Wilo-Stratos MAXO-Z
Superior intelligence, unparalleled quality.
Superior intelligence, unparalleled quality.
The Wilo-Stratos MAXO-Z has specifically been developed for drinking water applications and combines the innovative characteristics of the Wilo-Stratos MAXO with a stainless steel housing. The durable and hygienic material sets it apart from other domestic hot water circulators on the market.
Recommended services
Your advantages
- Intuitive operation by application-guided settings with the Setup Guide plus the combination of a new display and operating button using the Green Button Technology
- Highest standard of drinking water hygiene and energy efficiency with the new, intelligent T-const. control function.
- Optimum hygiene support thanks to the detection of thermal disinfection
- Latest communication interfaces (e.g. Bluetooth) for connecting to mobile terminal devices and direct pump networking using Wilo Net for multiple pump control
- Maximum convenience in electrical installation thanks to a clearly arranged and spacious terminal box and the optimised Wilo-Connector
Environmentally friendly features
- Combination of optimised and innovative control modes provides maximum energy efficiency
- Sustainable and carbon-neutral production and processes in our European factories
- Full transparency of the pump's operating status via remote access to save resources compared to on-site assessments
Design
Smart glandless circulator with screwed connection or flange connection, EC motor with integrated electronic power adjustment
Application
Domestic hot water circulation systems of all kinds, hot-water heating systems of all kinds, air-conditioning, closed cooling circuits, industrial circulation systems
Equipment/function
Field of application
The pump facilitates an operation with highest system efficiency via precise setting of the control mode for the system-specific application (e.g. circulation, drinking water storage tank).
Drinking water
- Circulation
- Drinking water storage tank
Other applications are possible:
Heating
- Radiator
- Underfloor heating
- Ceiling heating
- Fan heater
- Concrete core heating*
- Hydraulic shunt
- Differential pressure-less distributor*
- Buffer heating*
- Heat exchanger
- Heat source circuit (heat pump)*
- District heating circuit*
Cooling
- Ceiling cooling
- Underfloor cooling
- Air-conditioning devices
- Concrete core cooling*
- Hydraulic shunt
- Differential pressure-less distributor*
- Buffer cooling*
- Heat exchanger
- Recooling circuit*
- District cooling circuit*
(* system types from SW≥01.05.10.00 available)
Heating and cooling combined
- Automatic switchover
The following control modes are available depending on the selected application:
Control modes
- Constant speed (control mode)
- Δp-c for constant differential pressure
- Δp-v for variable differential pressure
- Dynamic Adapt plus for continuous (dynamic) adjustment of the delivery rate to the current requirement
- T-const. for constant temperature control
- ΔT for differential temperature control
- Constant Q for constant volume flow control
- Multi-Flow Adaptation: Total volume flow determination through the feeder pump for the needs-based supply of secondary pumps in the heating circuit distributors
- User-defined PID control
Optional functions
- Q-Limitmax. for limiting the maximum volume flow
- Q-Limitmin. for limiting the minimum volume flow
- No-Flow Stop (zero-flow-deactivation)
- Automatic night setback
- Index circuit evaluator (Δp-c control with external actual value sensor)
- Thermal disinfection detection
- Variable pitch of Δp-v pump curve
Manual settings
- Selection of the field of application in the setting assistant
- Setting the related operating parameters
- Nominal duty point: direct input of calculated duty point at Δp-v
- Status display
- Setting and resetting the energy meters (heating and cooling)
- Pump venting function
- Key lock for disabling the settings
- Function for resetting the factory settings or the saved restoration points (parameter sets)
- Parameterising the analogue inputs
- Parameterising the binary inputs
- Parameterising the relay outputs
Automatic functions
- Power adjustment according to requirements for energy-efficient operation depending on the operating mode
- Night setback
- Deactivation at zero flow (No-Flow Stop)
- Soft start
- Automatic troubleshooting routines (e.g. deblocking function)
- Switchover between heating/cooling mode
- Full motor protection with integrated trip electronics
External control inputs and their functions
2 x analogue inputs:
- Signal types: 0 – 10 V, 2 – 10 V, 0 – 20 mA, 4 – 20 mA, PT1000
- Applications: Remote adjustment of the setpoints in every control mode (except Multi-Flow Adaptation), sensor inputs for temperature, differential pressure or free sensor in user-defined PID operation
2 x digital inputs:
- For potential-free control outputs or switch
- Parametrisable functions:
- Ext. Off
- Ext. Min
- Ext. Max
- MANUAL (BMS-OFF)
- Key lock
- Switchover between heating/cooling mode
Wilo Net for dual-pump management of 2 single pumps, communication of several pumps with each other and pump remote adjustment via gateway
Signal and display functions
- Display status operation display:
- Setpoint
- Actual delivery head
- Actual volume flow
- Power consumption
- Electric consumption
- Temperatures
- Status display LED: Faultless operation (green LED), pump communication (blue LED)
- Display status of display fault (display red):
- Error codes and error description in full text
- Remedial measures
- Display status of display warning (display yellow):
- Warning codes and description of the warning in full text
- Remedial measures
- Display status process indicator display (display blue):
- Pump venting
- Update procedure
- Display BMS communication (display blue):
- Summary of the active BMS parameters (baud rate, address...)
- Collective fault signal SSM (potential-free changeover contact)
- Collective run signal SBM (potential-free normally open contact)
Data exchange
- Bluetooth interface for wireless data exchange and remote operation of the pump using a smartphone or tablet.
- Remote monitoring of the pump via WiloCare.
- Digital Modbus TCP interface for connection to building automation (BA) (possible with Wilo-CIF module Ethernet [multi-protocol]).
- Serial digital interface Modbus RTU for connecting building automation (BA) via RS485 bus system (possible with Wilo-CIF module Modbus RTU).
- Digital BACnet IP interface for connection to building automation (BA) (possible with Wilo-CIF module Ethernet).
- Serial digital interface BACnet MS/TP for connecting building automation (BA) via RS485 bus system (possible with Wilo-CIF module BACnet MS/TP).
- Serial digital interface LON for connecting building automation (BA) via bus system LONWorks (possible with Wilo-CIF module LON).
- Serial digital interface CANopen for connecting building automation (BA) via bus system CANopen (possible with Wilo-CIF module CANopen).
- Serial digital interface PLR for connecting BA via company-specific coupling module (possible with Wilo-CIF module PLR).
Equipment
- For flange-end pumps: Flange versions
- Standard version for DN 32 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges
- Standard version for DN 80/DN 100 pumps: PN 6 flange (designed for PN 16 according to EN 1092-2) for PN 6 counter flange
- Special version for DN 32 to DN 100 pumps: PN 16 flange (according to EN 1092-2) for PN 16 counter flange
- Various integrated communication interfaces and optionally usable CIF module plug-in position
- 5 cable inlets for connecting the communication interfaces
- Bluetooth interface
- High resolution graphic display with green button and 2 additional buttons
- User-friendly terminal room
- Integrated temperature sensor
- Thermal insulation as standard for heating applications
- Quick electrical connection with optimised Wilo-Connector for the power supply
Scope of delivery
- Pump
- Optimised Wilo-Connector
- 2x threaded cable gland M16 x 1.5
- Gaskets for threaded connection
- Washers for flange screws (for nominal connection diameters DN 32 - DN 65)
- Thermal insulation shell
- Installation and operating instructions
Typekey
Example: | Wilo-Stratos MAXO-Z 40/0.5-8 |
Stratos MAXO | High-efficiency pump (screw-end or flange-end pump), electronically controlled |
Z | Single pump for domestic hot water circulation |
40/ | Nominal connection diameter |
0.5-8 | Nominal delivery head range [m] |
-R7 | Without an integrated Stratos MAXO temperature sensor |
Technical data
- Permissible temperature range
- Drinking water up to 3.57 mmol/l (20 °dH): 0 °C to +80 °C.
- Heating water: -10 °C to +110 °C.
- Mains connection 1~230 V, 50/60 Hz
- Protection class IPX4D
- Screwed connection or flange connection (depending on type) Rp 1 to DN 65
- Max. operating pressure of standard version: 6/10 bar (special version: 16 bar)
- Max. volume flow Q: 46 m³/h
- Max. delivery head H: 12 m
Materials
- Bearing: Carbon-graphite
- Impeller: PPS-GF40
- Pump housing: Stainless steel
- Shaft: 1.4122, DLC-coated
Construction
- Smart glandless circulator with EC motor and integrated electronic power adjustment
- Green Button Technology and graphic display
- Motor protection with trip electronics
- Plug connection for functional extension with optional CIF-module for building automation (BA)
- Impeller with three-dimensionally curved blades and plastic sealing tube made of carbon fibre composite material