Rexa CUT GE03.20/P-T15-2-540X 20m

Data sheet

Operating data
  • Max. delivery head H
    20.00 m
  • Max. volume flow Q
    18.5 m³/h
  • Optimal volume flow Qopt
    18.5 m³/h
  • Optimal delivery head Hopt
    20 m
  • Pressure port
    DN 32/40
  • Nominal flange diameter
    DN 32/40
  • Output connection standard
    -
  • Maximum operating pressure p
    10 bar
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-30 min
  • Max. immersion depth
    20.00 m
  • Max. fluid temperature T
    40 °C
  • Min. fluid temperature T
    3 °C
  • Gross weight, approx. m
    49.4 kg
Unit
  • Maximum operating pressure p
    10 bar
  • Max. immersion depth
    20.00 m
  • Min. fluid temperature T
    3 °C
  • Max. fluid temperature T
    40 °C
Motor data
  • Mains connection
    3~400 V, 50 Hz
  • Voltage tolerance
    ±10 % %
  • Rated current IN
    3.60 A
  • Starting current I
    20 A
  • Power factor cos φ
    0.84
  • Activation type
    Direct online (DOL)
  • Max. switching frequency t
    50 1/h
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-30 min
  • Protection class motor
    IP68
  • Power consumption P1 max
    2100 W
  • Rated power P2
    1.50 kW
Equipment/function
  • Explosion protection type
    ATEX
  • Motor protection
    Bimetallic
  • Macerator
    yes
  • Motor, leakage detection
    yes
  • Sealing chamber, leakage detection
    optional
  • Leakage chamber, leakage detection
    no
Cable
  • Connection cable length
    20.0 m
  • Cable type
    H07RN-F
  • Cable cross-section
    7G1,5 mm²
Materials
  • Pump housing
    5.1301, EN-GJL-250
  • Impeller
    5.1301, EN-GJL-250
  • Shaft
    1.4401, X5CrNiMo17-12-2
  • Gasket material
    NBR
  • Motor housing
    5.1301, EN-GJL-250
Installation dimensions
  • Pipe connection on the suction side
    -
  • Pipe connection on the pressure side
    DN 32/40
Information for order placements
  • Brand
    Wilo
  • Product description
    Rexa CUT GE03.20/P-T15-2-540X 20m
  • Net weight, approx. m
    47 kg
  • Article number
    6080435
Product data
  • Maximum operating pressure PN
    2 bar
  • Max. fluid temperature T
    40 °C
  • Min. fluid temperature T
    3 °C
  • Max. ambient temperature T
    40 °C

Dimensions and dimensions drawings

Wilo-Rexa CUT GE03.20.. - portable wet well installation

Wilo-Rexa CUT GE03.20.. - portable wet well installation
Wilo-Rexa CUT GE03.20.. - portable wet well installation

Pump curves

Wilo-Rexa CUT GI/GE — 50 Hz — No. of poles: 2

Wilo-Rexa CUT GI/GE — 50 Hz — No. of poles: 2

Pump curves in accordance with ISO 9906, class 3B. The specified degrees of efficiency correspond to the hydraulic efficiency.

Wilo-Rexa CUT GI/GE — 50 Hz — No. of poles: 2

Ordering information

Information for order placements
  • Brand
    Wilo
  • Product description
    Rexa CUT GE03.20/P-T15-2-540X 20m
  • EAN number
    4048482698243
  • Article number
    6080435
  • Gross weight, approx. m
    49.4 kg
  • Net weight, approx. m
    47 kg
  • Overall length L
    265.0 mm
  • Height without packaging H
    455 mm
  • Colour
    Green
  • Packaging property
    Transport packaging
  • Packaging type
    Cardboard box
  • Number per layer
    1
  • Width without packaging L
    215.0 mm
  • Minimum order quantity
    1
  • Pieces per pallet
    1

Tender text

Fully submersible sewage pump with external macerator for vertical wet well installation for pumping wastewater and sewage containing faeces (in the scope of validity of EN 12050-1), also with long-fibre components. Unit is completely made of cast iron, seal made of two independent mechanical seals on pump and motor sides. Pressure connection with horizontal discharge port and thread/flange connection. Surface-cooled motor in three-phase current version with thermal motor monitoring, sealing chamber and Ex rating. Connection cable with bare cable end.

Operating data
  • Fluid media
    Water
  • Max. delivery head H
    20.00 m
Product data
  • Maximum operating pressure PN
    2 bar
  • Max. immersion depth
    20.00 m
  • Min. fluid temperature T
    3 °C
  • Max. fluid temperature T
    40 °C
Motor data
  • Motor design
    Submersible motor – air-cooled
  • Mains connection
    3~400 V, 50 Hz
  • Voltage tolerance
    ±10 % %
  • Power factor cos φ
    0.84
  • Rated power P2
    1.50 kW
  • Power consumption P1 max
    2100 W
  • Rated current IN
    3.60 A
  • Starting current I
    20 A
  • Activation type
    Direct online (DOL)
  • No. of poles
    2
  • Max. switching frequency t
    50 1/h
  • Insulation class
    F
  • Protection class
    IP68
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-30 min
Cable
  • Connection cable length
    20.0 m
  • Cable type
    H07RN-F
  • Cable cross-section
    7G1,5 mm²
Equipment/function
  • Macerator
    yes
  • Explosion protection type
    ATEX
  • Motor protection
    Bimetallic
  • Motor, leakage detection
    yes
  • Sealing chamber, leakage detection
    optional
  • Leakage chamber, leakage detection
    no
Materials
  • Pump housing
    5.1301, EN-GJL-250
  • Macerator
    1.4034, X46Cr13
  • Impeller
    5.1301, EN-GJL-250
  • Shaft
    1.4401, X5CrNiMo17-12-2
  • Gasket material
    NBR
  • Motor housing
    5.1301, EN-GJL-250
Installation dimensions
  • Pipe connection on the suction side
    -
  • Pipe connection on the pressure side
    DN 32/40
Information for order placements
  • Brand
    Wilo
  • Product description
    Rexa CUT GE03.20/P-T15-2-540X 20m
  • Net weight, approx. m
    47 kg
  • Article number
    6080435

Downloads

Wilo-Rexa CUT GE

Article Number 6069819
Edition 2019-02
Version number 03
Page format 209.9 x 297.0 mm
Number of pages 1148

PDF (9 MB)

Download

REACH Regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

PDF: Rexa CUT GE03.20/P-T15-2-540X 20m

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download