Wilo-SCP

• Horizontal split case, single and two stage, base mounted centrifugal pump

• Heating and Cooling Systems
• Transfer and Pressure Boosting
• Boiler Feed/Condensate
• Municipal Water Supply
• Irrigation
• Industrial Applications
• Max. Flow: 5,000 GPM
• Max. Head: 180 feet

Horizontal split casing allows replacement of bearings and mechanical seal without disturbing the system piping

Double suction design available for maximum efficiencies

Hydraulically balanced double-suction impeller for minimal axial thrust

Tongue & groove neck ring design eliminates seizing of rotating assembly

Pump shaft guards

• Power supply: 208-230/460/3/60 and 575/3/60 Volt
• Fluid temperature range: 18 to 250 °F (-8 to +120 °C)
• Operating pressure: 250 PSI (16 Bar) or 363 PSI (25 Bar)
• Suction flange size range: 2 1/2" to 20", Class 125 ANSI type
• Discharge flange size range: 2" to 16", Class 125 ANSI type
• Maximum Head: 180'
• Maximum flow: 5000 USGPM
• Max Hp: 500 Hp

• Pump housing: ASTM A48 Class 35 gray cast iron
• Impeller: ASTM B584 C83600 Leaded Tin Bronze
• Shaft; AISI 410 Stainless Steel

• Horizontal split case, single or double suction, single or two stage base mounted centrifugal pump
• Mechanical sealed (gland packed version optional)
• 60 Hz, 2-, 4- and 6-pole motors, ODP standard, TEFC optional
• Optional spacer coupling

• Pump end only (bare shaft pump) or
• Pump, base, coupling and coupling guard or
• Complete assembly (pump, base, coupling, guard and motor)
• Installation and operating instructions

• Automatic pump control via WILO CC HVAC Controller
• Higher flows up to 15,400 USGPM, 70,000 USGPM as special version
• Special motor (6000V, 10 000 V etc.)
• Special construction
  • Impeller: Lead free bronze, grey cast iron, stainless steel
  • Housing: Grey cast iron, ductile iron, Ni-resist cast iron, stainless steel

<TEXT>Project:Engineer:Contractor:Submitted By:Date:Approved By:Date:</TEXT>

• Power supply: 208-230/460/3/60 and 575/3/60 Volt
• Fluid temperature range: 18 to 250 °F (-8 to +120 °C)
• Operating pressure: 250 PSI (16 Bar) or 363 PSI (25 Bar)
• Suction flange size range: 2 1/2" to 20", Class 125 ANSI type
• Discharge flange size range: 2" to 16", Class 125 ANSI type
• Maximum Head: 180'
• Maximum flow: 5000 USGPM
• Max Hp: 500 Hp

• Pump housing: ASTM A48 Class 35 gray cast iron
• Impeller: ASTM B584 C83600 Leaded Tin Bronze
• Shaft; AISI 410 Stainless Steel

• Horizontal split case, single or double suction, single or two stage base mounted centrifugal pump
• Mechanical sealed (gland packed version optional)
• 60 Hz, 2-, 4- and 6-pole motors, ODP standard, TEFC optional
• Optional spacer coupling

• Pump end only (bare shaft pump) or
• Pump, base, coupling and coupling guard or
• Complete assembly (pump, base, coupling, guard and motor)
• Installation and operating instructions

• Automatic pump control via WILO CC HVAC Controller
• Higher flows up to 15,400 USGPM, 70,000 USGPM as special version
• Special motor (6000V, 10 000 V etc.)
• Special construction
  • Impeller: Lead free bronze, grey cast iron, stainless steel
  • Housing: Grey cast iron, ductile iron, Ni-resist cast iron, stainless steel

<TEXT>Project:Engineer:Contractor:Submitted By:Date:Approved By:Date:</TEXT>