Vertical Pumps

Dependable heavy-duty pumps for pumping wastewater and other unscreened liquids containing solids. Designed for:

• Factories
• Professional Office Buildings
• Schools and Hospitals
• Banks
• Restaurants
• Truck Loading Docks
• Residential

Pump Features

Thrust Bearing

Permanently grease lubricated, ball type, over-sized for increased life and capacity. Sealed to protect from dirt and moisture.

Intermediate Bearing Housing

Cast iron with bronze sleeve bearing, grease lubricated.

Lower Bearing Housing

Cast iron with bronze sleeve bearing, grease lubricated.

Legs

Galvanized steel.

Shaft

High carbon steel or stainless steel, polished and ground. Sized to provide maximum safety and strength when pumping raw unscreened wastewater.

Impeller

Hydraulically and dynamically balanced. Trimmed to suit job conditions. Cast iron is standard on all models. Bronze is available as an option.

Case

Heavy-duty, close grain, high-density cast iron.

Motor Features

Motor Type

Vertical, solid shaft with NEMA-C mounting flange. The motor is connected to the pump with a flexible coupling. Totally enclosed 60 Hz motors are standard.

Motor Horsepower

1750 RPM, 1/2 HP through 30 HP.

1150 RPM, 1/2 HP through 10 HP.

Motor Voltage

Single-phase voltages are 115 / 208-230. Three-phase voltages are 208-230 / 460.

Explosion-Proof Motors (Optional)

U/L explosion-proof motors suitable for use in Class 1, Groups C and D hazardous atmospheres are available.

50 Hz Motors (Optional)

50 Hz motors are available.