Wilo-DrainLift WS 40/50 Basic | Wilo

Wilo-DrainLift WS 40/50 Basic

Your advantages
DrainLift 40/50 Basic

Your advantages

  • Pressure-tight pump chamber for subterranean and aboveground installation
  • Flexible due to free selection of inlets
  • Large tank volume
  • Including pipework, level control, switchgear and pump
Series description
Wilo-DrainLift WS 40/50 Basic

Design

Pump chamber made of plastic with integrated pump as concealed pumping station or floor-mounted lifting unit

Application

Pumping of sewage without faeces that cannot be returned to the sewer system using natural falls and for the draining of objects that are below the backflow level.

Equipment/function

Pump chamber complete ready for connection with pipework and pump.

Typekey

Example:

Wilo-DrainLift WS 40E/TC40 (3~)-BV

WS

Synthetic pumping station

40

Pressure outlet of the system

E

E = single-pump system D = double-pump system

TC 40

Built-in pump

(3~)

Three-phase current motor

BV

non-return ball valve

Technical data

  • Inlet: DN 100/DN 150
  • Ventilation: DN 70
  • Maximum pressure in the pressure pipe: 1.5 bar.

Materials

  • Pump chamber: PE
  • Pipework: 1.4404
  • Surface coupling: PUR
  • Non-return ball valve: Cast iron
  • Gate valve: bronze
  • Pump: Cast iron

Construction

The Wilo-DrainLift WS 40 Basic is an automatic lifting unit as a single-pump or double-pump system. The plastic shaft has integrated finning for increasing stiffness and anti-buoyancy, and also provides freely-definable inlets.

The system can be installed in buildings as a lifting unit, as well as outside buildings like a traditional pump chamber in the ground.

Technical data

  • Inlet: DN 100/DN 150
  • Ventilation: DN 70
  • Maximum pressure in the pressure pipe: 1.5 bar.

Pump

The submersible sewage pump Wilo-Drain TC 40 is preinstalled.

Delivery state

  • Tank (for single or double-pump system)
  • Built-in pipework
  • Non-return ball valve
  • Including pump
  • Level switching
  • Switchgear (for three-phase pump or double-pump system)
  • Cover with seal (can be walked on, supporting a weight up to 200 kg)
  • Hole saw Ø 124 mm, inlet seal DN 100 (for pipe Ø 110 mm)
  • 1 PVC hose section Ø 50 mm with clamps for connection of a diaphragm hand pump
  • Fixation material for floor fixation
  • Installation and operating instructions
Downloads

Installation and operating instructions

Wilo-DrainLift WS 40/50 Basic

Article Number 6087354
Edition 05
Page format 209.9 x 297.0 mm
Number of pages 128
PDF (5 MB)

General overview (Documents)

General overview 2019 International version

Article Number 2200591
Edition 2018
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (40 MB)

General overview 2021 International version

Edition 2020
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (10 MB)

Certification booklet

Wilo-Drainlift WS 40/50#Wilo-DrainLift WS 40/50 Basic

Article Number 6069562
Edition 2021-07
Page format 209.9 x 297.0 mm
Number of pages 72
PDF (4 MB)

Certificate REACH (Documents)

REACH regulation

Edition 2020-08
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (158 KB)