Actun FIRST SPU 4.06-20-B/XI4-50-3-400
| Hydraulic data | |
|---|---|
| Minimum efficiency index (MEI) | ≥0,51 |
| Maximum operating pressure PN | 13 bar |
| Max. sand content | 50 g/m³ |
| Max. immersion depth | 200 m |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 30 °C |
| Motor data | |
|---|---|
| Energy efficiency index (EEI) * | ≤0,51 |
| Mains connection | 3~400 V, 50 Hz |
| Rated power P2 | 2,2 kW |
| Rated speed n | 2855 1/min |
| Rated current IN | 5,3 A |
| Starting current I | 38,3 A |
| Activation type | Direct On Line (DOL) |
| Power factor cos φ100 | 0,79 |
| Max. switching frequency t | 40 1/h |
| Protection class motor | IP68 |
| Motor diameter DM | 102 mm |
| Min. flow rate at the motor m/s | 0,2 m/s |
| Cable | |
|---|---|
| Connection cable length L | 2 m |
| Cable cross-section | 4G1,5 mm² |
| Materials | |
|---|---|
| Pump housing | Stainless steel |
| Impeller | PPE |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the discharge side DNd | Rp 2 |
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Actun FIRST SPU 4.06-20-B/XI4-50-3-400 |
| Article number | 6083391 |
| EAN number | 4048482816395 |
| Colour | Silver |
| Minimum order quantity | 1 |
| Date of sales availability | 2010-01-01 |
| Packaging | |
|---|---|
| Packaging type | Box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 1440 mm |
| Length L | 1310 mm |
| Height with packaging | 120 mm |
| Height H | 98 mm |
| Width with packaging | 120 mm |
| Width W | 98 mm |
| Gross weight, approx. m | 23,8 kg |
| Net weight, approx. m | 21,8 kg |
Fully submersible, multistage pump with radial or semi-axial impellers with a shroud design for vertical or horizontal installation, with built-in non-return valve. Corrosion-resistant single-phase or three-phase AC motor for direct starting with oil filling, equipped with a sand guard and mechanical seal, as well as self-lubricating bearings. The motor is cooled by the fluid. Therefore, the unit must always be immersed when operated. A cooling shroud is required for horizontal installation. For pumping water out of boreholes with a maximum immersion depth of 200 m and a maximum sand content of 50 g/m³.
Scope of delivery
- Hydraulics + motor completely assembled
- 2/2.5 m submersible short cable fitted
- Installation and user manual
Notice
The single-phase version requires a switchbox with a condenser, thermal motor protection and on/off switch (optional accessories).
| Operating data | |
|---|---|
| Max. delivery head Hmax | 121,1 m |
| Unit | |
|---|---|
| Minimum efficiency index (MEI) | ≥0,51 |
| Pipe connection on the discharge side DNd | Rp 2 |
| Maximum operating pressure p | 40,0 bar |
| Max. sand content | 50 g/m³ |
| Protection class motor | IP68 |
| Max. immersion depth | 200 m |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 30 °C |
| Net weight, approx. m | 21,8 kg |
| Max. diameter Dmax | 98 mm |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Rated power P2 | 2,2 kW |
| Rated speed n | 2855 1/min |
| Rated current IN | 5,3 A |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 40 1/h |
| Motor diameter DM | 102 mm |
| Min. flow rate at the motor m/s | 0,2 m/s |
| Cable | |
|---|---|
| Connection cable length L | 2 m |
| Cable cross-section | 4G1,5 mm² |
| Materials | |
|---|---|
| Pump housing | Stainless steel |
| Motor housing | Stainless steel |
| Shaft | Stainless steel |
| Impeller | PPE |
| Ordering information | |
|---|---|
| Net weight, approx. m | 21,8 kg |
| Brand | Wilo |
| Product description | Actun FIRST SPU 4.06-20-B/XI4-50-3-400 |
| Article number | 6083391 |
Certification booklet
Certification booklet Wilo-Actun FIRST-SPU4
| Article Number | 6053358 |
| Edition | 2020-08 |
| Number of pages | 12 |
| Language | language neutral |
PDF (2 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (287 KB)Cable (3) | ||||
Shrink sleeving connections | ||||
Shrink sleeving connections | heat-shrink connections 4 x 1.5 mm² and 2.5 mm² | 4029677 | ||
Heat shrink cable sleeve for sealing a connection of two open cable ends. Scope of delivery
| ||||
heat-shrink connections 4 x 10 mm² and 16 mm² | 4029678 | |||
Heat shrink cable sleeve for sealing a connection of two open cable ends. Scope of delivery
| ||||
heat-shrink connections 4 x 4.0 mm² and 6.0 mm² | 4059213 | |||
Heat shrink cable sleeve for sealing a connection of two open cable ends. Scope of delivery
| ||||