Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Özellikler/Ürün avantajları

Kompakt yapısı ve düşük ağırlığı ile dar bacalarda kolay kurulum
Kendiliğinden devreye giren motor denetimi sayesinde işletim güvenilirliği
Takılı şamandıra şalteri sayesinde kolay işletim

Önerilen servisler

Konstrüksiyon

Submersible pump for fully automatic operation in portable wet well installation.

Sıvılar

For the pumping in domestic areas of wastewater with small amounts of sand and gravel.

Donanım / işlev

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Tip kodlaması

Example	Wilo-Initial DRAIN 10-7/522/AEF-10M
Initial	Series
Drain	Wastewater pump
10	Nominal flow in m³/h
7	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10 M	Cable length

Teknik veriler

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Malzemeler

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Tasarım

Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Тeslimat kapsamı

Pump
Hose connection Ø 24/32 mm, enclosed
Installation and operating instructions

Montaj ve kullanma kılavuzu