Catalogue creation
My favorites
Product comparison
Stratos GIGA2.0-D 50/1-13/0,75 | Wilo

Stratos GIGA2.0-D 50/1-13/0,75

Article number: 2205618
Technical data
Tender text

High-efficiency in-line pump with EC motor of energy efficiency class IE5 in accordance with IEC 60034-30-2, hydraulics with minimum efficiency index MEI ≥ 0.7 and electronic power adjustment in glanded pump construction. The pump is configured as a single-stage low-pressure centrifugal pump with flange connection and mechanical seal. The Stratos GIGA2.0-D has been predominantly designed for pumping heating water (acc. to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, air-conditioning and cooling systems.


  • Single-stage low-pressure centrifugal pump with one-piece shaft in monobloc design
  • Spiral housing in in-line design (suction and discharge ports with the same flanges in a line)
  • PN 16 flange – in accordance with EN 1092-2
  • Pressure measuring connections (R 1/8) for mounted differential pressure sensor (version ...-R1 without differential pressure sensor)
  • Pump housing and motor flange with cataphoretic coating as standard
  • Mechanical seal for pumping water up to Tmax. = +140 °C. A glycol admixture of 20 % to +40 % by volume is permitted up to T ≤ +40 °C. An alternative mechanical seal must be provided in water-glycol mixtures with glycol proportions > 40 % up to max. 50 % by volume and a fluid temperature of > +40 °C up to max. +120 °C or fluids other than water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
  • Connection voltages:
    • 3~440 V ±10 % 50/60 Hz; 3~400 V ±10 % 50/60 Hz; 3~380 V -5 % +10 % 50/60 Hz
    • Version M-: 1~220 V … 240 V (±10%), 50/60 Hz
  • Compliance with electromagnetic compatibility without additional measures
    • Interference emission for residential environment according to EN 61800-3:2018
    • Interference immunity for industrial environments according to EN 61800-3:2018

Control modes:

  • Permanent, automatic performance adjustment to system requirements without setpoint specification Wilo Dynamic Adapt plus (factory setting).
  • Constant temperature (T-const.)
  • Constant differential temperature (dT-const.)
  • Needs-based volume flow optimisation of the feeder pump through connectivity and communication between multiple secondary pumps (Multi-Flow Adaptation).
  • Constant volume flow (Q-const.)
  • Variable differential pressure (dp-v) with the option to set the nominal duty point Q and H
  • Constant differential pressure (dp-c)
  • Differential pressure control (dp-c) to a remote point in the pipe network (index circuit evaluator)
  • Constant speed (n-const.)
  • User-defined PID control


  • Selection of the field of application in the setting assistant
  • Heat quantity measurement
  • Cooling quantity measurement
  • Adjustable volume flow limiter using the Q-Limit function (Qmin. and Qmax.)
  • Operating modes of twin-head pump: Main/standby operation, efficiency-optimised parallel operation for dp-c and dp-v
  • Pump automatically deactivates when no flow is detected (No-Flow Stop)
  • Switchover between heating and cooling mode (automatic, external or manual)
  • Ability to save and restore configured pump settings (3 restoration points)
  • Display of current duty point in the hydraulic duty chart
  • Correction of viscous fluids via adjustment of viscosity and density
  • Fault and warning messages shown in plain text with advice on resolving the issue
  • Integrated full motor protection

Display in the "Home screen" of the graphic display:

  • Control mode currently set
  • Current setpoint
  • Current volume flow (only if a differential pressure sensor is connected)
  • Current fluid temperature (only if temperature sensor is connected)
  • Current power consumption
  • Cumulative electric consumption


  • 4 configurable analogue inputs: 0 – 10 V, 2–10 V, 0 – 20 mA, 4 – 20 mA and commercially available PT1000 (only on two analogue inputs); +24 V DC power supply
  • 2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, heating/cooling, manual override (uncoupled from building automation), operation lock (key lock and remote operation configuration protection))
  • 2 configurable signal relays for run signals and fault messages
  • Slot for Wilo-CIF modules with interfaces for building automation (BA) (optional accessories: CIF modules Modbus RTU, BACnet MS/TP, LON, PLR, CAN)
  • Wilo Net as a Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; twin-head pump operation and Wilo-Smart Gateway
  • Automatic emergency operation with definable pump speed for exceptional circumstances, e.g. bus communication or sensor value malfunction
  • Rotatable, graphic colour display (4.3 inches) with one button manual operation level
  • Bluetooth interface via Wilo-Smart Connect module BT
  • Use the Wilo-Assistant app to read and set operating data and –among other things– set up a commissioning protocol through the Bluetooth interface
  • Integrated dual pump management (twin-head pumps are prewired) when using 2 single pumps as twin-head pump unit (connection via Wilo Net)
  • Cable break detection when using an analogue signal (in connection with 2 – 10 V or 4 – 20 mA)
  • Time stamp for error/warnings and historical operating data
  • Continuous operating data memory
  • Standard condensate drainage holes in the motor housing (closed upon delivery)
  • Air vent valve on the lantern

Scope of delivery:

  • Pump
  • Wilo-Smart Connect Module BT
  • Threaded cable glands with sealing inserts
  • Assembly instructions (short version) and declaration of conformity

Accessories must be ordered separately:

3 mounting brackets with fixation material for installation on a base

  • Blind flanges for twin-head pump housing
  • Installation aid for mechanical seal (incl. mounting bolts)
  • For connection to building automation:
    • CIF module PLR
    • CIF module LON
    • CIF module BACnet MS/TP
    • Modbus RTU CIF module
    • CIF module CANopen
    • CIF module Ethernet Multi-protocol (Modbus TCP, BACnet/IP)
    • Connection M12 RJ45 CIF Ethernet
  • Differential pressure sensor DPS 2 ... 10 V
  • Differential pressure sensor DPS 4 ... 20 mA
  • Temperature sensor PT1000 AA
  • Sensor sleeves for the installation of temperature sensors in the pipe
Operating Data
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Min. ambient temperature Tmin 0 °C
Max. ambient temperature Tmax 50 °C
Maximum operating pressure PN 16 bar
Minimum efficiency index (MEI) ≥0.7
Mains connection 3~400 V, 50/60 Hz
Motor efficiency class IE5
Power consumption P1 max 900 W
Rated power P2 0.75 kW
Max current Imax 1.5 A
Max. speed nmax 3270 1/min
Interference emission EN 61800-3
Interference immunity EN 61800-3
Insulation class F
Protection class motor IP55
Motor protection PTC integrated
Pump housing Grey cast iron
Impeller PPS-GF40
Shaft Stainless steel
Shaft seal AQ1EGG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 50
Pipe connection on the discharge side DNd DN 50
Port-to-port length L0 280 mm
Ordering information
Brand Wilo
Product description Stratos GIGA2.0-D 50/1-13/0,75
Net weight, approx. m 71.8 kg
Article number 2205618

Installation and operating instructions

Wilo-Stratos GIGA2.0-I/-D

Article Number 2227296
Edition 2023-08
Page format 209.9 x 297.0 mm
Number of pages 488
PDF (13 MB)

Certification booklet

Wilo-Stratos GIGA2.0-I/-D, Wilo-Stratos GIGA /-D/-B, Wilo-Yonos GIGA2.0-I/-D

Article Number 2216678
Edition 2022-11
Page format 209.9 x 297.0 mm
Number of pages 52
PDF (22 MB)

Certificate REACH

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (262 KB)


Battery transportation information

Page format 209.9 x 297.0 mm
Number of pages 6
PDF (517 KB)


With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Commissioning Glanded pumps

High performance is our strength.

Entrust the Wilo commissioning-service with ensuring a smooth process when implementing new systems in your installations. We will happily accompany you throughout the commissioning process of our products and support you step-by-step. You will benefit directly from the advantages of our products and their performance in operation. Our qualified service technicians will familiarise you with all strengths to guarantee a safe and optimal start.

Why you should take advantage of our commissioning expertise:

The pump is part of a complex supply system, that is why the focus of professional installers during commissioning is primarily on the higher-level system technology. However, the optimal pump settings – as a part of the overall system – are crucial for energy consumption and therefore for the efficiency and operational reliability of the entire system.

The advantage of using professional installers is that they hand over a system to the customer which is energy efficient from the start and they do not have to acquire detailed knowledge of each control and pump series for this. This significantly reduces both energy costs and pump wear. The commissioning service provided by the Wilo service also includes instruction of the responsible building service engineer.