ASV 26/4 3-f | Wilo

ASV 26/4 3-f

Number of results: 3

Flow

Head / Pump pressure

Product design type	Glandless premium smart-pump	Glandless standard pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos MAXO-Z 30/0,5-8 PN 10	TOP-Z 30/7 (3~400 V, PN 10, RG)	Yonos MAXO-Z 30/0,5-7 PN 10	ASV 26/4 3-f
Article number	2164670	2048341	2175540	-
Series	Wilo-Stratos MAXO-Z	Wilo-TOP-Z	Wilo-Yonos MAXO-Z	-
Mains connection	1~230 V ±10%, 50/60 Hz	3~400 V ±10%, 50 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	180 mm	180 mm	180 mm	220 mm
Pump connection	G 2	G 2	G 2	-
Pump connection (alternative designation)	RP 1 1/2	RP 1 1/2	RP 1 1/2	-
	DN 30	DN 30	DN 30	-
Display	Graphic colour display (4.3 inches)	No display	LED segment display	-
Comment	Change piping Check electrical connection	Change piping	Change piping Check electrical connection	-
Result summary
Function
Control mode	Δp-v for variable differential pressure	-	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	-	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	-	-
	Dynamic Adapt plus	-	-	-
	ΔT-const. for constant differential temperature control	-	-	-
	T-const. for constant temperature control	-	-	-
	Constant Q for constant volume flow control	-	-	-
	Multi Flow Adaptation	-	-	-
	Δ T-const. for constant differential temperature control	-	-	-
	User-defined PID control	-	-	-
	Constant speed (n-const.)	Constant speed (n-const.)	-	-
	-	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	-	-	-
	Thermal desinfection	-	-	-
	Night set back	-	-	-
	Heat quantity measurement	-	-	-
	Cooling quantity measurement	-	-	-
	Key locking function	-	-	-
	No-Flow Stop	-	-	-
	Adjustable volume flow limiter	-	-	-
	Ability to save and restore configured pump settings (3 restoration points)	-	-	-
	Fault message and warning message in plain text including suggested remedy	-	-	-
Multi pump operation	Main/Standby	-	-	-
	Parallel operation	-	-	-
	-	-	Main/Standby (with Connect Module Yonos MAXO)	-
Measurement value logging	Heat and cooling capacity measurement	-	-	-
Display	Setpoint	-	Setpoint	-
	Actual delivery head	-	-	-
	Actual volume flow	-	-	-
	Actual power consumption	-	-	-
	Energy consumption	-	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-	-
	Control mode	-	-	-
	Active influences (e.g. STOP)	-	-	-
Display (can also be selected)	Speed	-	-	-
	Heating quantity	-	-	-
	Cooling quantity	-	-	-
	Operating hours	-	-	-
	Mains voltage	-	-	-
	Warning message	-	-	-
	Error message	-	-	-
Pump venting function	Yes	-	-	-
Dry-running detection	yes	-	-	-
Equipment
Thermal insulation shell	Yes	-	-	-
Cold water insulation shell	As accessories	-	-	-
Quick electrical connection	Wilo Connector	-	Wilo plug	-
Connectivity
Analogue signal as standard	0-10 V	-	-	-
	2-10 V	-	-	-
	4-20 mA	-	-	-
	0-20 mA	-	-	-
	PT1000	-	-	-
Digital output	SSM	-	SSM	-
	SBM	-	-	-
	-	-	SBM (via Connect module)	-
Digital input	Ext. OFF	-	-	-
	Ext. MIN	-	-	-
	Ext. MAX	-	-	-
	MANUAL (BMS-OFF)	-	-	-
	Key lock	-	-	-
	Switchover between heating/cooling mode	-	-	-
	-	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
Bus communication via additional accessories	BACnet MS/TP	-	-	-
	LON	-	-	-
	Modbus RTU	-	-	-
	CANopen	-	-	-
	PLR	-	-	-
	BACnet IP	-	-	-
	Modbus TCP	-	-	-
Access via the Wilo-Assistant app	No	-	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	-	-
wire data exchange and remote operation	Bluetooth	-	-	-
Motor data
Phases	1	3	1	3
Mains connection	1~230 V, 50/60 Hz	3~400 V, 50 Hz	1~230 V, 50/60 Hz	3~400 V, 50 Hz
Energy efficiency index (EEI)	≤0.19	-	≤0.20	-
Min current I_min	0.11 A	0.15 A	0.08 A	-
Max current I_max	1.05 A	0.72 A	1 A	-
Rated power P₂	133 W	180 W	85 W	-
Min. speed n_min	750 1/min	2050 1/min	1000 1/min	-
Max. speed n_max	3600 1/min	2700 1/min	3700 1/min	-
Power consumption P_{1 min}	7 W	100 W	5 W	-
Power consumption P_{1 max}	160 W	310 W	120 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61000-6-3	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61000-6-2	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Electromagnetic compatibility	-	EN 61800-3	-	-
Insulation class	F	H	F	-
Protection class	IPX4D	IPX4D	IPX4D	-
Materials
Material	Stainless steel	Bronze, CC499K	Stainless steel	-
Impeller	PPS-GF40	PPE-GF30	PPS-GF40	-
Shaft	Stainless steel	Stainless steel	Stainless steel	-
Bearing	Carbon-graphite	Carbon, synthetic resin-impregnated	Carbon, synthetic resin-impregnated	-
Pipe connection
Inlet connection	G 2	G 2	G 2	Rp 1
PN connection on suction side	PN 10	PN 10	PN 10	PN 10
Outlet connection	G 2	G 2	G 2	Rp 1
PN connection on discharge side	PN 10	PN 10	PN 10	PN 10
Dimension, weight
Length with packaging	400 mm	270 mm	300 mm	-
Length L	335 mm	180 mm	203 mm	-
Height with packaging	263 mm	215 mm	394 mm	-
Height H	180 mm	236 mm	223 mm	-
Width with packaging	300 mm	178 mm	200 mm	-
Width W	210 mm	176 mm	105 mm	-
Gross weight, approx. m	8.6 kg	5.9 kg	5.3 kg	-
Net weight, approx. m	7.5 kg	5.5 kg	4.3 kg	-
Ordering information
Product description	Stratos MAXO-Z 30/0,5-8 PN 10	TOP-Z 30/7 (3~400 V, PN 10, RG)	Yonos MAXO-Z 30/0,5-7 PN 10	ASV 26/4 3-f
Brand	Wilo	Wilo	Wilo	Lowara/Xylem
EAN number	4048482700120	4016322709640	4048482739847	-
Article number	2164670	2048341	2175540	-

Data sheet

Description
Product description	ASV 26/4 3-f
Brand	Lowara/Xylem
Port-to-port length l0	220 mm

Motor data
Phases	3
Mains connection	3~400 V, 50 Hz

Pipe connection
Inlet connection	Rp 1
PN connection on suction side	PN 10
Outlet connection	Rp 1
PN connection on discharge side	PN 10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.