|
|
| Product design type | Glandless premium smart twin-head pump | Existing pump |
| | |
| | |
| | |
| Description | |
| Product description | Stratos MAXO-D 50/0,5-8 PN 6/10 | AT 50/4-90 |
| Article number | 2164653 | - |
| Series | Wilo-Stratos MAXO-D | - |
| Mains connection | 1~230 V ±10%, 50/60 Hz | - |
| Port-to-port length l0 | 240 mm | 280 mm |
| Pump connection | DN 50 | - |
| Display | Graphic colour display (4.3 inches) | - |
| Comment | Fits with fitting piece accessories without any modification of piping
Check electrical connection | - |
| Fitting piece (PN10/16) | 2 x 110623190
Intermediate flange pieces F 3, DN 50x20mm, PN 10/16 | - |
| Result summary | |
| Function | |
| Control mode | Δp-v for variable differential pressure | - |
| Δp-c for constant differential pressure | - |
| Q limit for limiting the maximum volume flow | - |
| Dynamic Adapt plus | - |
| ΔT-const. for constant differential temperature control | - |
| T-const. for constant temperature control | - |
| Constant Q for constant volume flow control | - |
| Multi Flow Adaptation | - |
| Δ T-const. for constant differential temperature control | - |
| User-defined PID control | - |
| Constant speed (n-const.) | - |
| Special features of the series | Heating/Cooling switching | - |
| Night set back | - |
| Heat quantity measurement | - |
| Cooling quantity measurement | - |
| Key locking function | - |
| No-Flow Stop | - |
| Reset function to factory setting | - |
| Adjustable volume flow limiter | - |
| Ability to save and restore configured pump settings (3 restoration points) | - |
| Fault message and warning message in plain text including suggested remedy | - |
| Multi pump operation | Main/Standby | - |
| Parallel operation | - |
| Measurement value logging | Heat and cooling capacity measurement | - |
| Display | Setpoint | - |
| Actual delivery head | - |
| Actual volume flow | - |
| Actual power consumption | - |
| Energy consumption | - |
| Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor) | - |
| Warning messages in plain text (display status: yellow) | - |
| Error messages in plain text (display: red) | - |
| Pump venting (display status: blue) | - |
| Control mode | - |
| Active influences (e.g. STOP) | - |
| Display (can also be selected) | Speed | - |
| Heating quantity | - |
| Cooling quantity | - |
| Operating hours | - |
| Mains voltage | - |
| Warning message | - |
| Error message | - |
| Pump venting function | Yes | - |
| Dry-running detection | yes | - |
| Equipment | |
| Thermal insulation shell | No | - |
| Cold water insulation shell | No | - |
| Quick electrical connection | Wilo Connector | - |
| Blocking-current proof motor | yes | - |
| Particle filter | yes | - |
| Key lock | yes | - |
| Fluid temperature sensor | Integrated | - |
| Connectivity | |
| Analogue signal as standard | 0-10 V | - |
| 2-10 V | - |
| 4-20 mA | - |
| 0-20 mA | - |
| PT1000 | - |
| Digital output | SSM | - |
| SBM | - |
| Digital input | Ext. OFF | - |
| Ext. MIN | - |
| Ext. MAX | - |
| MANUAL (BMS-OFF) | - |
| Key lock | - |
| Switchover between heating/cooling mode | - |
| Bus communication via additional accessories | BACnet MS/TP | - |
| LON | - |
| Modbus RTU | - |
| CANopen | - |
| PLR | - |
| BACnet IP | - |
| Modbus TCP | - |
| Access via the Wilo-Assistant app | Yes | - |
| Connection for Wilo-Smart Cloud | Via Wilo-Smart Gateway | - |
| wire data exchange and remote operation | Bluetooth | - |
| Motor data | |
| Phases | 1 | 3 |
| Mains connection | 1~230 V, 50/60 Hz | 3~400 V, 50 Hz |
| Energy efficiency index (EEI) | ≤0.17 | - |
| Min current Imin | 0.2 A | - |
| Max current Imax | 1.72 A | - |
| Rated power P2 | 327 W | - |
| Min. speed nmin | 650 1/min | - |
| Max. speed nmax | 3800 1/min | - |
| Power consumption P1 min | 10 W | - |
| Power consumption P1 max | 390 W | - |
| Emitted interference | EN 61800-3;2004+A1;2012 /residential area (C1) | - |
| Interference resistance | EN 61800-3;2004+A1;2012 /industrial environment (C2) | - |
| Insulation class | F | - |
| Protection class | IPX4D | - |
| Materials | |
| Material | Grey cast iron | - |
| Impeller | PPS-GF40 | - |
| Shaft | 1.4028, DLC-coated | - |
| Bearing | Carbon, antimony-impregnated | - |
| Pipe connection | |
| Inlet connection | DN 50 | DN 50 |
| PN connection on suction side | PN 6/10 | PN 10 |
| Outlet connection | DN 50 | DN 50 |
| PN connection on discharge side | PN 6/10 | PN 10 |
| Dimension, weight | |
| Length with packaging | 800 mm | - |
| Length L | 240 mm | - |
| Height with packaging | 394 mm | - |
| Height H | 393 mm | - |
| Width with packaging | 600 mm | - |
| Width W | 490 mm | - |
| Gross weight, approx. m | 41.1 kg | - |
| Net weight, approx. m | 36.6 kg | - |
| Ordering information | |
| Product description | Stratos MAXO-D 50/0,5-8 PN 6/10 | AT 50/4-90 |
| Brand | Wilo | Lowara/Xylem |
| EAN number | 4048482699950 | - |
| Article number | 2164653 | - |
