EMUport CORE 45.2-14/540 | Wilo

Similar to figure

EMUport CORE 45.2-14/540

Article number : 2554539

Hydraulic data
Maximum operating pressure PN	2 bar
Min. fluid temperature T_min	3 °C
Max. fluid temperature T_max	40 °C
Min. ambient temperature T_min	3 °C
Max. ambient temperature T_max	40 °C
Switching volume V	900 l
Macerator	no

Motor data
Mains connection	3~400 V, 50 Hz
Rated current I_N	5,7 A
Phase	3
Rated speed n	2908 1/min
Number of poles	2
Activation type	Direct On Line (DOL)
Max. switching frequency t	60 1/h
Power consumption P1(Q=max.) of selected impeller * number of pumps P1	3100 W
Motor efficiency class	IE3
For Wilo pumps	Rexa PRO C08DA-432 + P13.2-16/EAD3-2-T
Insulation class	F
Protection class	IP68

Materials
Pump housing	Grey cast iron
Impeller	Grey cast iron
Shaft	Stainless steel
Motor housing	Grey cast iron

Installation dimensions
Operating mode (non-immersed)	S1
Pipe connection on the discharge side	DN 100
Pipe connection on the suction side	DN 200

Wilo-EMUport CORE 45.2

Product data
Brand	Wilo
Product description	EMUport CORE 45.2-14/540
Article number	2554539
EAN number	4062679160856
Colour	black/silver
Minimum order quantity	1
Date of sales availability	2021-11-01

Packaging
Packaging type	Euro pallet
Packaging property	Transport packaging
Pieces per pallet	1
Number per layer	1

Dimension, weight
Length with packaging	1900 mm
Length L	1830 mm
Height with packaging	2110 mm
Height H	1960 mm
Width with packaging	1900 mm
Width W	1760 mm
Gross weight, approx. m	566 kg
Net weight, approx. m	516 kg

Fully submersible and automatically operated sewage lifting unit with solids separation system and two submersible sewage pumps in alternating operation without peak load

Fluid

For the collection and pumping of these fluids in commercial areas:

Sewage with faeces
Sewage without faeces

Sewage pumping according to 12050

The lifting unit follows DIN EN 12050-1.

Construction

All-in-one gastight and watertight collection tank:

Without constructive welded joints
With an inspection opening
Rounded edges and sloped floor with the deepest point directly below the pump, preventing deposits and the drying of solids at critical points

Two solids separation tanks:

Pre-filtering sewage upstream of the collection tank
Separately lockable

Sewage pump:

Mounted directly on the collection tank
Two high-performance submersible sewage pumps run in alternating operation as a redundant double-pump system

Operation of the two pumps at the same time is strictly forbidden.

Supply box/distributor:

For connection to the inlet pipe
With transparent cover

Manual flushing line for the collection tank

Scope of delivery

Solids separation system with two dry-installed submersible pumps
2x shut-off valves for the solids separation tanks
2x non-return valves at the discharge side
2x shut-off valves at the discharge side
Consolidation of the discharge pipe
1x level probe
1x floor fixation as cross beam
2.5 m ventilation hose
1x maintenance kit with a blanking cover for the opening on the collection tank and a blanking cover for the discharge pipe
Installation and operating instructions

Operating data
For Wilo pumps	Rexa PRO C08DA-432 + P13.2-16/EAD3-2-T

Approved field of application
Fluid temperature T	3 °C
Max. fluid temperature, for short periods up to 3 min. T	40 °C
Ambient temperature T	3 °C
Maximum operating pressure PN	2 bar
Max. permissible pressure in the pressure pipe P	6 bar

Product data
Gross volume of the tank V	1200 l
Switching volume V	900 l
Operating mode (non-immersed)	S1
Height H	1960 mm
Length L	1830 mm
Width W	1760 mm
Diagonal dimension Diagonal axis	2000 mm

Motor data
Mains connection	3~400 V, 50 Hz
Voltage tolerance	±10 %
Rated power P₂	2,65 kW
Rated speed n	2908 1/min
Rated current I_N	5,7 A
Insulation class	F
Protection class motor	IP68
Activation type	Direct On Line (DOL)
Max. switching frequency t	60 1/h
Motor protection	Bimetall

Cable
Connection cable length L	20 m
Cable type	TGSH-J
Cable cross-section	7G1,5 mm²
Mains plug	no
Type of connection cable	Detachable

Materials
Tank	PE
Pump housing	Grey cast iron
Impeller	Grey cast iron
Shaft	Stainless steel
Gasket material	NBR
Motor housing	Grey cast iron

Installation dimensions
Pipe connection on the suction side	DN 200
Pipe connection on the discharge side	DN 100
Connection venting	Ø 75

Ordering information
Brand	Wilo
Product description	EMUport CORE 45.2-14/540
Net weight, approx. m	516 kg
Article number	2554539

Installation and operating instructions

Wilo-EMUport CORE

Article Number	6092612
Edition	2025-04
Number of pages	44
Language	en

PDF (8 MB)

Wilo-Control SC-L...-FTS

Article Number	2545546
Edition	08-2016
Number of pages	112
Language	de, en, es, fr, hu

PDF (13 MB)

Operating instructions (digital)

Wilo-EMUport CORE

Article Number	6092612
Edition	2025-04
Language	bg, cs, de, el, en, et, fr, hu, ko, lt, lv, pl, ro, tr

HTML (211 MB)

Open

Certification booklet

Wilo-EMUport Core 20.2 / 45.2 / 50.2 / 60.2

Article Number	2546469
Edition	2021-07
Number of pages	40
Language	ar, az, ba, bg, cs, da, de, el, en, es, et, fi, fr, ga, hr, hu, it, ko, lt, lv, mk, nl, no, pl, pt, ro, ru, sk, sl, sq, sr, sv, tr, uk, zh

PDF (3 MB)

Group Statement

Group Statement REACH

Edition	2021-05
Number of pages	5
Language	language neutral

PDF (287 KB)

Level control with level sensor (4) Level measurement using a level sensor with various measurement ranges, including high water alarm and dry-running protection. The breakdown barrier and the Ex cut-off relays are not required except for the connection of signal transmitters in potentially explosive areas! These can also be dispensed with when the SC-L..-Ex switchgear is used!
Switchgear Wilo-Control SC-Lift
Switchgear Wilo-Control SC-Lift	SC-L-2x6.3A-T34-DOL-WM-FTS	2543243
Switchgear Wilo-Control SC-Lift	Microprocessor-controlled switchgear for control of submersible sewage lifting units with solids separation system. Individual parameters are entered via symbol-based menu navigation and an operating button. Functions “FTS” operating mode: Control of two pumps in alternating operation. Parallel operation is prohibited on the hardware side and software side! Configurable overload protection Thermal motor monitoring Moisture monitoring Adjustable follow-up time Automatic pump alteration Direction of rotation monitoring High water alarm and dry-running protection Fault memory for 16 error messages including the type of fault Equipment Ammeter in the switch cabinet door for direct operating control Operating mode selection switch (Manual-0-Automatic) for every pump in the switch cabinet door for easy operation during maintenance Display of the current operating status and data, as well as faults, using the LCD display and LEDs Elapsed time indicator Symbol-based menu navigation Configuration of operating parameters and operation via operating button Motor protection switch Free space for installation of additional system accessories Remote access via ModBus RTU, BACnet and optionally GSM Inputs 1x analogue precision input 4-20 mA with Zener barrier for level control with level sensors within potentially explosive atmospheres 1x input per connected pump for thermal winding monitoring for bimetal or PTC temperature sensor 1x input per connected pump for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the high water alarm 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Options Version with remote access via GSM, BACnet or LON Control for a drainage pump Control of the ventilation for the operating space Additional connection for moisture monitoring of the operating space Voltmeter in the switch cabinet door Monitoring the chamber cover upon installation in pump chambers to the concealed floor installation Housing for outdoor installation Rechargeable battery for mains-independent alarm signal Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may be used only outside potentially explosive atmospheres. Direct connection of a signal transmitter for level measurement within potentially explosive atmospheres is possible (intrinsically safe circuit via Zener barrier). Direct connection of pumps in potentially explosive atmospheres is not possible!
Communication module GSM (SC)
Communication module GSM (SC)	Communication module GSM (SC)	2542216
Communication module GSM (SC)	Additional module for equipping the switchgear series Wilo-SC/SCe-HVAC, SC/SCe-Booster and SC-L for dialling into and communicating in GSM mobile phone networks. The GSM module represents an extension of the SC/SCe system for the transfer of status and fault signals of a SC/SCe system via SMS (Short Message Service). Up to 2 recipients can be set up and prioritised who are to receive a fault signal via SMS in the event of a system failure. The settings with respect to the SMS functions can be made directly on the display of the SC/SCe system. Version: Insulant housing for installation in a switch cabinet, fixation by means of the supplied accessories kit (adapter plate). A SIM card and an antenna are required for the operation of the modem which are not included in the scope of delivery. Antennas with various cable lengths of 2.5 m, 10 m, 15 m are available as additional accessories. SIM cards are available from various mobile telephone providers. The module is installed in the switchgear by the manufacturer when the order for the system is received. Retroactive installation of the communication module is possible. The installation must be performed by customer service, as a software update of the SC/SCe system is also required. Scope of delivery Communication module SC-OPTION GSM Communication module holder Power supply connection cable Communication cable
Signal horn
Signal horn	Signal horn 1~230 V	501459398
Signal horn	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Flash light
Flash light	1~230 VAC flash light, wall fixation	2551613
Flash light	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Stationary dry well installation (21) Installation example The lifting unit is installed in a space below the backflow level. Sewage from all drainage objects below the backflow level flows into the lifting unit. On the discharge side, the lifting unit is connected to the sewage system above the backflow level via a pipe loop. Inlet and discharge lines are self-supporting.
Flange connector
Flange connector	Flange connector DN 100 VA	6093371
	Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories.
	Flange connector DN 200/PE-HD 160	6078901
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 200/PE-HD 225	6078904
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 200/PE-HD 280	6078902
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 200/PE-HD 315	2546496
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 80 VA	6093373
	Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories.
	Flange connector DN 80/112 VA	6093372
	Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories.
Adapter flange
Adapter flange	Flange adapter DN100/150	2546499
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/150	6078905
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/250	6078900
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/300	2546492
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/350	2546493
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN80/100	6079343
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
Intake set
Intake set	Inlet set DN 150/200	6078906
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 200	6079342
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 250/200	6079341
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 300/200	2546494
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 350/200	2546495
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
Flow meter set
Flow meter set	Flow meter set DN 80	6079344
Flow meter set	Flow meter set comprised of gate valve and flow meter, including gasket and mounting accessories. Gate valve technical data: Housing material: EN-JL1040 coated Material shut-off plate: 1.4301 Flow meter technical data: Material: Steel, coated with EPDM or NBR lining Sensors: Conical Measurement principle: Electromagnetic induction (6.25/7.5 Hz) Ambient temperature: -40 to +70 °C Fluid temperature: -10 to +70 °C Operating pressure: 0.03…20 bar Housing protection class: IP 67 (1 m for 30 min)
3-way cock
3-way cock	3-way shut-off ball cock Rp 1½	2511607
3-way cock	Shut-off ball cock for switching between 2 circuits: With T drill-hole 3 connections as female thread Handle Ball sealed on all sides.
Flushing connection
Flushing connection	Flushing kit for supply box EMUport CORE 45.2/60.2	6093126
Flushing connection	Accessory set for the automatic flushing function of the supply box, consisting of 3 m textile hose and fixation material

Adapter (6)
Adapter flange
Adapter flange	Flange adapter DN80/100	6079343
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN100/150	2546499
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/150	6078905
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/250	6078900
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/300	2546492
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
	Flange adapter DN200/350	2546493
	Flange adapter (FFRe piece) the connection of one inlet pipe with various DN connections, including gasket and mounting accessories
Fittings (2)
3-way cock
3-way cock	3-way shut-off ball cock Rp 1½	2511607
3-way cock	Shut-off ball cock for switching between 2 circuits: With T drill-hole 3 connections as female thread Handle Ball sealed on all sides.
Flushing connection
Flushing connection	Flushing kit for supply box EMUport CORE 45.2/60.2	6093126
Flushing connection	Accessory set for the automatic flushing function of the supply box, consisting of 3 m textile hose and fixation material
Installation/setup (7)
Diaphragm hand pump
Diaphragm hand pump	Diaphragm hand pump	2060166
Diaphragm hand pump	Diaphragm hand pump for manual draining of a collection reservoir. Fixed installation and mobile application possible. The pumped-off fluid must flow directly to the discharge pipe or another collection point.
Intake set
Intake set	Inlet set DN 300/200	2546494
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 350/200	2546495
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 150/200	6078906
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 250/200	6079341
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
	Inlet set DN 200	6079342
	Intake set comprised of gate valve and flange adapter (FFRe piece) for the connection of the inlet pipe to the solids separation system, including gasket and mounting accessories
Flow meter set
Flow meter set	Flow meter set DN 80	6079344
Flow meter set	Flow meter set comprised of gate valve and flow meter, including gasket and mounting accessories. Gate valve technical data: Housing material: EN-JL1040 coated Material shut-off plate: 1.4301 Flow meter technical data: Material: Steel, coated with EPDM or NBR lining Sensors: Conical Measurement principle: Electromagnetic induction (6.25/7.5 Hz) Ambient temperature: -40 to +70 °C Fluid temperature: -10 to +70 °C Operating pressure: 0.03…20 bar Housing protection class: IP 67 (1 m for 30 min)
Pipes/pipe joints (7)
Flange connector
Flange connector	Flange connector DN 200/PE-HD 315	2546496
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 200/PE-HD 160	6078901
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 200/PE-HD 280	6078902
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 200/PE-HD 225	6078904
	Flange connector for the connection of plastic pipes to a DN flange, including gasket and mounting accessories.
	Flange connector DN 100 VA	6093371
	Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories.
	Flange connector DN 80/112 VA	6093372
	Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories.
	Flange connector DN 80 VA	6093373
	Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories.

Pump control (3)
Switchgear Wilo-Control SC-Lift
Switchgear Wilo-Control SC-Lift	SC-L-1x6.3A-T34-DOL-WM	2538920
	Microprocessor-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button. Functions Three different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 16 error messages including the type of fault Maintenance monitoring Equipment Display of the current operating status and data, as well as faults, using the LCD display and LEDs Elapsed time indicator Symbol-based menu navigation Configuration of operating parameters and operation via operating button Main switch Motor protection switch in the “DOL” version Fuse and motor protection relay in the “SD” version Operating mode selection switch per pump: Emergency/test mode, off, automatic mode Remote access via ModBus RTU, BACnet and optionally GSM Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitoring for bimetal or PTC temperature sensor 1x input for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the high water alarm 1x potential-free contact* as a signal to start a pump-dependent submersible mixer (when idle) 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Scope of delivery Switchgear Wiring diagram Installation and operating instructions Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within potentially explosive atmospheres must be connected through an intrinsically safe circuit, e.g. breakdown barrier or Ex cut-off relay. Direct connection of pumps and/or signal transmitters is not possible within potentially explosive atmospheres!
	SC-L-2x6.3A-T34-DOL-WM	2538921
	Microprocessor-controlled switchgear for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button. Functions Three different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 16 error messages including the type of fault Maintenance monitoring Equipment Display of the current operating status and data, as well as faults, using the LCD display and LEDs Elapsed time indicator Symbol-based menu navigation Configuration of operating parameters and operation via operating button Main switch Motor protection switch in the “DOL” version Fuse and motor protection relay in the “SD” version Operating mode selection switch per pump: Emergency/test mode, off, automatic mode Remote access via ModBus RTU, BACnet and optionally GSM Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding monitoring for bimetal or PTC temperature sensor 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the high water alarm 1x potential-free contact* as a signal to start a pump-dependent submersible mixer (when idle) 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Scope of delivery Switchgear Wiring diagram Installation and operating instructions Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within potentially explosive atmospheres must be connected through an intrinsically safe circuit, e.g. breakdown barrier or Ex cut-off relay. Direct connection of pumps and/or signal transmitters is not possible within potentially explosive atmospheres!
	SC-L-2x6.3A-T34-DOL-WM-FTS	2543243
	Microprocessor-controlled switchgear for control of submersible sewage lifting units with solids separation system. Individual parameters are entered via symbol-based menu navigation and an operating button. Functions “FTS” operating mode: Control of two pumps in alternating operation. Parallel operation is prohibited on the hardware side and software side! Configurable overload protection Thermal motor monitoring Moisture monitoring Adjustable follow-up time Automatic pump alteration Direction of rotation monitoring High water alarm and dry-running protection Fault memory for 16 error messages including the type of fault Equipment Ammeter in the switch cabinet door for direct operating control Operating mode selection switch (Manual-0-Automatic) for every pump in the switch cabinet door for easy operation during maintenance Display of the current operating status and data, as well as faults, using the LCD display and LEDs Elapsed time indicator Symbol-based menu navigation Configuration of operating parameters and operation via operating button Motor protection switch Free space for installation of additional system accessories Remote access via ModBus RTU, BACnet and optionally GSM Inputs 1x analogue precision input 4-20 mA with Zener barrier for level control with level sensors within potentially explosive atmospheres 1x input per connected pump for thermal winding monitoring for bimetal or PTC temperature sensor 1x input per connected pump for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the high water alarm 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Options Version with remote access via GSM, BACnet or LON Control for a drainage pump Control of the ventilation for the operating space Additional connection for moisture monitoring of the operating space Voltmeter in the switch cabinet door Monitoring the chamber cover upon installation in pump chambers to the concealed floor installation Housing for outdoor installation Rechargeable battery for mains-independent alarm signal Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may be used only outside potentially explosive atmospheres. Direct connection of a signal transmitter for level measurement within potentially explosive atmospheres is possible (intrinsically safe circuit via Zener barrier). Direct connection of pumps in potentially explosive atmospheres is not possible!
Pump control/accessories (1)
Communication module GSM (SC)
Communication module GSM (SC)	Communication module GSM (SC)	2542216
Communication module GSM (SC)	Additional module for equipping the switchgear series Wilo-SC/SCe-HVAC, SC/SCe-Booster and SC-L for dialling into and communicating in GSM mobile phone networks. The GSM module represents an extension of the SC/SCe system for the transfer of status and fault signals of a SC/SCe system via SMS (Short Message Service). Up to 2 recipients can be set up and prioritised who are to receive a fault signal via SMS in the event of a system failure. The settings with respect to the SMS functions can be made directly on the display of the SC/SCe system. Version: Insulant housing for installation in a switch cabinet, fixation by means of the supplied accessories kit (adapter plate). A SIM card and an antenna are required for the operation of the modem which are not included in the scope of delivery. Antennas with various cable lengths of 2.5 m, 10 m, 15 m are available as additional accessories. SIM cards are available from various mobile telephone providers. The module is installed in the switchgear by the manufacturer when the order for the system is received. Retroactive installation of the communication module is possible. The installation must be performed by customer service, as a software update of the SC/SCe system is also required. Scope of delivery Communication module SC-OPTION GSM Communication module holder Power supply connection cable Communication cable
Alarm signal (5)
Flash light
Flash light	1~230 VAC flash light, surface mounting	2510429
	Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
	24 VDC flash light, wall fixation	2551612
	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
	1~230 VAC flash light, wall fixation	2551613
	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Signal horn
Signal horn	Signal horn 12-24 VDC	2017208
	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
	Signal horn 1~230 V	501459398
	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!

EMUport CORE 45.2-14/540

Wilo-EMUport CORE 45.2

Installation and operating instructions

Wilo-EMUport CORE

Wilo-Control SC-L...-FTS

Operating instructions (digital)

Wilo-EMUport CORE

Certification booklet

Wilo-EMUport Core 20.2 / 45.2 / 50.2 / 60.2

Group Statement

Group Statement REACH

Level control with level sensor (4)

Switchgear Wilo-Control SC-Lift

Switchgear Wilo-Control SC-Lift

Communication module GSM (SC)

Communication module GSM (SC)

Signal horn

Signal horn

Flash light

Flash light

Stationary dry well installation (21)

Flange connector

Flange connector

Adapter flange

Adapter flange

Intake set

Intake set

Flow meter set

Flow meter set

3-way cock

3-way cock

Flushing connection

Flushing connection

Adapter (6)

Adapter flange

Adapter flange

Fittings (2)

3-way cock

3-way cock

Flushing connection

Flushing connection

Installation/setup (7)

Diaphragm hand pump

Diaphragm hand pump

Intake set

Intake set

Flow meter set

Flow meter set

Pipes/pipe joints (7)

Flange connector

Flange connector

Pump control (3)

Switchgear Wilo-Control SC-Lift

Switchgear Wilo-Control SC-Lift

Pump control/accessories (1)

Communication module GSM (SC)

Communication module GSM (SC)

Alarm signal (5)

Flash light

Flash light

Signal horn

Signal horn