Wilo-Stratos-Z
Wilo-Stratos-Z
Design
Glandless circulating pump with screwed connection or flange connection, EC motor and automatic power adjustment.
Application
Domestic hot water circulation systems of all kinds, hot-water heating systems of all kinds, air-conditioning, closed cooling circuits, industrial circulation systems
Equipment/function
Operating modes
- Manual control mode (n=constant)
- Δp-c for constant differential pressure
- Δp-v for variable differential pressure
- Δp-T for temperature-controlled differential pressure (programmable via IR-Stick, IR-Monitor, Modbus, BACnet, LON or CAN)
- Q limit for limiting the maximum volume flow (setting only via IR-stick)
Manual functions
- Setting the operating mode
- Differential pressure setpoint setting
- Setting automatic setback operation
- Setting the pump ON/OFF
- Setting the speed (manual control mode)
Automatic functions
- Infinitely variable power adjustment according to the operating mode
- Automatic setback operation
- Deblocking function
- Soft start
- Full motor protection with integrated trip electronics
External control functions
- "Overriding Off" control input (possible with Stratos IF-Modules)
- "Overriding Min" control input (possible with Stratos IF-Modules)
- "Analogue In 0 - 10 V" control input (remote speed adjustment) (possible with Stratos IF-Modules)
- "Analogue In 0 - 10 V" control input (remote setpoint adjustment) (possible with Stratos IF-Modules)
Signal and display functions
- Collective fault signal (potential-free NC contact)
- Individual run signal (potential-free NO contact) (possible with Stratos IF-Modules)
- Fault signal light
- LCD display for indication of pump data and fault codes
Data exchange
- Infrared interface for wireless data exchange with IR-Stick/IR-Monitor
- Modbus RTU serial digital interface for connection to building automation BA via RS485 BUS system (possible with Stratos IF-Modules)
- BACnet serial digital interface MS/TP slave for connection to building automation BA via RS485 BUS system (possible with Stratos IF-Modules)
- CAN serial digital interface for connection to building automation BA via CAN BUS system (possible with Stratos IF-Modules)
- LON serial digital interface for connection to a LONWorks network (possible with Stratos IF-Modules)
- PLR serial digital interface for connection to BA via Wilo interface converter or company-specific coupling modules (possible with Stratos IF-Modules)
Dual pump management (double pump or 2 x single pumps)
- Main/standby operation (automatic fault-actuated switchover/time-dependent pump cycling): various combinations with Stratos IF-Modules (accessories) possible
- Parallel operation (efficiency-optimised peak load activation and deactivation): various combinations with Stratos IF-Modules (accessories) possible
Equipment
- Wrench attachment point on pump body (for threaded pipe union pumps with P2≤100 W)
- For flange-end pumps: Flange versions
- Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
- Special version for DN 40 to DN 65 pumps: PN 16 flange (according to EN 1092-2) for PN 16 counter flange,
- Plug-in position for optional extension with Wilo-IF-Modules
- Thermal insulation as standard
Typekey
Example: | Wilo-Stratos-Z 40/1-8 |
Stratos | High-efficiency pump (screw-end or flange-end pump), electronically controlled |
Z | Single pump for domestic hot water circulation |
40/ | Nominal connection diameter |
Technical data
- Permissible temperature range
- Drinking water up to 3.57 mmol/l (20 °dH): 0 °C to +80 °C
- Heating water: -10 °C to +110 °C
- Mains connection 1~230 V, 50/60 Hz
- IP rating IP X4D
- Screwed connection or flange connection (depending on type) Rp 1 to DN 65
- Max. operating pressure, standard version: 6/10 bar (special version: 16 bar)
Materials
- Pump housing made of red brass (30/1-12 and 40/1-8 types, also grey cast iron)
- Impeller: Plastic
- Shaft: stainless steel
- Bearing: Carbon, synthetic resin impregnated
Construction
- Glandless circulation pump with EC motor and integrated automatic power adjustment
- Red button technology and graphic display
- Motor protection with trip electronics
- Plug connection for functional extension with optional IF-Module for building automation (BA)
- Impeller with three-dimensionally curved blades and plastic can made of carbon fibre composite material
Scope of delivery
- Pump
- Including thermal insulation
- Including seals for threaded connection (loose)
- Including washers for flange screws (for nominal connection diameters DN 40 - DN 65)
- Including installation and operating instructions
Options
- Special versions for operating pressure PN 16
Accessories
- Screwed connection for threaded connection
- Adapter fittings
- IR-Stick
- IR-Monitor
- Stratos IF-Modules: Modbus, BACnet, CAN, PLR, LON, DP, Ext. Off, Ext. Min., SBM, Ext. Off/SBM
Installation and operating instructions
Wilo-Stratos/-D/-Z/-ZD
| Article Number | 2132717 |
| Edition | 2016-04 |
| Number of pages | 202 |
| Language | de, en, fr, nl |
PDF (8 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (271 KB)Take advantage of the latest replacement guide
The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.
After entering your old pump data, select the current pump type.