Rexa PRO C08DA-436/EAD1X2-T0050-540-O

Data sheet

Operating data
  • Max. delivery head H
    28.40 m
  • Max. volume flow Q
    68.4 m³/h
  • Optimal volume flow Qopt
    68.4 m³/h
  • Optimal delivery head Hopt
    28.4 m
  • Pressure port
    DN 80
  • Nominal flange diameter
    DN 80
  • Output connection standard
    EN 1092-2
  • Maximum operating pressure PN
    3.10 bar
  • Free ball passage of the hydraulics
    65 mm
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-30 min
  • Max. immersion depth
    20.00 m
  • Max. fluid temperature T
    40 °C
  • Min. fluid temperature T
    3 °C
  • Gross weight, approx. m
    71.0 kg
Unit
  • Max. immersion depth
    20.00 m
  • Min. fluid temperature T
    3 °C
  • Max. fluid temperature T
    40 °C
Motor data
  • Mains connection
    3~400 V, 50 Hz
  • Voltage tolerance
    ±10 % %
  • Rated current IN
    9.80 A
  • Starting current I
    52 A
  • Power factor cos φ
    0.89
  • Activation type
    Direct online (DOL)
  • Max. switching frequency t
    50 1/h
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-30 min
  • Protection class motor
    IP68
  • Power consumption P1 max
    6100 W
  • Rated power P2
    5.00 kW
Equipment/function
  • Explosion protection type
    ATEX
  • Motor protection
    Bimetallic
  • Macerator
    no
  • Motor, leakage detection
    yes
  • Sealing chamber, leakage detection
    optional
  • Leakage chamber, leakage detection
    no
Cable
  • Connection cable length
    10.0 m
  • Cable type
    H07RN-F
  • Cable cross-section
    7G1,5 mm²
Materials
  • Pump housing
    5.1301, EN-GJL-250
  • Impeller
    5.1301, EN-GJL-250
  • Shaft
    1.4021, X20Cr13
  • Gasket material
    NBR
  • Motor housing
    5.1301, EN-GJL-250
Installation dimensions
  • Pipe connection on the suction side
    DN 80
  • Pipe connection on the pressure side
    DN 80
Information for order placements
  • Brand
    Wilo
  • Product description
    Rexa PRO C08DA-436/EAD1X2-T0050-540-O
  • Net weight, approx. m
    69 kg
  • Article number
    6078153
Product data
  • Maximum operating pressure PN
    3 bar
  • Max. fluid temperature T
    40 °C
  • Min. fluid temperature T
    3 °C
  • Max. ambient temperature T
    40 °C
  • Free ball passage of the hydraulics
    65 mm

Dimensions and dimensions drawings

Wilo-Rexa PRO C08-43.. - portable wet well installation

Wilo-Rexa PRO C08-43.. - portable wet well installation
Wilo-Rexa PRO C08-43.. - portable wet well installation

Pump curves

Wilo-Rexa PRO C08-43.. — 50 Hz — No. Of poles: 2

Wilo-Rexa PRO C08-43.. — 50 Hz — No. Of poles: 2

Pump curves in accordance with ISO 9906, class 2B, paragraph 4.2.2. The specified degrees of efficiency correspond to the hydraulic efficiency.

Wilo-Rexa PRO C08-43.. — 50 Hz — No. Of poles: 2

Ordering information

Information for order placements
  • Brand
    Wilo
  • Product description
    Rexa PRO C08DA-436/EAD1X2-T0050-540-O
  • EAN number
    4048482617121
  • Article number
    6078153
  • Gross weight, approx. m
    71.0 kg
  • Net weight, approx. m
    69 kg
  • Overall length L
    235.0 mm
  • Height without packaging H
    525 mm
  • Colour
    Green
  • Packaging property
    Transport packaging
  • Packaging type
    One-way pallet
  • Number per layer
    1
  • Width without packaging L
    268.0 mm
  • Minimum order quantity
    1
  • Pieces per pallet
    1

Tender text

Fully submersible sewage pump for stationary and transportable wet well installation for pumping wastewater and sewage containing faeces (within the scope of validity of (DIN) EN 12050-1). Unit made completely of cast iron. The sealing on the fluid and on the motor side is performed by two bidirectional mechanical seals. Surface-cooled motor in three-phase current version with sealing chamber, thermal motor monitoring and Ex rating. Detachable connection cable with longitudinally watertight cable inlet and bare cable end.

Operating data
  • Fluid media
    Water
  • Max. delivery head H
    28.40 m
Product data
  • Free ball passage of the hydraulics
    65 mm
  • Maximum operating pressure PN
    3.10 bar
  • Max. immersion depth
    20.00 m
  • Min. fluid temperature T
    3 °C
  • Max. fluid temperature T
    40 °C
Motor data
  • Motor design
    Submersible motor – air-cooled
  • Mains connection
    3~400 V, 50 Hz
  • Voltage tolerance
    ±10 % %
  • Power factor cos φ
    0.89
  • Rated power P2
    5.00 kW
  • Power consumption P1 max
    6100 W
  • Rated current IN
    9.80 A
  • Starting current I
    52 A
  • Activation type
    Direct online (DOL)
  • No. of poles
    2
  • Max. switching frequency t
    50 1/h
  • Insulation class
    F
  • Protection class
    IP68
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-30 min
Cable
  • Connection cable length
    10.0 m
  • Cable type
    H07RN-F
  • Cable cross-section
    7G1,5 mm²
Equipment/function
  • Macerator
    no
  • Explosion protection type
    ATEX
  • Motor protection
    Bimetallic
  • Motor, leakage detection
    yes
  • Sealing chamber, leakage detection
    optional
  • Leakage chamber, leakage detection
    no
Materials
  • Pump housing
    5.1301, EN-GJL-250
  • Impeller
    5.1301, EN-GJL-250
  • Shaft
    1.4021, X20Cr13
  • Gasket material
    NBR
  • Motor housing
    5.1301, EN-GJL-250
Installation dimensions
  • Pipe connection on the suction side
    DN 80
  • Pipe connection on the pressure side
    DN 80
Information for order placements
  • Brand
    Wilo
  • Product description
    Rexa PRO C08DA-436/EAD1X2-T0050-540-O
  • Net weight, approx. m
    69 kg
  • Article number
    6078153

Downloads

Wilo-Rexa PRO

Article Number 6063548
Edition 2019-02
Version number 07
Page format 209.9 x 297.0 mm
Number of pages 1244

PDF (11 MB)

Download

Wilo-Rexa PRO

Article Number 6069824
Edition 1709
Version number 08
Page format 209.9 x 297.0 mm
Number of pages 8

PDF (357 kB)

Download

REACH Regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

PDF: Rexa PRO C08DA-436/EAD1X2-T0050-540-O

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download