Condensate lifting unit for collecting and pumping condensate from condensing boilers, cooling systems and air-conditioning systems.
Equipment and function
- AC motor 230 V, 65 W (P1), with thermal overload protection, IP24 rating, operating mode S3 40%
- Collection tank with 2.3 l collection volume, 0.9 l usable volume, 2 inlet openings, diameter 28 mm with strainer basket
- Overflow connection for drainage in the event of backflow in the tank
- Special tank base design and hydraulics with large passageway
- Non-return valve can be inserted in the discharge line
- Built-in alarm switch for connecting an alarm system
- Fully automatic control via built-in float switch
- All components that come in contact with the fluid made of particularly resistant materials (plastic and stainless steel; resistant to a pH value of 2.7)
- 3 m mains connection cable with shockproof plug
- 6 m PVC pressure hose Ø i/ Ø o 10/14 mm
- Fixation materials for alternative wall fixation are included in the scope of delivery.
- System designed especially for particularly quiet operation. VDE-tested system.
- Performance data:
- Dimensions (h x w x d): 203 x 250 x 155 mm
- Weight: 2.5 kg
- Max. fluid temperature: 40 °C
Use is permitted without a neutralisation system in combination with gas condensing boilers with an output of up to 200 kW.
Condensates from heating oil furnaces should always be neutralised (this also applies to the use of low-sulphur EL heating oil in accordance with DIN 51603-1, as pH values between 2.2-4.2 can occur here).
The requirements of the ATV DVWK-A251 worksheet and the minimum permissible pH value must be observed in connection with the system.
Scope of delivery
- Condensate lifting unit with built-in float switch
- 3 m electric cable with shockproof plug
- 6 m PVC pressure hose Ø i/ Ø o 10/14 mm
- Fixation material for wall fixation
- Installation and operating instructions
