Wilo-Trennsystem Basic

Automatic drinking water separation system

The drinking water separation system is designed for applications where a hygienically clean separation of public water supplies is required:

• Animal drinking troughs
• Sports ground irrigation
• Garden irrigation

Ready for connection module with compact design, consisting of:

• HiMulti 3 P self-priming centrifugal pump, mounted on a base frame with oscillation absorbers
• 11 l replenishment reservoir for fresh water replenishment with float valve
• Connection on the discharge side, Rp 1" hose
• Connection for municipal water supply network R ¾"
• 1.5 m mains connection cable and plug
• Electronic control device with integrated switch-off quantity detection and dry-running protection

• Mains connection: 1~230 V, 50 Hz
• IP rating: IPX4
• Insulation class: F
• Rated speed: 2900 rpm
• Motor with integrated thermal motor protection probe
• Max. volume flow: 4.5 m³/h
• Max. operating pressure: 8 bar
• Triggering pressure: 1.5 bar
• Max. fluid temperature: +5 °C to +30 °C
• Max. ambient temperature: +5 °C to +40 °C
• Break tank volume: 11 litres
• Nominal connection diameters:
  • Discharge port: G 1" thread, union nut
  • Suction connection G 3/4" male thread
• Overflow:
  • Operational overflow: Hose nipple Ø 19-21
  • Emergency overflow: free discharge according to EN 1717, liquid category 5

• Technopolymer pump housing
• Shaft 1.4021 stainless steel
• Impeller PPE/PS-GF30
• Ceramic / carbon mechanical seal

Automatic drinking water separation system as a compact module for potable water and non-potable water in accordance with EN 1717 liquid category 5.

All parts that come into contact with the fluid are corrosion-proof.

• Ready-for-connection system with fixation material
• Installation and operating instructions
• "Protect from frost" sticker
• "Not drinking water" sticker

• Overflow signalling device
• Cover cap made of EPP

• Mains connection: 1~230 V, 50 Hz
• IP rating: IPX4
• Insulation class: F
• Rated speed: 2900 rpm
• Motor with integrated thermal motor protection probe
• Max. volume flow: 4.5 m³/h
• Max. operating pressure: 8 bar
• Triggering pressure: 1.5 bar
• Max. fluid temperature: +5 °C to +30 °C
• Max. ambient temperature: +5 °C to +40 °C
• Break tank volume: 11 litres
• Nominal connection diameters:
  • Discharge port: G 1" thread, union nut
  • Suction connection G 3/4" male thread
• Overflow:
  • Operational overflow: Hose nipple Ø 19-21
  • Emergency overflow: free discharge according to EN 1717, liquid category 5

• Technopolymer pump housing
• Shaft 1.4021 stainless steel
• Impeller PPE/PS-GF30
• Ceramic / carbon mechanical seal

Automatic drinking water separation system as a compact module for potable water and non-potable water in accordance with EN 1717 liquid category 5.

All parts that come into contact with the fluid are corrosion-proof.

• Ready-for-connection system with fixation material
• Installation and operating instructions
• "Protect from frost" sticker
• "Not drinking water" sticker

• Overflow signalling device
• Cover cap made of EPP