Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Rexa PRO C08DA-413/EAD0X2-M0015-523-O | Wilo

Rexa PRO C08DA-413/EAD0X2-M0015-523-O

Article number: 6078836
Technical data
Hydraulic data
Maximum operating pressure p 1.35 bar
Discharge port DN 80
Free ball passage of the hydraulics 55 mm
Impeller type Single-channel impeller
Max. immersion depth 20 m
Max. delivery head Hmax 12.2 m
Max. volume flow Qmax 78.1 m³/h
Min. fluid temperature Tmin 3 °C
Max. fluid temperature Tmax 40 °C
Min. ambient temperature Tmin 3 °C
Max. ambient temperature Tmax 40 °C
Motor data
Motor Identifier P 13.1-08/EAD0X2-M Ex 1,5kW
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 1.5 kW
Power consumption P1 max 2.10 kW
Rated current IN 9.3 A
Starting current I 29 A
Operating mode (immersed) S1
Operating mode (non-immersed) S2-30 min
Rated speed n 2852 1/min
Power factor cos φ100 0.98
Activation type Direct On Line (DOL)
Number of poles 2
Max. switching frequency t 60 1/h
Insulation class F
Protection class motor IP68
Cable
Connection cable length L 10 m
Cable type H07RN-F
Cable cross-section 7G1,5 mm²
Type of connection cable Detachable
Equipment/function
Mains plug no
Float switch no
Macerator no
Explosion protection type ATEX
Motor protection Bimetall
Motor, leakage detection yes
Sealing chamber, leakage detection optional
Leakage chamber, leakage detection no
Materials
Pump housing Grey cast iron
Impeller Ductile cast iron
Shaft Stainless steel
Sealing on pump side Silicon carbide
Sealing on motor side NBR
Gasket material NBR
Motor housing Grey cast iron
Installation dimensions
Inlet connection DN 80
Outlet connection DN 80

Wilo-Rexa PRO C08-41.. - portable wet well installation

Product data
Brand Wilo
Product description Rexa PRO C08DA-413/EAD0X2-M0015-523-O
Article number 6078836
EAN number 4048482639949
Colour Green
Minimum order quantity 1
Date of sales availability 2016-03-01
Packaging
Packaging type One-way pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 400 mm
Length L 239 mm
Height with packaging 935 mm
Height H 525 mm
Width with packaging 600 mm
Width W 269 mm
Gross weight, approx. m 53 kg
Net weight, approx. m 51 kg
Tender text

Fully submersible sewage pump for stationary and transportable wet well installation for pumping wastewater and sewage containing faeces (within the scope of validity of (DIN) EN 12050-1). Unit made completely of cast iron. The sealing on the fluid and on the motor side is performed by two bidirectional mechanical seals. Surface-cooled motor in alternating current design with sealing chamber, thermal motor monitoring and leakage detection for the motor compartment and Ex rating. Detachable connection cable with longitudinally watertight cable inlet, capacitor box and bare cable end.

Operating Data
Product data
Impeller type Single-channel impeller
Free ball passage of the hydraulics 55 mm
Maximum operating pressure PN 1 bar
Max. immersion depth 20 m
Fluid temperature T 3 °C
Motor data
Motor design Submersible motor – surface-cooled
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±10 %
Power factor cos φ100 0.98
Rated power P2 1.5 kW
Power consumption P1 max 2.10 kW
Rated current IN 9.3 A
Starting current I 29 A
Activation type Direct On Line (DOL)
Number of poles 2
Rated speed n 2852 1/min
Max. switching frequency t 60 1/h
Insulation class F
Protection class IP68
Operating mode (immersed) S1
Operating mode (non-immersed)
  • S2-30 min
  • S3-25%
Cable
Connection cable length L 10 m
Cable type H07RN-F
Cable cross-section 7G1,5 mm²
Mains plug no
Type of connection cable Detachable
Equipment/function
Float switch no
Macerator no
Explosion protection type ATEX
Motor protection Bimetall
Motor, leakage detection yes
Sealing chamber, leakage detection optional
Leakage chamber, leakage detection no
Materials
Pump housing Grey cast iron
Impeller Ductile cast iron
Shaft Stainless steel
Sealing on pump side QQPGG
Sealing on motor side BXPFF
Gasket material NBR
Motor housing Grey cast iron
Installation dimensions
Pipe connection on the suction side DNs DN 80
Pipe connection on the discharge side DNd DN 80
Ordering information
Brand Wilo
Product description Rexa PRO C08DA-413/EAD0X2-M0015-523-O
Net weight, approx. m 51 kg
Article number 6078836
Documents

Installation and operating instructions

Wilo-Rexa PRO

Article Number 6063548
Edition 2019-02
Page format 209.9 x 297.0 mm
Number of pages 48
PDF (3 MB)

Certification booklet

Wilo-Rexa PRO

Article Number 6069824
Edition 2022-11
Page format 209.9 x 297.0 mm
Number of pages 32
PDF (14 MB)

Wilo-RexaNorm RE, Wilo-Rexa NORM, Wilo-RexaNorm RE (Bare shaft), Wilo-Rexa NORM (Bare shaft)

Article Number 6074550
Edition 2022-11
Page format 209.9 x 297.0 mm
Number of pages 40
PDF (13 MB)

BIM/CAD

3D_DWG

PRO C08DA-413/EAD0X2-M0015-523-O

DWG (719 KB)

3D_STEP

PRO C08DA-413/EAD0X2-M0015-523-O

STP (990 KB)

2D_DWG_TOP

PRO C08DA-413/EAD0X2-M0015-523-O

DWG (16 KB)

2D_DWG_FRONT

PRO C08DA-413/EAD0X2-M0015-523-O

DWG (17 KB)

2D_DWG_RIGHT

PRO C08DA-413/EAD0X2-M0015-523-O

DWG (18 KB)

Accessory

Level control with float switch (17)

Level control with level sensor (20)

Level control with dynamic pressure system (9)

Mains-independent alarm signal (6)

Stationary wet installation DN 80 (13)

Portable wet installation DN 80 (10)

Fittings (6)

Hoses / hose joints (31)

Installation/setup (40)

Pipes/pipe joints (5)

Pump chamber (1)

Pump control (12)

Pump control/accessories (8)

Alarm signal (7)

Cable (2)

Cable distribution (1)

Level control (26)

Level control/accessories (8)

Motor protection (3)

Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Commissioning
Commissioning Drainage pumps
    
2219491

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.)
  • Functional check of fitted system(s)
  • Practice-oriented operation instruction
  • Wilo commissioning protocol

The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.

Wilo-Live Assistant
Wilo-Live Assistant Service
    
2216415

The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems!

The Wilo-Live Assistant includes:

  • Interactive live support via video chat
  • Direct contact with an expert
  • Just-in-time solution to ensure maximum operational reliability of your pumps and systems
Maintenance
Maintenance BASIC Drainage pumps
    
2219540

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance COMFORT Drainage pumps
    
2219514

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during normal service hours)

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance PREMIUM Drainage pumps
    
2219567

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Checking the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during and outside normal service hours)
  • Software updates
  • Includes wearing parts

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

More suitable services

Service packages
Service Package L Drainage pumps