V 333 R 1-f | Wilo

V 333 R 1-f

Number of results: 3

Flow

Head / Pump pressure

Product design type	Glandless standard high-efficiency pump	Glandless standard pump	Glandless premium smart-pump	Existing pump



Description
Product description	Yonos MAXO 30/0,5-7 PN 10	TOP-S 30/7 (1~230 V, PN 10)	Stratos MAXO 30/0,5-6 PN 10	V 333 R 1-f
Article number	2120642	2048322	2164573	-
Series	Wilo-Yonos MAXO	Wilo-TOP-S	Wilo-Stratos MAXO	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length	180 mm	180 mm	180 mm	180 mm
Pump connection	G 2	G 2	G 2	-
Pump connection (alternative designation)	RP 1 1/2	RP 1 1/2	RP 1 1/2	-
	DN 30	DN 30	DN 30	-
Display	LED segment display	No display	Graphic colour display (4.3 inches)	-
Comment	Fits without modifications	Fits without modifications	Fits without modifications	-
Function
Control mode	Δp-v for variable differential pressure	-	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	-	Δp-c for constant differential pressure	-
	Constant speed (3 speed stages)	-	-	-
	-	Constant speed (n-const.)	Constant speed (n-const.)	-
	-	-	Q limit for limiting the maximum volume flow	-
	-	-	Dynamic Adapt plus	-
	-	-	ΔT-const. for constant differential temperature control	-
	-	-	T-const. for constant temperature control	-
	-	-	Constant Q for constant volume flow control	-
	-	-	Multi Flow Adaptation	-
	-	-	Δ T-const. for constant differential temperature control	-
	-	-	User-defined PID control	-
Special features of the series	-	-	Heating/Cooling switching	-
	-	-	Night set back	-
	-	-	Heat quantity measurement	-
	-	-	Cooling quantity measurement	-
	-	-	Key locking function	-
	-	-	No-Flow Stop	-
	-	-	Reset function to factory setting	-
	-	-	Adjustable volume flow limiter	-
	-	-	Ability to save and restore configured pump settings (3 restoration points)	-
	-	-	Fault message and warning message in plain text including suggested remedy	-
Multi pump operation	Main/Standby (with Connect Module Yonos MAXO)	-	-	-
	-	-	Main/Standby	-
	-	-	Parallel operation	-
Measurement value logging	-	-	Heat and cooling capacity measurement	-
Display	Setpoint	-	Setpoint	-
	Fault signals (error codes)	-	-	-
	-	-	Actual delivery head	-
	-	-	Actual volume flow	-
	-	-	Actual power consumption	-
	-	-	Energy consumption	-
	-	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-
	-	-	Warning messages in plain text (display status: yellow)	-
	-	-	Error messages in plain text (display: red)	-
	-	-	Pump venting (display status: blue)	-
	-	-	Control mode	-
	-	-	Active influences (e.g. STOP)	-
Display (can also be selected)	-	-	Speed	-
	-	-	Heating quantity	-
	-	-	Cooling quantity	-
	-	-	Operating hours	-
	-	-	Mains voltage	-
	-	-	Warning message	-
	-	-	Error message	-
Pump venting function	-	-	Yes	-
Dry-running detection	-	-	yes	-
Equipment
Thermal insulation shell	As accessory	-	Yes	-
Cold water insulation shell	-	-	As accessories	-
Quick electrical connection	Wilo plug	-	Wilo Connector	-
Blocking-current proof motor	yes	-	yes	-
Particle filter	yes	-	yes	-
Key lock	-	-	yes	-
Fluid temperature sensor	-	-	Integrated	-
Connectivity
Analogue signal as standard	-	-	0-10 V	-
	-	-	2-10 V	-
	-	-	4-20 mA	-
	-	-	0-20 mA	-
	-	-	PT1000	-
Digital output	SSM/SBM (via accessories Connect module Yonos MAXO)	-	-	-
	-	-	SSM	-
	-	-	SBM	-
Digital input	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	-	-
	-	-	Ext. OFF	-
	-	-	Ext. MIN	-
	-	-	Ext. MAX	-
	-	-	MANUAL (BMS-OFF)	-
	-	-	Key lock	-
	-	-	Switchover between heating/cooling mode	-
Bus communication via additional accessories	-	-	BACnet MS/TP	-
	-	-	LON	-
	-	-	Modbus RTU	-
	-	-	CANopen	-
	-	-	PLR	-
	-	-	BACnet IP	-
	-	-	Modbus TCP	-
Access via the Wilo-Assistant app	-	-	Yes	-
Connection for Wilo-Smart Cloud	-	-	Via Wilo-Smart Gateway	-
wire data exchange and remote operation	-	-	Bluetooth	-
Motor data
Phases	1	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50 Hz	1~230 V, 50/60 Hz	1~230 V, 50 Hz
Energy efficiency index (EEI)	≤0.20	-	≤0.18	-
Min current	0.08 A	-	0.11 A	-
Max current	1 A	-	0.95 A	-
Rated power	85 W	90 W	114 W	-
Min. speed	1000 1/min	-	750 1/min	-
Max. speed	3700 1/min	2600 1/min	3050 1/min	-
Power consumption	5 W	-	7 W	-
Power consumption	120 W	195 W	135 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61000-6-3	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61000-6-2	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Electromagnetic compatibility	-	EN 61800-3	-	-
Insulation class	F	H	F	-
Protection class	IPX4D	IPX4D	IPX4D	-
Materials
Bearing	Carbon-graphite	Carbon-graphite	Carbon-graphite	-
Pipe connection
Inlet connection	G 2	G 2	G 2	G 2
PN connection on suction side	PN 10	PN 10	PN 10	PN 10
Outlet connection	G 2	G 2	G 2	G 2
PN connection on discharge side	PN 10	PN 10	PN 10	PN 10
Dimension, weight
Length with packaging	300 mm	270 mm	400 mm	-
Length	203 mm	180 mm	335 mm	-
Height with packaging	394 mm	215 mm	263 mm	-
Height	224 mm	236 mm	180 mm	-
Width with packaging	200 mm	178 mm	300 mm	-
Width	105 mm	176 mm	210 mm	-
Gross weight, approx.	5.9 kg	5.5 kg	8.3 kg	-
Net weight, approx.	4.6 kg	5 kg	7.2 kg	-
Ordering information
Product description	Yonos MAXO 30/0,5-7 PN 10	TOP-S 30/7 (1~230 V, PN 10)	Stratos MAXO 30/0,5-6 PN 10	V 333 R 1-f
Brand	Wilo	Wilo	Wilo	Lowara/Xylem
EAN number	4048482235899	4016322709565	4048482699424	-
Article number	2120642	2048322	2164573	-

Data sheet

Description
Product description	V 333 R 1-f
Brand	Lowara/Xylem
Port-to-port length l0	180 mm

Motor data
Phases	1
Mains connection	1~230 V, 50 Hz

Pipe connection
Inlet connection	G 2
PN connection on suction side	PN 10
Outlet connection	G 2
PN connection on discharge side	PN 10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.