	4062679126128	4016322709565	4062679182094	4048482758527	-
Article number	2164573	4244400	2048322	4248089	4215520	60115988

Data sheet

Description
Product description	VA 65/180 X
Brand	DAB
Article number	60115988
Port-to-port length l0	180 mm

Motor data
Phases	1

Pipe connection
Inlet connection	G 2
PN connection on suction side	PN 10
Outlet connection	G 2
PN connection on discharge side	PN 10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.